[chirp_users] Importing / updating Error Icom 7100
Hi,
My first few weeks of using CHIRP,
What I am seeing is when I update from file it will change the offset on EXISTING saved frequencies/channels.
For instance I have 146.345 with 1.035 as the dup offset minus. after an update from a backup file it will set everything to 5000/default, even saved channels.
Am I doing something wrong? Do you need me to send samples?
Old UNIX programmer, happy to help if I am not too outdated.
George
Hi George,
It looks like this is a somewhat known issue. There are two similar issues filed in the tracker:
http://chirp.danplanet.com/issues/5023 http://chirp.danplanet.com/issues/4113
The driver hasn't been touched since IC-7100 support was added, and it definitely wasn't setup to handle offsets.
Perhaps have a go at fixing it yourself, if you are interested! It should be a minor change.
http://chirp.danplanet.com/projects/chirp/wiki/Developers
If not feeling development inclined, at least file a ticket that describes your specific symptoms or add to one of the existing ones, and if you can include some memory dumps with some known offsets in some of the saved channels, that would likely help.
-- Brian AF7MD
On Tue, Aug 1, 2017 at 12:53 PM, George M. Collins george@kptv.us wrote:
Hi,
My first few weeks of using CHIRP,
What I am seeing is when I update from file it will change the offset on EXISTING saved frequencies/channels.
For instance I have 146.345 with 1.035 as the dup offset minus. after an update from a backup file it will set everything to 5000/default, even saved channels.
Am I doing something wrong? Do you need me to send samples?
Old UNIX programmer, happy to help if I am not too outdated.
George
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Brian Dickman at brian.maybe@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (2)
-
Brian Dickman -
George M. Collins