[chirp_users] pasting an Excel spreadsheet to my Chirp page to program frequencies from it
I have an Excel spreadsheet with a list of frequencies, PL Tones etc. and would like to program my BTECH UV-25x2. Please advise
Someone might suggest another rout, but I would go into Excel and save it as a .CVS file, and then import that into Chirp. Glenn
----- Original Message ----- From: Dwayne Elliott To: chirp_users@intrepid.danplanet.com Sent: Friday, December 08, 2017 8:17 PM Subject: [chirp_users] pasting an Excel spreadsheet to my Chirp page to program frequencies from it
I have an Excel spreadsheet with a list of frequencies, PL Tones etc. and would like to program my BTECH UV-25x2. Please advise
That is, .CSV file. Make sure that you exit Excel before trying to import it. Glenn ----- Original Message ----- From: Glenn At Home To: Discussion of CHIRP Sent: Friday, December 08, 2017 8:37 PM Subject: Re: [chirp_users] pasting an Excel spreadsheet to my Chirp page toprogram frequencies from it
Someone might suggest another rout, but I would go into Excel and save it as a .CVS file, and then import that into Chirp. Glenn
----- Original Message ----- From: Dwayne Elliott To: chirp_users@intrepid.danplanet.com Sent: Friday, December 08, 2017 8:17 PM Subject: [chirp_users] pasting an Excel spreadsheet to my Chirp page to program frequencies from it
I have an Excel spreadsheet with a list of frequencies, PL Tones etc. and would like to program my BTECH UV-25x2. Please advise
MS-DOS type or what type of .cvs?
On Fri, Dec 8, 2017 at 6:37 PM Glenn At Home GlennErvin@cableone.net wrote:
Someone might suggest another rout, but I would go into Excel and save it as a .CVS file, and then import that into Chirp. Glenn
----- Original Message ----- *From:* Dwayne Elliott ke6pls2@gmail.com *To:* chirp_users@intrepid.danplanet.com *Sent:* Friday, December 08, 2017 8:17 PM *Subject:* [chirp_users] pasting an Excel spreadsheet to my Chirp page to program frequencies from it
I have an Excel spreadsheet with a list of frequencies, PL Tones etc. and would like to program my BTECH UV-25x2. Please advise
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dwayne Elliott at ke6pls2@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On Fri, Dec 8, 2017 at 9:17 PM, Dwayne Elliott ke6pls2@gmail.com wrote:
I have an Excel spreadsheet with a list of frequencies, PL Tones etc. and would like to program my BTECH UV-25x2. Please advise
Download from your UV-25X2 into CHIRP. Export the tab that was just created to a CSV file. Load that CSV file into Excel. That will show you the format that the spreadsheet needs to be in so that it can be imported into a tab that is compatible with your radio.
Jim KC9HI
participants (3)
-
Dwayne Elliott -
Glenn At Home -
Jim Unroe