Re: [chirp_users] Version of Baofeng UV-5R not supported by CHIRP?
I think no matter what radio you are programming you always need to download from the radio first. Jock KC6IIH
In a message dated 10/24/2012 9:19:40 A.M. Pacific Daylight Time, ghalejr@gmail.com writes:
I was able to successfully use the latest daily build on both my 251, and 291 versions of UV-5R. What you cannot do, is load one radio, then go to the other radio, and load it. When you go to the other version, you need to download from the radio, the open the file with all your saved info, and upload it to the new radio. In other words, download from the radio, even if you do not intend to use the file, that seems to be what tells chirp what version radio you have.
George
On Wed, Oct 24, 2012 at 7:08 AM, Steve Kompier <_skompier@gmail.com_ (mailto:skompier@gmail.com) > wrote:
Chirp will not work with BFB291. Go here and get software _http://www.miklor.com/uv5r/UV5R-Software.html_ (http://www.miklor.com/uv5r/UV5R-Software.html)
On Wed, Oct 24, 2012 at 6:32 AM, Kc6iih <_Kc6iih@aol.com_ (mailto:Kc6iih@aol.com) > wrote:
I read something about there being diffrent versions which require separate programming software. I think it was on the Baeofeng USA website.
Jock KC6IIH
Sent from my Samsung Galaxy Tab JOCK KC6IIH
Michael Collinson <_training@bigpond.net.au_ (mailto:training@bigpond.net.au) > wrote: I have had success using both CHIRP and Baofeng software in downloading and uploading from a Baofeng UV-5R, Version BFB 251 120702 VER-05 which belongs to a mate. However, my own model UV-5R, Version BFB 291 120828N B5R0001 does not respond. Any suggestions? Regards,
Mike
_______________________________________________ chirp_users mailing list _chirp_users@intrepid.danplanet.com_ (mailto:chirp_users@intrepid.danplanet.com) _http://intrepid.danplanet.com/mailman/listinfo/chirp_users_ (http://intrepid.danplanet.com/mailman/listinfo/chirp_users)
_______________________________________________ chirp_users mailing list _chirp_users@intrepid.danplanet.com_ (mailto:chirp_users@intrepid.danplanet.com) _http://intrepid.danplanet.com/mailman/listinfo/chirp_users_ (http://intrepid.danplanet.com/mailman/listinfo/chirp_users)
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
I don't think that is true of all radios. There is nothing in the radio that precludes writing to it on hookup other than the initial handshake.
73,
Alan - W6ARH
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Kc6iih@aol.com Sent: Wednesday, October 24, 2012 9:56 AM To: chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] Version of Baofeng UV-5R not supported by CHIRP?
I think no matter what radio you are programming you always need to download from the radio first.
Jock KC6IIH
In a message dated 10/24/2012 9:19:40 A.M. Pacific Daylight Time, ghalejr@gmail.com writes:
I was able to successfully use the latest daily build on both my 251, and 291 versions of UV-5R. What you cannot do, is load one radio, then go to the other radio, and load it. When you go to the other version, you need to download from the radio, the open the file with all your saved info, and upload it to the new radio. In other words, download from the radio, even if you do not intend to use the file, that seems to be what tells chirp what version radio you have.
George
On Wed, Oct 24, 2012 at 7:08 AM, Steve Kompier skompier@gmail.com wrote:
Chirp will not work with BFB291. Go here and get software http://www.miklor.com/uv5r/UV5R-Software.html
On Wed, Oct 24, 2012 at 6:32 AM, Kc6iih Kc6iih@aol.com wrote:
I read something about there being diffrent versions which require separate programming software.
I think it was on the Baeofeng USA website.
Jock KC6IIH
Sent from my Samsung Galaxy Tab JOCK KC6IIH
Michael Collinson training@bigpond.net.au wrote:
I have had success using both CHIRP and Baofeng software in downloading and uploading from a Baofeng UV-5R, Version BFB 251 120702 VER-05 which belongs to a mate.
However, my own model UV-5R, Version BFB 291 120828N B5R0001 does not respond. Any suggestions?
Regards,
Mike
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
Mike,
CHIRP is compatible with all Firmware versions of the UV-5R.
You will needs to run the CHIRP Daily Build 20121013 or later.
Check here for details:
http://www.miklor.com/uv5r/UV5R-CHIRP.html
John K3NXU
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of The Silver Fox Sent: Wednesday, October 24, 2012 1:49 PM To: 'Discussion of CHIRP' Subject: Re: [chirp_users] Version of Baofeng UV-5R not supported by CHIRP?
I don't think that is true of all radios. There is nothing in the radio that precludes writing to it on hookup other than the initial handshake.
73,
Alan - W6ARH
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Kc6iih@aol.com Sent: Wednesday, October 24, 2012 9:56 AM To: chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] Version of Baofeng UV-5R not supported by CHIRP?
I think no matter what radio you are programming you always need to download from the radio first.
Jock KC6IIH
In a message dated 10/24/2012 9:19:40 A.M. Pacific Daylight Time, ghalejr@gmail.com writes:
I was able to successfully use the latest daily build on both my 251, and 291 versions of UV-5R. What you cannot do, is load one radio, then go to the other radio, and load it. When you go to the other version, you need to download from the radio, the open the file with all your saved info, and upload it to the new radio. In other words, download from the radio, even if you do not intend to use the file, that seems to be what tells chirp what version radio you have.
George
On Wed, Oct 24, 2012 at 7:08 AM, Steve Kompier skompier@gmail.com wrote:
Chirp will not work with BFB291. Go here and get software http://www.miklor.com/uv5r/UV5R-Software.html
On Wed, Oct 24, 2012 at 6:32 AM, Kc6iih Kc6iih@aol.com wrote:
I read something about there being diffrent versions which require separate programming software.
I think it was on the Baeofeng USA website.
Jock KC6IIH
Sent from my Samsung Galaxy Tab JOCK KC6IIH
Michael Collinson training@bigpond.net.au wrote:
I have had success using both CHIRP and Baofeng software in downloading and uploading from a Baofeng UV-5R, Version BFB 251 120702 VER-05 which belongs to a mate.
However, my own model UV-5R, Version BFB 291 120828N B5R0001 does not respond. Any suggestions?
Regards,
Mike
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
participants (3)
-
John LaMartina -
Kc6iih＠aol.com -
The Silver Fox