Hi,
Thanks for the fast reply. I tried to change my email from K5HUM@ARRL.NET to Gmail using your site....hope it worked.
Ok....
Next I purchased a cable for my FT-2800 Yaesu but I get a read header error.
Where did you get your cable?
I got the cable from KaWa on E-bay, recommended by another Ham.
This cable also came with a driver but an inspection indicates this driver is identical to the prolithic driver on the IC-2200 driver disk. Why dosent it work?
Unfortunately, Yaesu radios are not very smart and require you to initiate the clone from the radio side once CHIRP is ready. Are you doing this?
Yes, I followed instructions to the letter. Appreciate any other suggestions.
73 Mike
I got the cable from KaWa on E-bay, recommended by another Ham.
Good.
Yes, I followed instructions to the letter. Appreciate any other suggestions.
The 2800 has been problematic for some folks, but I thought we had gotten those issues worked out. Which version are you using?
Just so we're clear, you're hitting the button to initiate the transmission on the radio *after* you have clicked "okay" on chirp and caused it to open the progress box, right? And, you're in clone mode (ready to hit the transmit button) on the radio before clicking okay on chirp, right?
If so, please send me the debug.log file after trying to clone and I'll see if there's anything obvious in there.
participants (2)
-
Dan Smith -
Mike Raymond