[chirp_users] power settings
New on the list..and not sure where the archives are. So, just asking the question.
I have downloaded and installed CHIRP daily-20120919 and the descriptions for the columns doesn't appear to be up to date in the CHIRP guide. For example, there are more columns that are not shown in the guide, ie URCALL (assume my callsign) and RPT1CALL and RPT2CALL (what are these?) and digital code.
What appears to be missing is the power level setting, that is shown in the guide yet is missing in the program.
Is there a better place to be looking for this information?
This e-mail (and any attachments) is confidential and may be privileged. Any unauthorized use, copying, disclosure or dissemination of this communication is prohibited. If you are not the intended recipient, please notify the sender immediately and delete all copies of the message and its attachments.
On Tue, Sep 25, 2012 at 10:27 AM, Harrison Cooper HCooper@fusionio.com wrote:
I have downloaded and installed CHIRP daily-20120919 and the descriptions for the columns doesn’t appear to be up to date in the CHIRP guide. For example, there are more columns that are not shown in the guide, ie URCALL (assume my callsign) and RPT1CALL and RPT2CALL (what are these?) and digital code.
These columns are specific to Dstar and will show for any Dstar radio, or any of the generic formats like CSV.
What appears to be missing is the power level setting, that is shown in the guide yet is missing in the program.
Power level only shows for radios which Chirp knows how to set the power level. What radio didn't show the power column?
Is there a better place to be looking for this information?
You're in the right place! This mailing list is the best place to ask questions.
Tom KD7LXL
Ah..well I have the UV5R, I don't see a place to set for the specific radio type...am I missing a setup step?
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Tom Hayward Sent: Tuesday, September 25, 2012 12:04 PM To: Discussion of CHIRP Subject: Re: [chirp_users] power settings
On Tue, Sep 25, 2012 at 10:27 AM, Harrison Cooper HCooper@fusionio.com wrote:
I have downloaded and installed CHIRP daily-20120919 and the descriptions for the columns doesn’t appear to be up to date in the CHIRP guide. For example, there are more columns that are not shown in the guide, ie URCALL (assume my callsign) and RPT1CALL and RPT2CALL (what are these?) and digital code.
These columns are specific to Dstar and will show for any Dstar radio, or any of the generic formats like CSV.
What appears to be missing is the power level setting, that is shown in the guide yet is missing in the program.
Power level only shows for radios which Chirp knows how to set the power level. What radio didn't show the power column?
Is there a better place to be looking for this information?
You're in the right place! This mailing list is the best place to ask questions.
Tom KD7LXL _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This e-mail (and any attachments) is confidential and may be privileged. Any unauthorized use, copying, disclosure or dissemination of this communication is prohibited. If you are not the intended recipient, please notify the sender immediately and delete all copies of the message and its attachments.
OK....i hadn't plugged in the radio, when I pulled data up from it...now its telling me all the expected columns. Sorry to bother the group!
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Harrison Cooper Sent: Tuesday, September 25, 2012 12:55 PM To: Discussion of CHIRP Subject: Re: [chirp_users] power settings
Ah..well I have the UV5R, I don't see a place to set for the specific radio type...am I missing a setup step?
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Tom Hayward Sent: Tuesday, September 25, 2012 12:04 PM To: Discussion of CHIRP Subject: Re: [chirp_users] power settings
On Tue, Sep 25, 2012 at 10:27 AM, Harrison Cooper HCooper@fusionio.com wrote:
I have downloaded and installed CHIRP daily-20120919 and the descriptions for the columns doesn’t appear to be up to date in the CHIRP guide. For example, there are more columns that are not shown in the guide, ie URCALL (assume my callsign) and RPT1CALL and RPT2CALL (what are these?) and digital code.
These columns are specific to Dstar and will show for any Dstar radio, or any of the generic formats like CSV.
What appears to be missing is the power level setting, that is shown in the guide yet is missing in the program.
Power level only shows for radios which Chirp knows how to set the power level. What radio didn't show the power column?
Is there a better place to be looking for this information?
You're in the right place! This mailing list is the best place to ask questions.
Tom KD7LXL _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This e-mail (and any attachments) is confidential and may be privileged. Any unauthorized use, copying, disclosure or dissemination of this communication is prohibited. If you are not the intended recipient, please notify the sender immediately and delete all copies of the message and its attachments. _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
even though you can see that power column, it is still somewhat ethereal--you can't trust it to dump its contents reliably. look back in the messages about <100 or so and there should be a dozen or more discussing the behavior.
/guy (73 de kg5vt)
On Tue, Sep 25, 2012 at 2:11 PM, Harrison Cooper HCooper@fusionio.comwrote:
OK....i hadn't plugged in the radio, when I pulled data up from it...now its telling me all the expected columns. Sorry to bother the group!
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto: chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Harrison Cooper Sent: Tuesday, September 25, 2012 12:55 PM To: Discussion of CHIRP Subject: Re: [chirp_users] power settings
Ah..well I have the UV5R, I don't see a place to set for the specific radio type...am I missing a setup step?
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto: chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Tom Hayward Sent: Tuesday, September 25, 2012 12:04 PM To: Discussion of CHIRP Subject: Re: [chirp_users] power settings
On Tue, Sep 25, 2012 at 10:27 AM, Harrison Cooper HCooper@fusionio.com wrote:
I have downloaded and installed CHIRP daily-20120919 and the descriptions for the columns doesn’t appear to be up to date in the CHIRP guide. For example, there are more columns that are not shown in the guide, ie URCALL (assume my callsign) and RPT1CALL and RPT2CALL (what are these?) and digital code.
These columns are specific to Dstar and will show for any Dstar radio, or any of the generic formats like CSV.
What appears to be missing is the power level setting, that is shown in the guide yet is missing in the program.
Power level only shows for radios which Chirp knows how to set the power level. What radio didn't show the power column?
Is there a better place to be looking for this information?
You're in the right place! This mailing list is the best place to ask questions.
Tom KD7LXL _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This e-mail (and any attachments) is confidential and may be privileged. Any unauthorized use, copying, disclosure or dissemination of this communication is prohibited. If you are not the intended recipient, please notify the sender immediately and delete all copies of the message and its attachments. _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
Guy,
I haven't been able to repro any unreliability, How were you doing it?
--Shawn --KF7WXG
On 9/25/2012 1:10 PM, Guy Teague wrote:
even though you can see that power column, it is still somewhat ethereal--you can't trust it to dump its contents reliably. look back in the messages about <100 or so and there should be a dozen or more discussing the behavior.
/guy (73 de kg5vt)
On Tue, Sep 25, 2012 at 2:11 PM, Harrison Cooper <HCooper@fusionio.com mailto:HCooper@fusionio.com> wrote:
OK....i hadn't plugged in the radio, when I pulled data up from it...now its telling me all the expected columns. Sorry to bother the group! -----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com <mailto:chirp_users-bounces@intrepid.danplanet.com> [mailto:chirp_users-bounces@intrepid.danplanet.com <mailto:chirp_users-bounces@intrepid.danplanet.com>] On Behalf Of Harrison Cooper Sent: Tuesday, September 25, 2012 12:55 PM To: Discussion of CHIRP Subject: Re: [chirp_users] power settings Ah..well I have the UV5R, I don't see a place to set for the specific radio type...am I missing a setup step? -----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com <mailto:chirp_users-bounces@intrepid.danplanet.com> [mailto:chirp_users-bounces@intrepid.danplanet.com <mailto:chirp_users-bounces@intrepid.danplanet.com>] On Behalf Of Tom Hayward Sent: Tuesday, September 25, 2012 12:04 PM To: Discussion of CHIRP Subject: Re: [chirp_users] power settings On Tue, Sep 25, 2012 at 10:27 AM, Harrison Cooper <HCooper@fusionio.com <mailto:HCooper@fusionio.com>> wrote: > > I have downloaded and installed CHIRP daily-20120919 and the > descriptions for the columns doesn’t appear to be up to date in the > CHIRP guide. For example, there are more columns that are not shown > in the guide, ie URCALL (assume my callsign) and RPT1CALL and > RPT2CALL (what are these?) and digital code. These columns are specific to Dstar and will show for any Dstar radio, or any of the generic formats like CSV. > What appears to be missing is the power level setting, that is shown > in the guide yet is missing in the program. Power level only shows for radios which Chirp knows how to set the power level. What radio didn't show the power column? > Is there a better place to be looking for this information? You're in the right place! This mailing list is the best place to ask questions. Tom KD7LXL
participants (4)
-
Guy Teague -
Harrison Cooper -
shawn -
Tom Hayward