[chirp_users] TYT 9800 Offset saving
I have noticed multiple bug reports for this issue but not sure if there is a resolution. WHen programming a TYT9800 (i have the "plus" with repeaters, The offset is not saved properly to the memory. I believe that it actually saves the TX/RX frequencies so the repeater will work as long as you do not change anything. As soon as you enter the menu and save something, it breaks and can not be resolved from the radio.
here is a link to the tyt bugs, the first few are all about this issue http://chirp.danplanet.com/projects/chirp/issues?set_filter=1&f%5B%5D=su...
Still no response regarding the TYT9800 offset saving bug.
On Tue, Nov 7, 2017 at 12:31 PM Alec DiAstra alecdiastra@gmail.com wrote:
I have noticed multiple bug reports for this issue but not sure if there is a resolution. WHen programming a TYT9800 (i have the "plus" with repeaters, The offset is not saved properly to the memory. I believe that it actually saves the TX/RX frequencies so the repeater will work as long as you do not change anything. As soon as you enter the menu and save something, it breaks and can not be resolved from the radio.
here is a link to the tyt bugs, the first few are all about this issue
http://chirp.danplanet.com/projects/chirp/issues?set_filter=1&f%5B%5D=su...
Perhaps nobody else has seen the bug.
Why do you seem to feel that somebody else is obligated to solve your problem?
On 09 November 2017 at 16:32 Alec DiAstra alecdiastra@gmail.com wrote:
Still no response regarding the TYT9800 offset saving bug. On Tue, Nov 7, 2017 at 12:31 PM Alec DiAstra <alecdiastra@gmail.com mailto:alecdiastra@gmail.com > wrote: > >>
There are multiple issues open for this bug. I'm not the only one.
On Thu, Nov 9, 2017, 2:43 PM Nigel A. Gunn G8IFF/W8IFF nigel@ngunn.net wrote:
Perhaps nobody else has seen the bug.
Why do you seem to feel that somebody else is obligated to solve your problem?
On 09 November 2017 at 16:32 Alec DiAstra alecdiastra@gmail.com wrote:
Still no response regarding the TYT9800 offset saving bug.
On Tue, Nov 7, 2017 at 12:31 PM Alec DiAstra alecdiastra@gmail.com wrote:
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Alec DiAstra at alecdiastra@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (2)
-
Alec DiAstra -
Nigel A. Gunn G8IFF/W8IFF