Thank you. It is indeed a chirp setting  under 'basic settings'

Cheers, Frits.

On 28/02/20 9:04 pm, Mark Eisner wrote:

There is a setting to select what is displayed. Channel name, channel number and frequency are the options. I can’t remember exactly where it is but you can set it in chirp independently for both the A and B channels.

On Fri, 28 Feb 2020 at 12:02, Frits Schouten <frits.schouten@gmail.com mailto:frits.schouten@gmail.com> wrote:

Hello all,

I've just received my new UV-9R PLUS and copied the channels from
my old
UV-5R onto it.
That went actually very painless.
Now my question is: why are the channel names not shown on the UV-9R?
I am in channel mode and the channel names are shown on the chirp
software.

What am I missing here.

Regards,
Frits Schouten.
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
<mailto:chirp_users@intrepid.danplanet.com>
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Mark Eisner at mark@theeisners.co.uk
<mailto:mark@theeisners.co.uk>
To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
<mailto:chirp_users-unsubscribe@intrepid.danplanet.com>

-- Mark Eisner mark@theeisne.rs mailto:mark@theeisne.rs

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to ZASCHF at frits.schouten@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com