[chirp_users] UV-82c newbie
Would anyone know the proper settings or what I'm missing to program my radio to work with my current land mobile frequencies? I do not use a repeater. Thanks. Sent from my iPhone
Hi Andrew, What are the problems you are having? Did you download from the radio first? That is always the first step. Glenn ----- Original Message ----- From: "Andrew Jones" charlesandrewjones@gmail.com To: chirp_users@intrepid.danplanet.com Sent: Monday, September 11, 2023 1:25 PM Subject: [chirp_users] UV-82c newbie
Would anyone know the proper settings or what I'm missing to program my radio to work with my current land mobile frequencies? I do not use a repeater. Thanks. Sent from my iPhone _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
On Mon, Sep 11, 2023 at 2:26 PM Andrew Jones charlesandrewjones@gmail.com wrote:
Would anyone know the proper settings or what I'm missing to program my radio to work with my current land mobile frequencies? I do not use a repeater. Thanks.
It has to be programmed with the same frequency. If the "current land mobile" setup uses selective squelch (a CTCSS tone or DCS code), then you have to program the matching tone/code into your radio. Without it, your UV-82C will not be able to open the squelch of the other radios, preventing the other radio users from hearing your transmissions.
Jim KC9HI
participants (3)
-
Andrew Jones -
Jim Unroe -
K0LNY