[chirp_users] Using chirp with ubuntu 22.04
Hey everyone, I am new to this list, so first off hello. I am trying to get chirp running on my system. I am running Ubuntu 22.04, with all packages current. Chirp is installed via apt, as using snap or flat pack renders it inaccessible with Orca.
The problem, when I download from my Baofeng Uv5r, I get an error that says module ‘collections’ has no attribute callable. Is anyone running Chirp successfully on Ubuntu 22.04? I know that Python 2 is no longer supported. Any help would be greatly appreciated.
Thanks much in advance,
Guy JAWS Certified, 2021, https://www.freedomscientific.com/Training/Certification
Don't install Chirp from the repositories. It's too old.
Go to https://trac.chirp.danplanet.com/chirp_daily/LATEST/ and download and install the flatpak version. You might have to first "sudo apt install flatpak" if you don't already have it.
On 25/05/2022 02:16 Guy Schlosser guyster@bex.net wrote:
Hey everyone, I am new to this list, so first off hello. I am trying to get chirp running on my system. I am running Ubuntu 22.04, with all packages current. Chirp is installed via apt, as using snap or flat pack renders it inaccessible with Orca.
The problem, when I download from my Baofeng Uv5r, I get an error that says module ‘collections’ has no attribute callable. Is anyone running Chirp successfully on Ubuntu 22.04? I know that Python 2 is no longer supported. Any help would be greatly appreciated.
Thanks much in advance,
Guy JAWS Certified, 2021, https://www.freedomscientific.com/Training/Certification _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net
Nigel,
Is CHIRP from the repository accessible?
CHIRP installed with Flatpak is inaccessible because Flatpak is inaccessible.
Certainly for blind users, an old version of CHIRP is much better than the inaccessible flatpak version.
However there is a source tarball here:
https://trac.chirp.danplanet.com/chirp_daily/LATEST/chirp-daily-20220602.tar...
I'll help any blind person install the CHIRP source tar ball.
Nigel, that should be accessible, right?
73
DR N1EA
On Wed, May 25, 2022, 8:40 AM Nigel A. Gunn G8IFF/W8IFF nigel@ngunn.net wrote:
Don't install Chirp from the repositories. It's too old.
Go to https://trac.chirp.danplanet.com/chirp_daily/LATEST/ and download and install the flatpak version. You might have to first "sudo apt install flatpak" if you don't already have it.
On 25/05/2022 02:16 Guy Schlosser guyster@bex.net wrote:
Hey everyone, I am new to this list, so first off hello. I am trying to
get chirp running on my system. I am running Ubuntu 22.04, with all packages current. Chirp is installed via apt, as using snap or flat pack renders it inaccessible with Orca.
The problem, when I download from my Baofeng Uv5r, I get an error that
says module ‘collections’ has no attribute callable. Is anyone running Chirp successfully on Ubuntu 22.04? I know that Python 2 is no longer supported. Any help would be greatly appreciated.
Thanks much in advance,
Guy JAWS Certified, 2021,
https://www.freedomscientific.com/Training/Certification
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email
chirp_users-owner@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
I know nothing about accessibility. Others have reported that other softwares in flatpak format are accessible so I suggest you build it from source. You will still need QT and python2.
On 02/06/2022 18:00 D.J.J. Ring, Jr. n1ea@arrl.net wrote:
Nigel,
Is CHIRP from the repository accessible?
CHIRP installed with Flatpak is inaccessible because Flatpak is inaccessible.
Certainly for blind users, an old version of CHIRP is much better than the inaccessible flatpak version.
However there is a source tarball here:
https://trac.chirp.danplanet.com/chirp_daily/LATEST/chirp-daily-20220602.tar...
I'll help any blind person install the CHIRP source tar ball.
Nigel, that should be accessible, right?
73
DR N1EA
On Wed, May 25, 2022, 8:40 AM Nigel A. Gunn G8IFF/W8IFF nigel@ngunn.net wrote:
Don't install Chirp from the repositories. It's too old.
Go to https://trac.chirp.danplanet.com/chirp_daily/LATEST/ and download and install the flatpak version. You might have to first "sudo apt install flatpak" if you don't already have it.
On 25/05/2022 02:16 Guy Schlosser guyster@bex.net wrote:
Hey everyone, I am new to this list, so first off hello. I am trying to get chirp running on my system. I am running Ubuntu 22.04, with all packages current. Chirp is installed via apt, as using snap or flat pack renders it inaccessible with Orca.
The problem, when I download from my Baofeng Uv5r, I get an error that says module ‘collections’ has no attribute callable. Is anyone running Chirp successfully on Ubuntu 22.04? I know that Python 2 is no longer supported. Any help would be greatly appreciated.
Thanks much in advance,
Guy JAWS Certified, 2021, https://www.freedomscientific.com/Training/Certification _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net
Is QT in Ubuntu 18X by default? I have never installed that in Ubuntu, but Chirp always worked until I couldn't get it from the repository. ----- Original Message ----- From: "Nigel A. Gunn G8IFF/W8IFF" nigel@ngunn.net To: "Discussion of CHIRP" chirp_users@intrepid.danplanet.com; "D.J.J. Ring, Jr." n1ea@arrl.net Sent: Thursday, June 02, 2022 5:19 PM Subject: Re: [chirp_users] Using chirp with ubuntu 22.04
I know nothing about accessibility. Others have reported that other softwares in flatpak format are accessible so I suggest you build it from source. You will still need QT and python2.
On 02/06/2022 18:00 D.J.J. Ring, Jr. n1ea@arrl.net wrote:
Nigel,
Is CHIRP from the repository accessible?
CHIRP installed with Flatpak is inaccessible because Flatpak is inaccessible.
Certainly for blind users, an old version of CHIRP is much better than the inaccessible flatpak version.
However there is a source tarball here:
https://trac.chirp.danplanet.com/chirp_daily/LATEST/chirp-daily-20220602.tar...
I'll help any blind person install the CHIRP source tar ball.
Nigel, that should be accessible, right?
73
DR N1EA
On Wed, May 25, 2022, 8:40 AM Nigel A. Gunn G8IFF/W8IFF nigel@ngunn.net wrote:
Don't install Chirp from the repositories. It's too old.
Go to https://trac.chirp.danplanet.com/chirp_daily/LATEST/ and download and install the flatpak version. You might have to first "sudo apt install flatpak" if you don't already have it.
On 25/05/2022 02:16 Guy Schlosser guyster@bex.net wrote:
Hey everyone, I am new to this list, so first off hello. I am trying
to get chirp running on my system. I am running Ubuntu 22.04, with all packages current. Chirp is installed via apt, as using snap or flat pack renders it inaccessible with Orca.
The problem, when I download from my Baofeng Uv5r, I get an error
that says module ‘collections’ has no attribute callable. Is anyone running Chirp successfully on Ubuntu 22.04? I know that Python 2 is no longer supported. Any help would be greatly appreciated.
Thanks much in advance,
Guy JAWS Certified, 2021,
https://www.freedomscientific.com/Training/Certification
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email
chirp_users-owner@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Type
apt list | grep python-gtk2
To installed the python-gtk2 type
apt install python-gtk2
If python-gtk2 is installed on their linux system, then anyone can build and install chirp from the source code, namely
https://trac.chirp.danplanet.com/chirp_daily/LATEST/chirp-daily-20220602.tar...
in 3 easy steps.
For qt dependencies requirements for flatpak, it depends up how you installed flatpak.
Since your system doesn't even have the command tail - which part of the core utilities - anything is possible.
How many different chirp installs are there on the system?
-- Cinaed
On 6/2/22 15:35, K0LNY_Glenn wrote:
Is QT in Ubuntu 18X by default? I have never installed that in Ubuntu, but Chirp always worked until I couldn't get it from the repository. ----- Original Message ----- From: "Nigel A. Gunn G8IFF/W8IFF" nigel@ngunn.net To: "Discussion of CHIRP" chirp_users@intrepid.danplanet.com; "D.J.J. Ring, Jr." n1ea@arrl.net Sent: Thursday, June 02, 2022 5:19 PM Subject: Re: [chirp_users] Using chirp with ubuntu 22.04
I know nothing about accessibility. Others have reported that other softwares in flatpak format are accessible so I suggest you build it from source. You will still need QT and python2.
On 02/06/2022 18:00 D.J.J. Ring, Jr. n1ea@arrl.net wrote:
Nigel,
Is CHIRP from the repository accessible?
CHIRP installed with Flatpak is inaccessible because Flatpak is inaccessible.
Certainly for blind users, an old version of CHIRP is much better than the inaccessible flatpak version.
However there is a source tarball here:
https://trac.chirp.danplanet.com/chirp_daily/LATEST/chirp-daily-20220602.tar...
I'll help any blind person install the CHIRP source tar ball.
Nigel, that should be accessible, right?
73
DR N1EA
On Wed, May 25, 2022, 8:40 AM Nigel A. Gunn G8IFF/W8IFF nigel@ngunn.net wrote:
Don't install Chirp from the repositories. It's too old.
Go to https://trac.chirp.danplanet.com/chirp_daily/LATEST/ and download and install the flatpak version. You might have to first "sudo apt install flatpak" if you don't already have it.
On 25/05/2022 02:16 Guy Schlosser guyster@bex.net wrote:
Hey everyone, I am new to this list, so first off hello. I am trying
to get chirp running on my system. I am running Ubuntu 22.04, with all packages current. Chirp is installed via apt, as using snap or flat pack renders it inaccessible with Orca.
The problem, when I download from my Baofeng Uv5r, I get an error
that says module ‘collections’ has no attribute callable. Is anyone running Chirp successfully on Ubuntu 22.04? I know that Python 2 is no longer supported. Any help would be greatly appreciated.
Thanks much in advance,
Guy JAWS Certified, 2021,
https://www.freedomscientific.com/Training/Certification
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email
chirp_users-owner@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to cinaed smson at cinaed.simson@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
I think just one that I tried before, using the tar.gz download. I think I tried that last year and it didn't work. Glenn
----- Original Message ----- From: "Cinaed Simson" cinaed.simson@gmail.com To: chirp_users@intrepid.danplanet.com Sent: Thursday, June 02, 2022 8:56 PM Subject: Re: [chirp_users] Using chirp with ubuntu 22.04
Type
apt list | grep python-gtk2
To installed the python-gtk2 type
apt install python-gtk2
If python-gtk2 is installed on their linux system, then anyone can build and install chirp from the source code, namely
https://trac.chirp.danplanet.com/chirp_daily/LATEST/chirp-daily-20220602.tar...
in 3 easy steps.
For qt dependencies requirements for flatpak, it depends up how you installed flatpak.
Since your system doesn't even have the command tail - which part of the core utilities - anything is possible.
How many different chirp installs are there on the system?
-- Cinaed
On 6/2/22 15:35, K0LNY_Glenn wrote:
Is QT in Ubuntu 18X by default? I have never installed that in Ubuntu, but Chirp always worked until I couldn't get it from the repository. ----- Original Message ----- From: "Nigel A. Gunn G8IFF/W8IFF" nigel@ngunn.net To: "Discussion of CHIRP" chirp_users@intrepid.danplanet.com; "D.J.J. Ring, Jr." n1ea@arrl.net Sent: Thursday, June 02, 2022 5:19 PM Subject: Re: [chirp_users] Using chirp with ubuntu 22.04
I know nothing about accessibility. Others have reported that other softwares in flatpak format are accessible so I suggest you build it from source. You will still need QT and python2.
On 02/06/2022 18:00 D.J.J. Ring, Jr. n1ea@arrl.net wrote:
Nigel,
Is CHIRP from the repository accessible?
CHIRP installed with Flatpak is inaccessible because Flatpak is inaccessible.
Certainly for blind users, an old version of CHIRP is much better than the inaccessible flatpak version.
However there is a source tarball here:
https://trac.chirp.danplanet.com/chirp_daily/LATEST/chirp-daily-20220602.tar...
I'll help any blind person install the CHIRP source tar ball.
Nigel, that should be accessible, right?
73
DR N1EA
On Wed, May 25, 2022, 8:40 AM Nigel A. Gunn G8IFF/W8IFF nigel@ngunn.net wrote:
Don't install Chirp from the repositories. It's too old.
Go to https://trac.chirp.danplanet.com/chirp_daily/LATEST/ and download and install the flatpak version. You might have to first "sudo apt install flatpak" if you don't already have it.
On 25/05/2022 02:16 Guy Schlosser guyster@bex.net wrote:
Hey everyone, I am new to this list, so first off hello. I am trying
to get chirp running on my system. I am running Ubuntu 22.04, with all packages current. Chirp is installed via apt, as using snap or flat pack renders it inaccessible with Orca.
The problem, when I download from my Baofeng Uv5r, I get an error
that says module ‘collections’ has no attribute callable. Is anyone running Chirp successfully on Ubuntu 22.04? I know that Python 2 is no longer supported. Any help would be greatly appreciated.
Thanks much in advance,
Guy JAWS Certified, 2021,
https://www.freedomscientific.com/Training/Certification
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email
chirp_users-owner@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to cinaed smson at cinaed.simson@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Cinead, On the first command, I got a message like warning, apt isn't stable in the cli, don't use in scripts. And on the second command, it said it couldn't find python-gtk2 Glenn ----- Original Message ----- From: "Cinaed Simson" cinaed.simson@gmail.com To: chirp_users@intrepid.danplanet.com Sent: Thursday, June 02, 2022 8:56 PM Subject: Re: [chirp_users] Using chirp with ubuntu 22.04
Type
apt list | grep python-gtk2
To installed the python-gtk2 type
apt install python-gtk2
If python-gtk2 is installed on their linux system, then anyone can build and install chirp from the source code, namely
https://trac.chirp.danplanet.com/chirp_daily/LATEST/chirp-daily-20220602.tar...
in 3 easy steps.
For qt dependencies requirements for flatpak, it depends up how you installed flatpak.
Since your system doesn't even have the command tail - which part of the core utilities - anything is possible.
How many different chirp installs are there on the system?
-- Cinaed
On 6/2/22 15:35, K0LNY_Glenn wrote:
Is QT in Ubuntu 18X by default? I have never installed that in Ubuntu, but Chirp always worked until I couldn't get it from the repository. ----- Original Message ----- From: "Nigel A. Gunn G8IFF/W8IFF" nigel@ngunn.net To: "Discussion of CHIRP" chirp_users@intrepid.danplanet.com; "D.J.J. Ring, Jr." n1ea@arrl.net Sent: Thursday, June 02, 2022 5:19 PM Subject: Re: [chirp_users] Using chirp with ubuntu 22.04
I know nothing about accessibility. Others have reported that other softwares in flatpak format are accessible so I suggest you build it from source. You will still need QT and python2.
On 02/06/2022 18:00 D.J.J. Ring, Jr. n1ea@arrl.net wrote:
Nigel,
Is CHIRP from the repository accessible?
CHIRP installed with Flatpak is inaccessible because Flatpak is inaccessible.
Certainly for blind users, an old version of CHIRP is much better than the inaccessible flatpak version.
However there is a source tarball here:
https://trac.chirp.danplanet.com/chirp_daily/LATEST/chirp-daily-20220602.tar...
I'll help any blind person install the CHIRP source tar ball.
Nigel, that should be accessible, right?
73
DR N1EA
On Wed, May 25, 2022, 8:40 AM Nigel A. Gunn G8IFF/W8IFF nigel@ngunn.net wrote:
Don't install Chirp from the repositories. It's too old.
Go to https://trac.chirp.danplanet.com/chirp_daily/LATEST/ and download and install the flatpak version. You might have to first "sudo apt install flatpak" if you don't already have it.
On 25/05/2022 02:16 Guy Schlosser guyster@bex.net wrote:
Hey everyone, I am new to this list, so first off hello. I am trying
to get chirp running on my system. I am running Ubuntu 22.04, with all packages current. Chirp is installed via apt, as using snap or flat pack renders it inaccessible with Orca.
The problem, when I download from my Baofeng Uv5r, I get an error
that says module ‘collections’ has no attribute callable. Is anyone running Chirp successfully on Ubuntu 22.04? I know that Python 2 is no longer supported. Any help would be greatly appreciated.
Thanks much in advance,
Guy JAWS Certified, 2021,
https://www.freedomscientific.com/Training/Certification
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email
chirp_users-owner@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to cinaed smson at cinaed.simson@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
I got the same thing on my Ubuntu 22.04 machine. sudo apt list
apt list | grep python-gtk2 gave the warning about apt not having a stable cli interface. The apt install command gave E: Unable to locate package python-gtk2.
In case interested, the python 3 version of Chirp that I cloned from git was https://github.com%E2%80%BA mpoletiek › py3-CHIRP. This is the version that gave me the most milage. Thanks to everyone for your help, advice and suggestions thus far. I have to do that thing called work in a few hours, so off to bed. Have a great night. https://github.com/mpoletiek/py3-CHIRP
Guy Ke8JYP
On 6/2/22 23:22, K0LNY_Glenn wrote:
Cinead, On the first command, I got a message like warning, apt isn't stable in the cli, don't use in scripts. And on the second command, it said it couldn't find python-gtk2 Glenn ----- Original Message ----- From: "Cinaed Simson"cinaed.simson@gmail.com To:chirp_users@intrepid.danplanet.com Sent: Thursday, June 02, 2022 8:56 PM Subject: Re: [chirp_users] Using chirp with ubuntu 22.04
Type
apt list | grep python-gtk2
To installed the python-gtk2 type
apt install python-gtk2
If python-gtk2 is installed on their linux system, then anyone can build and install chirp from the source code, namely
https://trac.chirp.danplanet.com/chirp_daily/LATEST/chirp-daily-20220602.tar...
in 3 easy steps.
For qt dependencies requirements for flatpak, it depends up how you installed flatpak.
Since your system doesn't even have the command tail - which part of the core utilities - anything is possible.
How many different chirp installs are there on the system?
-- Cinaed
On 6/2/22 15:35, K0LNY_Glenn wrote:
Is QT in Ubuntu 18X by default? I have never installed that in Ubuntu, but Chirp always worked until I couldn't get it from the repository. ----- Original Message ----- From: "Nigel A. Gunn G8IFF/W8IFF"nigel@ngunn.net To: "Discussion of CHIRP"chirp_users@intrepid.danplanet.com; "D.J.J. Ring, Jr."n1ea@arrl.net Sent: Thursday, June 02, 2022 5:19 PM Subject: Re: [chirp_users] Using chirp with ubuntu 22.04
I know nothing about accessibility. Others have reported that other softwares in flatpak format are accessible so I suggest you build it from source. You will still need QT and python2.
On 02/06/2022 18:00 D.J.J. Ring, Jr.n1ea@arrl.net wrote:
Nigel,
Is CHIRP from the repository accessible?
CHIRP installed with Flatpak is inaccessible because Flatpak is inaccessible.
Certainly for blind users, an old version of CHIRP is much better than the inaccessible flatpak version.
However there is a source tarball here:
https://trac.chirp.danplanet.com/chirp_daily/LATEST/chirp-daily-20220602.tar...
I'll help any blind person install the CHIRP source tar ball.
Nigel, that should be accessible, right?
73
DR N1EA
On Wed, May 25, 2022, 8:40 AM Nigel A. Gunn G8IFF/W8IFFnigel@ngunn.net wrote:
Don't install Chirp from the repositories. It's too old.
Go tohttps://trac.chirp.danplanet.com/chirp_daily/LATEST/ and download and install the flatpak version. You might have to first "sudo apt install flatpak" if you don't already have it.
On 25/05/2022 02:16 Guy Schlosserguyster@bex.net wrote:
Hey everyone, I am new to this list, so first off hello. I am trying
to get chirp running on my system. I am running Ubuntu 22.04, with all packages current. Chirp is installed via apt, as using snap or flat pack renders it inaccessible with Orca.
The problem, when I download from my Baofeng Uv5r, I get an error
that says module ‘collections’ has no attribute callable. Is anyone running Chirp successfully on Ubuntu 22.04? I know that Python 2 is no longer supported. Any help would be greatly appreciated.
Thanks much in advance,
Guy JAWS Certified, 2021,
https://www.freedomscientific.com/Training/Certification
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF atnigel@ngunn.net To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email
chirp_users-owner@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mailnigel@ngunn.net www http://www.ngunn.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. atn1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF atnigel@ngunn.net To unsubscribe, send an email tochirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please emailchirp_users-owner@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mailnigel@ngunn.net www http://www.ngunn.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY atglenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to cinaed smson atcinaed.simson@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY atglenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Guy Schlosser atguyster@bex.net To unsubscribe, send an email tochirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please emailchirp_users-owner@intrepid.danplanet.com
You can ignore the first message.
If you're planning on writing scripts using apt then you should you use aptitude instead.
Try running
apt update
but if I doubt it will change anything, i.e, it appears you need to use flatpak.
And you don't have to install anything in the update.
-- Cinaed
On 6/2/22 20:12, K0LNY_Glenn wrote:
Cinead, On the first command, I got a message like warning, apt isn't stable in the cli, don't use in scripts. And on the second command, it said it couldn't find python-gtk2 Glenn ----- Original Message ----- From: "Cinaed Simson" cinaed.simson@gmail.com To: chirp_users@intrepid.danplanet.com Sent: Thursday, June 02, 2022 8:56 PM Subject: Re: [chirp_users] Using chirp with ubuntu 22.04
Type
apt list | grep python-gtk2
To installed the python-gtk2 type
apt install python-gtk2
If python-gtk2 is installed on their linux system, then anyone can build and install chirp from the source code, namely
https://trac.chirp.danplanet.com/chirp_daily/LATEST/chirp-daily-20220602.tar...
in 3 easy steps.
For qt dependencies requirements for flatpak, it depends up how you installed flatpak.
Since your system doesn't even have the command tail - which part of the core utilities - anything is possible.
How many different chirp installs are there on the system?
-- Cinaed
On 6/2/22 15:35, K0LNY_Glenn wrote:
Is QT in Ubuntu 18X by default? I have never installed that in Ubuntu, but Chirp always worked until I couldn't get it from the repository. ----- Original Message ----- From: "Nigel A. Gunn G8IFF/W8IFF" nigel@ngunn.net To: "Discussion of CHIRP" chirp_users@intrepid.danplanet.com; "D.J.J. Ring, Jr." n1ea@arrl.net Sent: Thursday, June 02, 2022 5:19 PM Subject: Re: [chirp_users] Using chirp with ubuntu 22.04
I know nothing about accessibility. Others have reported that other softwares in flatpak format are accessible so I suggest you build it from source. You will still need QT and python2.
On 02/06/2022 18:00 D.J.J. Ring, Jr. n1ea@arrl.net wrote:
Nigel,
Is CHIRP from the repository accessible?
CHIRP installed with Flatpak is inaccessible because Flatpak is inaccessible.
Certainly for blind users, an old version of CHIRP is much better than the inaccessible flatpak version.
However there is a source tarball here:
https://trac.chirp.danplanet.com/chirp_daily/LATEST/chirp-daily-20220602.tar...
I'll help any blind person install the CHIRP source tar ball.
Nigel, that should be accessible, right?
73
DR N1EA
On Wed, May 25, 2022, 8:40 AM Nigel A. Gunn G8IFF/W8IFF nigel@ngunn.net wrote:
Don't install Chirp from the repositories. It's too old.
Go to https://trac.chirp.danplanet.com/chirp_daily/LATEST/ and download and install the flatpak version. You might have to first "sudo apt install flatpak" if you don't already have it.
On 25/05/2022 02:16 Guy Schlosser guyster@bex.net wrote:
Hey everyone, I am new to this list, so first off hello. I am trying
to get chirp running on my system. I am running Ubuntu 22.04, with all packages current. Chirp is installed via apt, as using snap or flat pack renders it inaccessible with Orca.
The problem, when I download from my Baofeng Uv5r, I get an error
that says module ‘collections’ has no attribute callable. Is anyone running Chirp successfully on Ubuntu 22.04? I know that Python 2 is no longer supported. Any help would be greatly appreciated.
Thanks much in advance,
Guy JAWS Certified, 2021,
https://www.freedomscientific.com/Training/Certification
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email
chirp_users-owner@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to cinaed smson at cinaed.simson@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to cinaed smson at cinaed.simson@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
I have an older Step-by-Step guide forgetting Chirp installed on Centos6 which might give you some reminders of what you're going to need to get installed on Ubuntu 20.04 (if at all possible):
https://www.trinityos.com/HAM/CentosDigitalModes/hampacketizing-centos.html#...
--David KI6ZHD
On 06/02/2022 03:19 PM, Nigel A. Gunn G8IFF/W8IFF wrote:
I know nothing about accessibility. Others have reported that other softwares in flatpak format are accessible so I suggest you build it from source. You will still need QT and python2.
On 02/06/2022 18:00 D.J.J. Ring, Jr. n1ea@arrl.net wrote:
Nigel,
Is CHIRP from the repository accessible?
CHIRP installed with Flatpak is inaccessible because Flatpak is inaccessible.
Certainly for blind users, an old version of CHIRP is much better than the inaccessible flatpak version.
However there is a source tarball here:
https://trac.chirp.danplanet.com/chirp_daily/LATEST/chirp-daily-20220602.tar...
I'll help any blind person install the CHIRP source tar ball.
Nigel, that should be accessible, right?
73
DR N1EA
On Wed, May 25, 2022, 8:40 AM Nigel A. Gunn G8IFF/W8IFF nigel@ngunn.net wrote:
Don't install Chirp from the repositories. It's too old.
Go to https://trac.chirp.danplanet.com/chirp_daily/LATEST/ and download and install the flatpak version. You might have to first "sudo apt install flatpak" if you don't already have it.
On 25/05/2022 02:16 Guy Schlosser guyster@bex.net wrote:
Hey everyone, I am new to this list, so first off hello. I am trying to get chirp running on my system. I am running Ubuntu 22.04, with all packages current. Chirp is installed via apt, as using snap or flat pack renders it inaccessible with Orca.
The problem, when I download from my Baofeng Uv5r, I get an error that says module ‘collections’ has no attribute callable. Is anyone running Chirp successfully on Ubuntu 22.04? I know that Python 2 is no longer supported. Any help would be greatly appreciated.
Thanks much in advance,
Guy JAWS Certified, 2021, https://www.freedomscientific.com/Training/Certification _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to David Ranch at chirp@trinnet.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Nigel,
This was posted to this list:
The short version is, the at-spi bus is not available in the flatpak sandbox. I know there was an issue raised back in 2016, to try and get this resolved. The web url for this github issue is, https://github.com/flatpak/flatpak/issues/79. I really hope we can get something resolved with this technology, because I know more and more programs are using it, besides Chirp.
So until the at-spi bus is available in the flatpak sandbox it will not be accessible.
Is there a date on when CHIRP will be written in the latest version of a python so that it can again be available in the repositories and NOT conflict with the distributions newer python?
Best wishes, David
On Thu, Jun 2, 2022 at 6:19 PM Nigel A. Gunn G8IFF/W8IFF nigel@ngunn.net wrote:
I know nothing about accessibility. Others have reported that other softwares in flatpak format are accessible so I suggest you build it from source. You will still need QT and python2.
On 02/06/2022 18:00 D.J.J. Ring, Jr. n1ea@arrl.net wrote:
Nigel,
Is CHIRP from the repository accessible?
CHIRP installed with Flatpak is inaccessible because Flatpak is inaccessible.
Certainly for blind users, an old version of CHIRP is much better than the inaccessible flatpak version.
However there is a source tarball here:
https://trac.chirp.danplanet.com/chirp_daily/LATEST/chirp-daily-20220602.tar...
I'll help any blind person install the CHIRP source tar ball.
Nigel, that should be accessible, right?
73
DR N1EA
On Wed, May 25, 2022, 8:40 AM Nigel A. Gunn G8IFF/W8IFF nigel@ngunn.net wrote:
Don't install Chirp from the repositories. It's too old.
Go to https://trac.chirp.danplanet.com/chirp_daily/LATEST/ and download and install the flatpak version. You might have to first "sudo apt install flatpak" if you don't already have it.
On 25/05/2022 02:16 Guy Schlosser guyster@bex.net wrote:
Hey everyone, I am new to this list, so first off hello. I am trying to get chirp running on my system. I am running Ubuntu 22.04, with all packages current. Chirp is installed via apt, as using snap or flat pack renders it inaccessible with Orca.
The problem, when I download from my Baofeng Uv5r, I get an error that says module ‘collections’ has no attribute callable. Is anyone running Chirp successfully on Ubuntu 22.04? I know that Python 2 is no longer supported. Any help would be greatly appreciated.
Thanks much in advance,
Guy JAWS Certified, 2021, https://www.freedomscientific.com/Training/Certification _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net
Use the flatpak: https://trac.chirp.danplanet.com/chirp_daily/LATEST/chirp-daily-20220515.fla...
Joe Pizzi KI5LST
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of Guy Schlosser Sent: Wednesday, May 25, 2022 1:17 AM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Using chirp with ubuntu 22.04
Hey everyone, I am new to this list, so first off hello. I am trying to get chirp running on my system. I am running Ubuntu 22.04, with all packages current. Chirp is installed via apt, as using snap or flat pack renders it inaccessible with Orca.
The problem, when I download from my Baofeng Uv5r, I get an error that says module ‘collections’ has no attribute callable. Is anyone running Chirp successfully on Ubuntu 22.04? I know that Python 2 is no longer supported. Any help would be greatly appreciated.
Thanks much in advance,
Guy JAWS Certified, 2021, https://www.freedomscientific.com/Training/Certification _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joe Pizzi at pizzi.joe@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Joe, have you gotten chirp to work with orca using the flatpack?
I tried to install it that way, and no part of the window was accessible. It does read, if I install it using apt. I am totally blind, so I definitely need it to work with the orca screen reader. JAWS Certified, 2021, https://www.freedomscientific.com/Training/Certification
On May 25, 2022, at 8:46 AM, Joe Pizzi pizzi.joe@gmail.com wrote:
Use the flatpak: https://trac.chirp.danplanet.com/chirp_daily/LATEST/chirp-daily-20220515.fla...
Joe Pizzi KI5LST
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of Guy Schlosser Sent: Wednesday, May 25, 2022 1:17 AM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Using chirp with ubuntu 22.04
Hey everyone, I am new to this list, so first off hello. I am trying to get chirp running on my system. I am running Ubuntu 22.04, with all packages current. Chirp is installed via apt, as using snap or flat pack renders it inaccessible with Orca.
The problem, when I download from my Baofeng Uv5r, I get an error that says module ‘collections’ has no attribute callable. Is anyone running Chirp successfully on Ubuntu 22.04? I know that Python 2 is no longer supported. Any help would be greatly appreciated.
Thanks much in advance,
Guy JAWS Certified, 2021, https://www.freedomscientific.com/Training/Certification _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joe Pizzi at pizzi.joe@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Guy Schlosser at guyster@bex.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
I am happy to report that I have made progress. I got Chirp running with python 3 support by cloning this git repository: https://github.com/mpoletiek/py3-CHIRP
I am able to navigate the menu bar, and download an image from my radio. My next question is, how do I make Orca announce what is in the memory? It will say memories page tab, but then is silent, no matter what I press. Any help would be greatly appreciated.
Thanks,
Guy
On 5/25/22 09:29, Guy Schlosser wrote:
Joe, have you gotten chirp to work with orca using the flatpack?
I tried to install it that way, and no part of the window was accessible. It does read, if I install it using apt. I am totally blind, so I definitely need it to work with the orca screen reader. JAWS Certified, 2021, https://www.freedomscientific.com/Training/Certification
On May 25, 2022, at 8:46 AM, Joe Pizzi pizzi.joe@gmail.com wrote:
Use the flatpak: https://trac.chirp.danplanet.com/chirp_daily/LATEST/chirp-daily-20220515.fla...
Joe Pizzi KI5LST
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of Guy Schlosser Sent: Wednesday, May 25, 2022 1:17 AM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Using chirp with ubuntu 22.04
Hey everyone, I am new to this list, so first off hello. I am trying to get chirp running on my system. I am running Ubuntu 22.04, with all packages current. Chirp is installed via apt, as using snap or flat pack renders it inaccessible with Orca.
The problem, when I download from my Baofeng Uv5r, I get an error that says module ‘collections’ has no attribute callable. Is anyone running Chirp successfully on Ubuntu 22.04? I know that Python 2 is no longer supported. Any help would be greatly appreciated.
Thanks much in advance,
Guy JAWS Certified, 2021, https://www.freedomscientific.com/Training/Certification _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joe Pizzi at pizzi.joe@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Guy Schlosser at guyster@bex.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
.
Hi Guy, I typically tab once and you will be off the memories tab and you can arrow around like any spread sheet. Note, editing with Orca, I haven't found easy, so I export it to a CSV file and fix it up in Libra Calc and then import the new file, and then upload to the radio. HTH. Glenn ----- Original Message ----- From: "Guy Schlosser" guyster@bex.net To: "Discussion of CHIRP" chirp_users@intrepid.danplanet.com Sent: Wednesday, May 25, 2022 9:02 PM Subject: Re: [chirp_users] Using chirp with ubuntu 22.04
I am happy to report that I have made progress. I got Chirp running with python 3 support by cloning this git repository: https://github.com/mpoletiek/py3-CHIRP
I am able to navigate the menu bar, and download an image from my radio. My next question is, how do I make Orca announce what is in the memory? It will say memories page tab, but then is silent, no matter what I press. Any help would be greatly appreciated.
Thanks,
Guy
On 5/25/22 09:29, Guy Schlosser wrote:
Joe, have you gotten chirp to work with orca using the flatpack?
I tried to install it that way, and no part of the window was accessible. It does read, if I install it using apt. I am totally blind, so I definitely need it to work with the orca screen reader. JAWS Certified, 2021, https://www.freedomscientific.com/Training/Certification
On May 25, 2022, at 8:46 AM, Joe Pizzi pizzi.joe@gmail.com wrote:
Use the flatpak: https://trac.chirp.danplanet.com/chirp_daily/LATEST/chirp-daily-20220515.fla...
Joe Pizzi KI5LST
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of Guy Schlosser Sent: Wednesday, May 25, 2022 1:17 AM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Using chirp with ubuntu 22.04
Hey everyone, I am new to this list, so first off hello. I am trying to get chirp running on my system. I am running Ubuntu 22.04, with all packages current. Chirp is installed via apt, as using snap or flat pack renders it inaccessible with Orca.
The problem, when I download from my Baofeng Uv5r, I get an error that says module ‘collections’ has no attribute callable. Is anyone running Chirp successfully on Ubuntu 22.04? I know that Python 2 is no longer supported. Any help would be greatly appreciated.
Thanks much in advance,
Guy JAWS Certified, 2021, https://www.freedomscientific.com/Training/Certification _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joe Pizzi at pizzi.joe@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Guy Schlosser at guyster@bex.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
.
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Glenn, that's a good idea about exporting to csv and editing in libre calc. Unfortunately though, when I pressed tab once, I heard silence. I think Jim could be onto something with a setting being out of range. I did send my baofeng .img file so he can examine it. Thanks much for your help.
Guy Ke8JYP On 5/25/2022 10:31 PM, K0LNY_Glenn wrote:
Hi Guy, I typically tab once and you will be off the memories tab and you can arrow around like any spread sheet. Note, editing with Orca, I haven't found easy, so I export it to a CSV file and fix it up in Libra Calc and then import the new file, and then upload to the radio. HTH. Glenn ----- Original Message ----- From: "Guy Schlosser"guyster@bex.net To: "Discussion of CHIRP"chirp_users@intrepid.danplanet.com Sent: Wednesday, May 25, 2022 9:02 PM Subject: Re: [chirp_users] Using chirp with ubuntu 22.04
I am happy to report that I have made progress. I got Chirp running with python 3 support by cloning this git repository: https://github.com/mpoletiek/py3-CHIRP
I am able to navigate the menu bar, and download an image from my radio. My next question is, how do I make Orca announce what is in the memory? It will say memories page tab, but then is silent, no matter what I press. Any help would be greatly appreciated.
Thanks,
Guy
On 5/25/22 09:29, Guy Schlosser wrote:
Joe, have you gotten chirp to work with orca using the flatpack?
I tried to install it that way, and no part of the window was accessible. It does read, if I install it using apt. I am totally blind, so I definitely need it to work with the orca screen reader. JAWS Certified, 2021,https://www.freedomscientific.com/Training/Certification
On May 25, 2022, at 8:46 AM, Joe Pizzipizzi.joe@gmail.com wrote:
Use the flatpak: https://trac.chirp.danplanet.com/chirp_daily/LATEST/chirp-daily-20220515.fla...
Joe Pizzi KI5LST
-----Original Message----- From:chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of Guy Schlosser Sent: Wednesday, May 25, 2022 1:17 AM To:chirp_users@intrepid.danplanet.com Subject: [chirp_users] Using chirp with ubuntu 22.04
Hey everyone, I am new to this list, so first off hello. I am trying to get chirp running on my system. I am running Ubuntu 22.04, with all packages current. Chirp is installed via apt, as using snap or flat pack renders it inaccessible with Orca.
The problem, when I download from my Baofeng Uv5r, I get an error that says module ‘collections’ has no attribute callable. Is anyone running Chirp successfully on Ubuntu 22.04? I know that Python 2 is no longer supported. Any help would be greatly appreciated.
Thanks much in advance,
Guy JAWS Certified, 2021, https://www.freedomscientific.com/Training/Certification _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joe Pizzi atpizzi.joe@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Guy Schlosser atguyster@bex.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY atglenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Guy Schlosser atguyster@bex.net To unsubscribe, send an email tochirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please emailchirp_users-owner@intrepid.danplanet.com
As promised, I booted up my mac air that has Ubuntu-mate 21.10, the version before the current release (22.04). I have the same trouble. Chirp on this machine is installed via apt (sudo apt-get install chirp). If I run Chirp either by command line, or through Mate's accessories menu, I can access the menu bar, the file open dialogue, and the download dialogue, but no access to the memories tab, or settings tab once I've opened an image from my Baofeng UV5R. When I open the image, Orca says memories tab, but tab key and arrow keys yield silence. I'm not sure what, but something is definitely broken in the Python 3 version of Chirp accessibility wise. Should we file a bug report against Chirp, or Orca? Thanks for any input anyone has on this matter.
Guy
On 5/26/22 11:26, guy schlosser wrote:
Glenn, that's a good idea about exporting to csv and editing in libre calc. Unfortunately though, when I pressed tab once, I heard silence. I think Jim could be onto something with a setting being out of range. I did send my baofeng .img file so he can examine it. Thanks much for your help.
Guy Ke8JYP On 5/25/2022 10:31 PM, K0LNY_Glenn wrote:
Hi Guy, I typically tab once and you will be off the memories tab and you can arrow around like any spread sheet. Note, editing with Orca, I haven't found easy, so I export it to a CSV file and fix it up in Libra Calc and then import the new file, and then upload to the radio. HTH. Glenn ----- Original Message ----- From: "Guy Schlosser"guyster@bex.net To: "Discussion of CHIRP"chirp_users@intrepid.danplanet.com Sent: Wednesday, May 25, 2022 9:02 PM Subject: Re: [chirp_users] Using chirp with ubuntu 22.04
I am happy to report that I have made progress. I got Chirp running with python 3 support by cloning this git repository: https://github.com/mpoletiek/py3-CHIRP
I am able to navigate the menu bar, and download an image from my radio. My next question is, how do I make Orca announce what is in the memory? It will say memories page tab, but then is silent, no matter what I press. Any help would be greatly appreciated.
Thanks,
Guy
On 5/25/22 09:29, Guy Schlosser wrote:
Joe, have you gotten chirp to work with orca using the flatpack?
I tried to install it that way, and no part of the window was accessible. It does read, if I install it using apt. I am totally blind, so I definitely need it to work with the orca screen reader. JAWS Certified, 2021,https://www.freedomscientific.com/Training/Certification
On May 25, 2022, at 8:46 AM, Joe Pizzipizzi.joe@gmail.com wrote:
Use the flatpak: https://trac.chirp.danplanet.com/chirp_daily/LATEST/chirp-daily-20220515.fla...
Joe Pizzi KI5LST
-----Original Message----- From:chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of Guy Schlosser Sent: Wednesday, May 25, 2022 1:17 AM To:chirp_users@intrepid.danplanet.com Subject: [chirp_users] Using chirp with ubuntu 22.04
Hey everyone, I am new to this list, so first off hello. I am trying to get chirp running on my system. I am running Ubuntu 22.04, with all packages current. Chirp is installed via apt, as using snap or flat pack renders it inaccessible with Orca.
The problem, when I download from my Baofeng Uv5r, I get an error that says module ‘collections’ has no attribute callable. Is anyone running Chirp successfully on Ubuntu 22.04? I know that Python 2 is no longer supported. Any help would be greatly appreciated.
Thanks much in advance,
Guy JAWS Certified, 2021, https://www.freedomscientific.com/Training/Certification _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joe Pizzi atpizzi.joe@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Guy Schlosser atguyster@bex.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY atglenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Guy Schlosser atguyster@bex.net To unsubscribe, send an email tochirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please emailchirp_users-owner@intrepid.danplanet.com
-- test
AVG logo https://www.avg.com/internet-security
This email has been checked for viruses by AVG antivirus software. www.avg.com https://www.avg.com/internet-security
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Guy Schlosser atguyster@bex.net To unsubscribe, send an email tochirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please emailchirp_users-owner@intrepid.danplanet.com
Most likely your radio has one or more settings that are invalid/out-of-range which often causes the the settings tab to not up. If you can send me your CHIRP Radio Images (*.img) file (many email service providers block them) I can find them and set to valid values for you.
Jim KC9HI
On Wed, May 25, 2022 at 10:04 PM Guy Schlosser guyster@bex.net wrote:
I am happy to report that I have made progress. I got Chirp running with python 3 support by cloning this git repository: https://github.com/mpoletiek/py3-CHIRP
I am able to navigate the menu bar, and download an image from my radio. My next question is, how do I make Orca announce what is in the memory? It will say memories page tab, but then is silent, no matter what I press. Any help would be greatly appreciated.
Thanks,
Guy
On 5/25/22 09:29, Guy Schlosser wrote:
Joe, have you gotten chirp to work with orca using the flatpack?
I tried to install it that way, and no part of the window was
accessible. It does read, if I install it using apt. I am totally blind, so I definitely need it to work with the orca screen reader. JAWS Certified, 2021, https://www.freedomscientific.com/Training/Certification
On May 25, 2022, at 8:46 AM, Joe Pizzi pizzi.joe@gmail.com wrote:
Use the flatpak:
https://trac.chirp.danplanet.com/chirp_daily/LATEST/chirp-daily-20220515.fla...
Joe Pizzi KI5LST
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com <
chirp_users-bounces@intrepid.danplanet.com> On Behalf Of Guy Schlosser
Sent: Wednesday, May 25, 2022 1:17 AM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Using chirp with ubuntu 22.04
Hey everyone, I am new to this list, so first off hello. I am trying to
get chirp running on my system. I am running Ubuntu 22.04, with all packages current. Chirp is installed via apt, as using snap or flat pack renders it inaccessible with Orca.
The problem, when I download from my Baofeng Uv5r, I get an error that
says module ‘collections’ has no attribute callable. Is anyone running Chirp successfully on Ubuntu 22.04? I know that Python 2 is no longer supported. Any help would be greatly appreciated.
Thanks much in advance,
Guy JAWS Certified, 2021,
https://www.freedomscientific.com/Training/Certification
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joe Pizzi at pizzi.joe@gmail.com To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email
chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Guy Schlosser at guyster@bex.net To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email
chirp_users-owner@intrepid.danplanet.com
.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jim at rock.unroe@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
participants (9)
-
Cinaed Simson -
D.J.J. Ring, Jr. -
David Ranch -
Guy Schlosser -
guy schlosser
-
Jim Unroe -
Joe Pizzi -
K0LNY_Glenn -
Nigel A. Gunn G8IFF/W8IFF