Hi list,

Using Chirp Daily 20150513:

Just finished programming a batch of Baofeng UV5R N5R2401, N5R2405 and N5R2407. All of these units working fine.

Also using Chirp Daily 20150513: download UV5R radio image from HN5RV01 deleted existing frequencies imported same .csv freq list used on above batch no errors at all reported all seemed OK with import and upload

HN5RV01 Unit transmits ok; transmitted audio ok, RX indicator blue background light works ok when there is carrier received or when hitting the monitor switch, just no receive audio. Tried set of headphones in rec jack -- still no audio. No "Channel Mode" voice with power-on-self-test, either.

Tried the same with Daily 20150530, no errors, no problems indicated; no change - no rx audio.

did keyboard (menu/40) reset, then did reload with Daily 20150530, no errors, no problems indicated; no change - still no rx audio.

Attached image is from this Daily 20150530 .

Any possible settings that could cause this, or DOA audio output?

tnx es 73 de Bill WB2SXY --