[chirp_users] Yaesu FT-450D
I'm not getting chirp to communicate with my Yaesu FT-450D and I'm suspecting it's a baud rate issue. My 450D is at the factory default of 4800 baud, and I don't know what chirp uses by default or how to change it's default. I have no problem changing the radio to match what chirp is expecting, but I'd rather not do it by trial-and-error.... So, can anyone tell me what baud rate chirp is using? Thanks!
-Farren / KB0AZJ
The Computer Shed Business Computer Services 785.747.8100
If you are using Windows, use device manager to see what come port you are using. Check properties, and I think advanced. That will show you the speed that com port is set at. Also check to see if your cable is a Prolific. If it is, roll your driver back to 3.2.0.0. See www.miklor.com for more info.
Jardy Dawson WA7JRD Message sent through sub space hailing frequencies using the Universal Translator.
On Feb 11, 2019, at 09:30, Farren Constable farren@computershed.com wrote:
I'm not getting chirp to communicate with my Yaesu FT-450D and I'm suspecting it's a baud rate issue. My 450D is at the factory default of 4800 baud, and I don't know what chirp uses by default or how to change it's default. I have no problem changing the radio to match what chirp is expecting, but I'd rather not do it by trial-and-error.... So, can anyone tell me what baud rate chirp is using? Thanks!
-Farren / KB0AZJ
The Computer Shed Business Computer Services 785.747.8100
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Thanks. I'm trying to use chirp through my Yaesu SCU-17 interface box which has serial ports and a sound card. All my apps use that interface for CAT control so I assumed it should work with chirp. It uses a Silicon Labs Dual CP2105 USB to UART bridge and a Silicon Labs driver version 6.7.4.261. And the settings on that port in the device manager match the radio: 4800,8,N,1. Although I'm not so sure on the flow control. In fldigi, for example, I need to enable RTS/CTS flow control for CAT to work. But, in the device manager, the only options for flow control are None, Hardware, or Xon/Xoff.
-Farren / KB0AZJ
The Computer Shed Business Computer Services 785.747.8100
On Mon, Feb 11, 2019 at 12:04 PM Jardy via chirp_users < chirp_users@intrepid.danplanet.com> wrote:
If you are using Windows, use device manager to see what come port you are using. Check properties, and I think advanced. That will show you the speed that com port is set at. Also check to see if your cable is a Prolific. If it is, roll your driver back to 3.2.0.0. See www.miklor.com for more info.
Jardy Dawson WA7JRD Message sent through sub space hailing frequencies using the Universal Translator.
On Feb 11, 2019, at 09:30, Farren Constable farren@computershed.com wrote:
I'm not getting chirp to communicate with my Yaesu FT-450D and I'm suspecting it's a baud rate issue. My 450D is at the factory default of 4800 baud, and I don't know what chirp uses by default or how to change it's default. I have no problem changing the radio to match what chirp is expecting, but I'd rather not do it by trial-and-error.... So, can anyone tell me what baud rate chirp is using? Thanks!
-Farren / KB0AZJ
The Computer Shed Business Computer Services 785.747.8100
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Farren at farren@computershed.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (2)
-
Farren Constable -
Jardy