Thanks, KI4JRL here

________________________________ From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com on behalf of Jim Unroe rock.unroe@gmail.com Sent: Monday, September 26, 2016 4:04 AM To: Discussion of CHIRP Subject: Re: [chirp_users] soft ware

On Mon, Sep 26, 2016 at 1:00 AM, Cecil Crowder Sr rodbuster_one@hotmail.com wrote:

soft ware for Bafeng BV-F9V2+ what soft ware do I need ????

Hi Cecil,

According to the Supported Radio Models list on the CHIRP home/wiki page, you can use CHIRP by selecting Baofeng as the Vendor and BF-F8HP as the Model.

BF-F8HP Also includes the BF-A58 Also includes the BF-F9V2+ <-- this is your radio Also includes the GT-3TP Also includes the UV-5RTP Also includes the UV-5R7W

You can also use the Baofeng software for the BF-F8HP.

Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users chirp_users -- Discussion of CHIRP - intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users intrepid.danplanet.com This list is for discussion of CHIRP use, issues, and beta releases. At any point, the latest daily build will be available here: http://trac.chirp.danplanet.com ...

This message was sent to Cecil Crowder Sr at rodbuster_one@hotmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com