Are you using the latest version of Chirp? Try the daily build: http://trac.chirp.danplanet.com/chirp_daily/LATEST/ And what operating system are you using? Look at www.miklor.com for cable and driver info. Those errors to me look like driver errors.

On Thu, May 8, 2014 at 5:50 PM, W8RGB Gary w8rgb@live.com wrote:

Okay. I've Tried the IC-2200H with and without the cloning mode and from VFO. I get these messages:

Right after powere up VFO mode Failed to communicate with the radio: I can't talk to this model

From Clone mode Failed to communicate with the radio: Out of sync with radio

Clone or not Clone mode "Icom Detect" Unable to get radio model

I am using the RT Systems USB-29A cable marked as Maxton IV8 which is, according to RT Systems, ompatible with the IC-2200 and the IC-2300 (no 'H').

I can program my Baofeng just fine with its cable.

So. Just what are the instructions for Chirp with the IC-2200H?

Thanks!

• 73 Gary W8RGB*

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users