Unsubscribe

Sent from Tom's iPhone

On Mar 30, 2017, at 9:53 AM, Doc Stevens docstevens@bellsouth.net wrote:

I have a Baofeng HT, probably made in same factory as the Profung. A lot of issues with program cables for all these units. I purchased mine from Baofeng, no "Chinese" knock off, and worked right out of the package. My HT is great, easy to program, versatile, and fun. Hope you enjoy yours.

----- Original Message ----- From: Joseph. D. Meaux, Jr. To: chirp_users@intrepid.danplanet.com Sent: Thursday, March 30, 2017 10:42 AM Subject: [chirp_users] Pofung UV-6R

As I was just getting restarted into Amateur Radio after 40 years, i decided to purchase a Baofeng UV-5 on Amazon. However, thinking I would be doing better by getting a newer model, I purchased a Pofung UV-6R. Nice little radio for 2M/70cm. However, it had one of the worst manuals I have seen; no explanations of specific items in the menus nor explanations of adjustments.

I ordered an adapter cable and downloaded Chirp figuring I could do most of my adjustments in memory via software. I used the forums and read everything I could about the Baofeng. The one thing I kept running across was that several people had to conncet and reconnect the cable to their computer to get Chirp to recognize the radio. Okay, that was something to remember.

I received my OEM cable in the mail and tried to use it. My computer would not recognize the radio. Was it Chirp or was it the cable? I did some research about the cable and learned that occasionally an error was made in manufacturing when soldering the usb modal. The receive and transmit wires were soldered backwards.

A fairly quick solution was to open the usb connector and properly resolder the wires. Eureka, its alive. Once I connected the cable back into my computer, Chirp recognized the radio and I was up and running.

jdmeaux

Moe K2JDM _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Doc Stevens at docstevens@bellsouth.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to tbkell@mchsi.com at tbkell@mchsi.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com