[chirp_users] John Barker-AnyTone 5888UV-Change Squelch
This is my first post so I hope I'm doing it right. Can you change the squelch on the above radio using CHIRP?
Thanks
John
KG7LUB
Change the squelch in what way?
On Tue, Apr 21, 2020 at 11:58 AM John Barker john@jabarker.net wrote:
This is my first post so I hope I’m doing it right. Can you change the squelch on the above radio using CHIRP?
Thanks
John
KG7LUB _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Wuest at jhwuest@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Squelch, if it's there, is under the settings tab.
On 22 April 2020 at 16:07 John Wuest jhwuest@gmail.com wrote:
Change the squelch in what way? On Tue, Apr 21, 2020 at 11:58 AM John Barker < john@jabarker.net mailto:john@jabarker.net > wrote: > >This is my first post so I hope I’m doing it right. Can you change the squelch on the above radio using CHIRP? Thanks John KG7LUB _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Wuest at jhwuest@gmail.com mailto:jhwuest@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com > _______________________________________________chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net
Where is the settings tab?
Thanks
John
From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of Nigel A. Gunn G8IFF/W8IFF Sent: Wednesday, April 22, 2020 1:44 PM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com; John Wuest jhwuest@gmail.com Subject: Re: [chirp_users] John Barker-AnyTone 5888UV-Change Squelch
Squelch, if it's there, is under the settings tab.
On 22 April 2020 at 16:07 John Wuest <jhwuest@gmail.com mailto:jhwuest@gmail.com > wrote:
Change the squelch in what way?
On Tue, Apr 21, 2020 at 11:58 AM John Barker < john@jabarker.net mailto:john@jabarker.net > wrote:
This is my first post so I hope I’m doing it right. Can you change the squelch on the above radio using CHIRP?
Thanks
John
KG7LUB
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Wuest at jhwuest@gmail.com mailto:jhwuest@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net mailto:nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net mailto:nigel@ngunn.net www http://www.ngunn.net
Left hand side of the main page.
On 22 April 2020 at 18:14 John Barker john@jabarker.net wrote:
Where is the settings tab? Thanks John From: chirp_users-bounces@intrepid.danplanet.com <chirp_users-bounces@intrepid.danplanet.com> On Behalf Of Nigel A. Gunn G8IFF/W8IFF Sent: Wednesday, April 22, 2020 1:44 PM To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>; John Wuest <jhwuest@gmail.com> Subject: Re: [chirp_users] John Barker-AnyTone 5888UV-Change Squelch Squelch, if it's there, is under the settings tab. > >On 22 April 2020 at 16:07 John Wuest <jhwuest@gmail.com mailto:jhwuest@gmail.com > wrote: Change the squelch in what way? On Tue, Apr 21, 2020 at 11:58 AM John Barker < john@jabarker.net mailto:john@jabarker.net > wrote: > > >This is my first post so I hope I’m doing it right. Can you change the squelch on the above radio using CHIRP? Thanks John KG7LUB _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Wuest at jhwuest@gmail.com mailto:jhwuest@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com > >_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net mailto:nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com >Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net mailto:nigel@ngunn.net www http://www.ngunn.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net
Far left side of screen.
Jardy Dawson WA7JRD
Message sent by....Oh, who the heck cares, anyway? Could be my shoelaces, as far as I care!
On Apr 22, 2020, at 15:16, John Barker john@jabarker.net wrote:
Where is the settings tab? Thanks John
From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of Nigel A. Gunn G8IFF/W8IFF Sent: Wednesday, April 22, 2020 1:44 PM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com; John Wuest jhwuest@gmail.com Subject: Re: [chirp_users] John Barker-AnyTone 5888UV-Change Squelch
Squelch, if it's there, is under the settings tab. On 22 April 2020 at 16:07 John Wuest jhwuest@gmail.com wrote:
Change the squelch in what way?
On Tue, Apr 21, 2020 at 11:58 AM John Barker < john@jabarker.net> wrote: This is my first post so I hope I’m doing it right. Can you change the squelch on the above radio using CHIRP?
Thanks
John
KG7LUB
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Wuest at jhwuest@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
I believe the squelch levels span the frequency spectrum rather than being channel-specific. I know that is the case on my Baofeng UV-XR. The Baofengs' squelch levels need to be reduced drastically by programming them on the CHIRP Settings pages. Chris Knowles, N1CAK
On 4/22/2020 6:14 PM, John Barker wrote:
Where is the settings tab?
Thanks
John
*From:* chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com *On Behalf Of *Nigel A. Gunn G8IFF/W8IFF *Sent:* Wednesday, April 22, 2020 1:44 PM *To:* Discussion of CHIRP chirp_users@intrepid.danplanet.com; John Wuest jhwuest@gmail.com *Subject:* Re: [chirp_users] John Barker-AnyTone 5888UV-Change Squelch
Squelch, if it's there, is under the settings tab.
On 22 April 2020 at 16:07 John Wuest <jhwuest@gmail.com <mailto:jhwuest@gmail.com>> wrote: Change the squelch in what way? On Tue, Apr 21, 2020 at 11:58 AM John Barker < john@jabarker.net <mailto:john@jabarker.net>> wrote: This is my first post so I hope I’m doing it right. Can you change the squelch on the above radio using CHIRP? Thanks John KG7LUB _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Wuest at jhwuest@gmail.com <mailto:jhwuest@gmail.com> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net <mailto:nigel@ngunn.net> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com>Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net mailto:nigel@ngunn.net www http://www.ngunn.net
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Christopher Knowles at cknowles@tiac.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
I believe the squelch levels span the frequency spectrum rather than being channel-specific. I know that is the case on my Baofeng UV-XR. The Baofengs' squelch levels need to be reduced drastically by programming them on the CHIRP Settings pages. Chris Knowles, N1CAK
On 4/22/2020 6:14 PM, John Barker wrote:
Where is the settings tab?
Thanks
John
*From:* chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com *On Behalf Of *Nigel A. Gunn G8IFF/W8IFF *Sent:* Wednesday, April 22, 2020 1:44 PM *To:* Discussion of CHIRP chirp_users@intrepid.danplanet.com; John Wuest jhwuest@gmail.com *Subject:* Re: [chirp_users] John Barker-AnyTone 5888UV-Change Squelch
Squelch, if it's there, is under the settings tab.
On 22 April 2020 at 16:07 John Wuest <jhwuest@gmail.com <mailto:jhwuest@gmail.com>> wrote: Change the squelch in what way? On Tue, Apr 21, 2020 at 11:58 AM John Barker < john@jabarker.net <mailto:john@jabarker.net>> wrote: This is my first post so I hope I’m doing it right. Can you change the squelch on the above radio using CHIRP? Thanks John KG7LUB _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Wuest at jhwuest@gmail.com <mailto:jhwuest@gmail.com> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net <mailto:nigel@ngunn.net> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com>Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net mailto:nigel@ngunn.net www http://www.ngunn.net
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Christopher Knowles atcknowles@tiac.net To unsubscribe, send an email tochirp_users-unsubscribe@intrepid.danplanet.com
I would like to increase the squelch on 1 channel that I’m having a problem with
Thanks
John
From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of John Wuest Sent: Wednesday, April 22, 2020 1:07 PM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] John Barker-AnyTone 5888UV-Change Squelch
Change the squelch in what way?
On Tue, Apr 21, 2020 at 11:58 AM John Barker <john@jabarker.net mailto:john@jabarker.net > wrote:
This is my first post so I hope I’m doing it right. Can you change the squelch on the above radio using CHIRP?
Thanks
John
KG7LUB
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Wuest at jhwuest@gmail.com mailto:jhwuest@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
participants (5)
-
Christopher Knowles -
Jardy -
John Barker -
John Wuest -
Nigel A. Gunn G8IFF/W8IFF