Your post doesn't say a word of CHIRP not working. You asked about squelch.

Jardy Dawson WA7JRD Nobody really cares what device you are using, as long as YOU like it!

On Jul 19, 2015, at 10:15, Larry lnation2@suddenlink.net wrote:

I am not having radio problems and can’t get Chirp to come up. Read the damned post.

From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jardy Dawson Sent: Sunday, July 19, 2015 11:56 AM To: Discussion of CHIRP Subject: Re: [chirp_users] Baofeng UV-5R and settings/squelch_levels

You could always try it first to find out. Squelch is adjustable by menu.

Jardy Dawson WA7JRD Ham Radio

Sent by hurling dead pigeons over the wall by trebuchet.

From: Pavel Milanes Costa co7wt@frcuba.co.cu To: chirp_users@intrepid.danplanet.com Sent: Sunday, July 19, 2015 8:20 AM Subject: [chirp_users] Baofeng UV-5R and settings/squelch_levels

Hi, I'm new to the list...

I was searching the list archives for this, but found no answer, so here it goes...

The squelch levels for VHF/UHF on the settings > service settings options do work for the Baofeng UV-5R?

My Baofeng is about 10uV in VHF and ~2.0uV on UHF, so VHF reception is hard, may be it has to do with the SQ level, it has 25 as SQL 0 for VHF and 19 on SQL 0 for UHF.

So before I play with that values I want to know if this setting will really work with my radio.

I'm using chirp-daily-20150702 here...

73,

-- M.Sc. Pavel Milanes Costa, CO7WT SYSOP Nodo Gateway CO9JAZ Ciudad de Camagüey, Camagüey, Cuba. Cell: (+53) 53-847819

Este email fue enviado usando packet radio a 9600 baudios This email was sent using Amateur Packet Radio at 9600 baud

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

If you would have read what I responded to, you would find out you are totally mixed up in what you are talking about.  Read under my response to see the real email I answered.  I would like to see things from your point of view, but you would have to get your head out of the way so I could get mine up there. Jardy Dawson WA7JRD Ham Radio

Sent by hurling dead pigeons over the wall by trebuchet.

From: Larry lnation2@suddenlink.net To: 'Discussion of CHIRP' chirp_users@intrepid.danplanet.com Sent: Sunday, July 19, 2015 11:08 AM Subject: Re: [chirp_users] Baofeng UV-5R and settings/squelch_levels

#yiv2208031184 #yiv2208031184 -- _filtered #yiv2208031184 {font-family:Helvetica;panose-1:2 11 6 4 2 2 2 2 2 4;} _filtered #yiv2208031184 {panose-1:2 4 5 3 5 4 6 3 2 4;} _filtered #yiv2208031184 {font-family:Calibri;panose-1:2 15 5 2 2 2 4 3 2 4;} _filtered #yiv2208031184 {font-family:Tahoma;panose-1:2 11 6 4 3 5 4 4 2 4;} _filtered #yiv2208031184 {panose-1:3 15 7 2 3 3 2 2 2 4;}#yiv2208031184 #yiv2208031184 p.yiv2208031184MsoNormal, #yiv2208031184 li.yiv2208031184MsoNormal, #yiv2208031184 div.yiv2208031184MsoNormal {margin:0in;margin-bottom:.0001pt;font-size:12.0pt;}#yiv2208031184 a:link, #yiv2208031184 span.yiv2208031184MsoHyperlink {color:blue;text-decoration:underline;}#yiv2208031184 a:visited, #yiv2208031184 span.yiv2208031184MsoHyperlinkFollowed {color:purple;text-decoration:underline;}#yiv2208031184 p.yiv2208031184MsoAcetate, #yiv2208031184 li.yiv2208031184MsoAcetate, #yiv2208031184 div.yiv2208031184MsoAcetate {margin:0in;margin-bottom:.0001pt;font-size:8.0pt;}#yiv2208031184 span.yiv2208031184BalloonTextChar {}#yiv2208031184 span.yiv2208031184EmailStyle19 {color:windowtext;}#yiv2208031184 span.yiv2208031184EmailStyle20 {color:windowtext;}#yiv2208031184 .yiv2208031184MsoChpDefault {font-size:10.0pt;} _filtered #yiv2208031184 {margin:1.0in 1.0in 1.0in 1.0in;}#yiv2208031184 div.yiv2208031184WordSection1 {}#yiv2208031184 What I posted last nite did.

From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jardy Sent: Sunday, July 19, 2015 12:18 PM To: Discussion of CHIRP Subject: Re: [chirp_users] Baofeng UV-5R and settings/squelch_levels  Your post doesn't say a word of CHIRP not working. You asked about squelch.

Jardy Dawson WA7JRDNobody really cares what device you are using, as long as YOU like it! On Jul 19, 2015, at 10:15, Larry lnation2@suddenlink.net wrote: I am not having radio problems and can’t get Chirp to come up.  Read the damned post. From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jardy Dawson Sent: Sunday, July 19, 2015 11:56 AM To: Discussion of CHIRP Subject: Re: [chirp_users] Baofeng UV-5R and settings/squelch_levels You could always try it first to find out.  Squelch is adjustable by menu. Jardy Dawson WA7JRD Ham Radio

Sent by hurling dead pigeons over the wall by trebuchet.

From: Pavel Milanes Costa co7wt@frcuba.co.cu To: chirp_users@intrepid.danplanet.com Sent: Sunday, July 19, 2015 8:20 AM Subject: [chirp_users] Baofeng UV-5R and settings/squelch_levels Hi, I'm new to the list...

I was searching the list archives for this, but found no answer, so here it goes...

The squelch levels for VHF/UHF on the settings > service settings options do work for the Baofeng UV-5R?

My Baofeng is about 10uV in VHF and ~2.0uV on UHF, so VHF reception is hard, may be it has to do with the SQ level, it has 25 as SQL 0 for VHF and 19 on SQL 0 for UHF.

So before I play with that values I want to know if this setting will really work with my radio.

I'm using chirp-daily-20150702 here...

73,

Thank you. Jardy Dawson WA7JRD Ham Radio

Sent by hurling dead pigeons over the wall by trebuchet.

From: Larry lnation2@suddenlink.net To: 'Jardy Dawson' jardy72@yahoo.com; 'Discussion of CHIRP' chirp_users@intrepid.danplanet.com Sent: Sunday, July 19, 2015 11:15 AM Subject: Re: [chirp_users] Baofeng UV-5R and settings/squelch_levels

#yiv9468048733 #yiv9468048733 -- _filtered #yiv9468048733 {font-family:Helvetica;panose-1:2 11 6 4 2 2 2 2 2 4;} _filtered #yiv9468048733 {panose-1:2 4 5 3 5 4 6 3 2 4;} _filtered #yiv9468048733 {font-family:Calibri;panose-1:2 15 5 2 2 2 4 3 2 4;} _filtered #yiv9468048733 {font-family:Tahoma;panose-1:2 11 6 4 3 5 4 4 2 4;} _filtered #yiv9468048733 {panose-1:3 15 7 2 3 3 2 2 2 4;}#yiv9468048733 #yiv9468048733 p.yiv9468048733MsoNormal, #yiv9468048733 li.yiv9468048733MsoNormal, #yiv9468048733 div.yiv9468048733MsoNormal {margin:0in;margin-bottom:.0001pt;font-size:12.0pt;}#yiv9468048733 a:link, #yiv9468048733 span.yiv9468048733MsoHyperlink {color:blue;text-decoration:underline;}#yiv9468048733 a:visited, #yiv9468048733 span.yiv9468048733MsoHyperlinkFollowed {color:purple;text-decoration:underline;}#yiv9468048733 p.yiv9468048733MsoAcetate, #yiv9468048733 li.yiv9468048733MsoAcetate, #yiv9468048733 div.yiv9468048733MsoAcetate {margin:0in;margin-bottom:.0001pt;font-size:8.0pt;}#yiv9468048733 p.yiv9468048733msoacetate, #yiv9468048733 li.yiv9468048733msoacetate, #yiv9468048733 div.yiv9468048733msoacetate {margin-right:0in;margin-left:0in;font-size:12.0pt;}#yiv9468048733 p.yiv9468048733msonormal, #yiv9468048733 li.yiv9468048733msonormal, #yiv9468048733 div.yiv9468048733msonormal {margin-right:0in;margin-left:0in;font-size:12.0pt;}#yiv9468048733 p.yiv9468048733msochpdefault, #yiv9468048733 li.yiv9468048733msochpdefault, #yiv9468048733 div.yiv9468048733msochpdefault {margin-right:0in;margin-left:0in;font-size:12.0pt;}#yiv9468048733 span.yiv9468048733msohyperlink {}#yiv9468048733 span.yiv9468048733msohyperlinkfollowed {}#yiv9468048733 span.yiv9468048733emailstyle19 {}#yiv9468048733 span.yiv9468048733emailstyle20 {}#yiv9468048733 p.yiv9468048733msonormal1, #yiv9468048733 li.yiv9468048733msonormal1, #yiv9468048733 div.yiv9468048733msonormal1 {margin:0in;margin-bottom:.0001pt;font-size:12.0pt;}#yiv9468048733 span.yiv9468048733msohyperlink1 {color:blue;text-decoration:underline;}#yiv9468048733 span.yiv9468048733msohyperlinkfollowed1 {color:purple;text-decoration:underline;}#yiv9468048733 p.yiv9468048733msoacetate1, #yiv9468048733 li.yiv9468048733msoacetate1, #yiv9468048733 div.yiv9468048733msoacetate1 {margin:0in;margin-bottom:.0001pt;font-size:8.0pt;}#yiv9468048733 span.yiv9468048733emailstyle191 {color:windowtext;}#yiv9468048733 span.yiv9468048733emailstyle201 {color:windowtext;}#yiv9468048733 p.yiv9468048733msochpdefault1, #yiv9468048733 li.yiv9468048733msochpdefault1, #yiv9468048733 div.yiv9468048733msochpdefault1 {margin-right:0in;margin-left:0in;font-size:10.0pt;}#yiv9468048733 span.yiv9468048733EmailStyle31 {color:windowtext;}#yiv9468048733 span.yiv9468048733BalloonTextChar {}#yiv9468048733 .yiv9468048733MsoChpDefault {font-size:10.0pt;} _filtered #yiv9468048733 {margin:1.0in 1.0in 1.0in 1.0in;}#yiv9468048733 div.yiv9468048733WordSection1 {}#yiv9468048733 Yes I am sorry

From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jardy Dawson Sent: Sunday, July 19, 2015 1:13 PM To: Discussion of CHIRP Subject: Re: [chirp_users] Baofeng UV-5R and settings/squelch_levels  If you would have read what I responded to, you would find out you are totally mixed up in what you are talking about.  Read under my response to see the real email I answered.  I would like to see things from your point of view, but you would have to get your head out of the way so I could get mine up there. Jardy Dawson WA7JRD Ham Radio

Sent by hurling dead pigeons over the wall by trebuchet.

From: Larry lnation2@suddenlink.net To: 'Discussion of CHIRP' chirp_users@intrepid.danplanet.com Sent: Sunday, July 19, 2015 11:08 AM Subject: Re: [chirp_users] Baofeng UV-5R and settings/squelch_levels  What I posted last nite did.    From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jardy Sent: Sunday, July 19, 2015 12:18 PM To: Discussion of CHIRP Subject: Re: [chirp_users] Baofeng UV-5R and settings/squelch_levels Your post doesn't say a word of CHIRP not working. You asked about squelch.

Jardy Dawson WA7JRDNobody really cares what device you are using, as long as YOU like it! On Jul 19, 2015, at 10:15, Larry lnation2@suddenlink.net wrote: I am not having radio problems and can’t get Chirp to come up.  Read the damned post. From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jardy Dawson Sent: Sunday, July 19, 2015 11:56 AM To: Discussion of CHIRP Subject: Re: [chirp_users] Baofeng UV-5R and settings/squelch_levels You could always try it first to find out.  Squelch is adjustable by menu. Jardy Dawson WA7JRD Ham Radio

Sent by hurling dead pigeons over the wall by trebuchet.

From: Pavel Milanes Costa co7wt@frcuba.co.cu To: chirp_users@intrepid.danplanet.com Sent: Sunday, July 19, 2015 8:20 AM Subject: [chirp_users] Baofeng UV-5R and settings/squelch_levels Hi, I'm new to the list...

I was searching the list archives for this, but found no answer, so here it goes...

The squelch levels for VHF/UHF on the settings > service settings options do work for the Baofeng UV-5R?

My Baofeng is about 10uV in VHF and ~2.0uV on UHF, so VHF reception is hard, may be it has to do with the SQ level, it has 25 as SQL 0 for VHF and 19 on SQL 0 for UHF.

So before I play with that values I want to know if this setting will really work with my radio.

I'm using chirp-daily-20150702 here...

73,

Larry,

Please refrain from taking over other people's posts (Pavel started this specific thread on Squelch issues) for getting help with your issue (Windows execution issue).

--David KI6ZHD

On 07/19/2015 09:57 AM, Larry wrote:

I can't even get Chirp to come up I keep getting the error: C:\Program Files\CHIRP\chirpw.exe The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more details. I am using chirp-daily-20150702-installer and the cable driver I am using is Win_Driver_Prolific_3.2.0.0 and it works fine on Windows 7 and 10

-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Pavel Milanes Costa Sent: Sunday, July 19, 2015 10:21 AM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Baofeng UV-5R and settings/squelch_levels

Hi, I'm new to the list...

I was searching the list archives for this, but found no answer, so here it goes...

The squelch levels for VHF/UHF on the settings > service settings options do work for the Baofeng UV-5R?

My Baofeng is about 10uV in VHF and ~2.0uV on UHF, so VHF reception is hard, may be it has to do with the SQ level, it has 25 as SQL 0 for VHF and 19 on SQL 0 for UHF.

So before I play with that values I want to know if this setting will really work with my radio.

I'm using chirp-daily-20150702 here...

73,

-- M.Sc. Pavel Milanes Costa, CO7WT SYSOP Nodo Gateway CO9JAZ Ciudad de Camagüey, Camagüey, Cuba. Cell: (+53) 53-847819

Este email fue enviado usando packet radio a 9600 baudios This email was sent using Amateur Packet Radio at 9600 baud

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

El 19/07/15 a las 20:21, Jim Unroe escribió:

On Sun, Jul 19, 2015 at 11:20 AM, Pavel Milanes Costa co7wt@frcuba.co.cu wrote:

...

Hi, I'm new to the list...

I was searching the list archives for this, but found no answer, so here it goes...

The squelch levels for VHF/UHF on the settings > service settings options do work for the Baofeng UV-5R?

My Baofeng is about 10uV in VHF and ~2.0uV on UHF, so VHF reception is hard, may be it has to do with the SQ level, it has 25 as SQL 0 for VHF and 19 on SQL 0 for UHF.

So before I play with that values I want to know if this setting will really work with my radio.

I'm using chirp-daily-20150702 here...

73,

-- M.Sc. Pavel Milanes Costa, CO7WT SYSOP Nodo Gateway CO9JAZ Ciudad de Camagüey, Camagüey, Cuba. Cell: (+53) 53-847819

Este email fue enviado usando packet radio a 9600 baudios This email was sent using Amateur Packet Radio at 9600 baud

There is no guarantee that it will work. Feedback shows that it works for firmware version BFB291 and newer. The settings won't show up if the firmware version is older than this. The improvement seems to vary from firmware version to firmware version and model to model.

Always save your radio's channels and settings before you start making any changes. That way you can always get back to where you started. It appears that you have test equipment available. All you have to do is change one setting to see if it works. If it doesn't, then change it back.

Jim KC9HI

Thanks for the answer Tim.

My firmware is BFB297 N5R-20, so it may work... I will try and get back to the list to report..

73

Run as administrator.

Jardy Dawson WA7JRD Ham Radio

Message relayed through SETI (Search for Extra-Terrestrial Intelligence, although no terrestrial intelligence has been found yet, either)

On Jul 21, 2015, at 06:25, Mike Raymond K5HUM@ARRL.NET wrote:

Issue: Cannot get a driver to function on my w8.1 machine using same cable (with FTDI chip), Win_Driver_Prolific_3_2_0_0 and UV-3R transceiver software that all works FINE on my big 64b W7 machine incl Chirp.

Any suggestions on how to solve the W8.1 problems????

The W8.1 Dell Laptop has 3gb ram, 500gb HD and otherwise runs flawlessly.

73

...

On Sun, Jul 19, 2015 at 8:43 PM, Pavel Milanes Costa co7wt@frcuba.co.cu wrote:

El 19/07/15 a las 20:21, Jim Unroe escribió:

...

On Sun, Jul 19, 2015 at 11:20 AM, Pavel Milanes Costa co7wt@frcuba.co.cu wrote:

...

Hi, I'm new to the list...

I was searching the list archives for this, but found no answer, so here it goes...

The squelch levels for VHF/UHF on the settings > service settings options do work for the Baofeng UV-5R?

My Baofeng is about 10uV in VHF and ~2.0uV on UHF, so VHF reception is hard, may be it has to do with the SQ level, it has 25 as SQL 0 for VHF and 19 on SQL 0 for UHF.

So before I play with that values I want to know if this setting will really work with my radio.

I'm using chirp-daily-20150702 here...

73,

-- M.Sc. Pavel Milanes Costa, CO7WT SYSOP Nodo Gateway CO9JAZ Ciudad de Camagüey, Camagüey, Cuba. Cell: (+53) 53-847819

Este email fue enviado usando packet radio a 9600 baudios This email was sent using Amateur Packet Radio at 9600 baud

There is no guarantee that it will work. Feedback shows that it works for firmware version BFB291 and newer. The settings won't show up if the firmware version is older than this. The improvement seems to vary from firmware version to firmware version and model to model.

Always save your radio's channels and settings before you start making any changes. That way you can always get back to where you started. It appears that you have test equipment available. All you have to do is change one setting to see if it works. If it doesn't, then change it back.

Jim KC9HI

Thanks for the answer Tim.

My firmware is BFB297 N5R-20, so it may work... I will try and get back to the list to report..

73

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

The problem is NOT chirp. chirp runs fine on my W8.1

The problem is the USB to Serial driver. Which operates fine on my W7 machine.

The driver error message on the W8.1 machine is:

This device cannot start. (Code 10) {Not Enough Quota} Not enough virtual memory or paging file quota is available to complete the specified operation.

Thanks Mike K5HUM@ARRL.NET

On Tue, Jul 21, 2015 at 10:28 AM, John LaMartina JohnLa@usa.net wrote:

Is the problem potentially Smart Screen? Refer to *http://www.miklor.com/COM/UV_CHIRP.php http://www.miklor.com/COM/UV_CHIRP.php* (section 2)

John

http://www.miklor.com

*From:* chirp_users-bounces@intrepid.danplanet.com [mailto: chirp_users-bounces@intrepid.danplanet.com] *On Behalf Of *Mike Raymond *Sent:* Tuesday, July 21, 2015 9:25 AM *To:* Discussion of CHIRP *Subject:* Re: [chirp_users] Baofeng UV-5R and settings/squelch_levels

Issue:

Cannot get a driver to function on my w8.1 machine using

same cable (with FTDI chip), Win_Driver_Prolific_3_2_0_0

and UV-3R transceiver software that all works FINE on my

big 64b W7 machine incl Chirp.

Any suggestions on how to solve the W8.1 problems????

The W8.1 Dell Laptop has 3gb ram, 500gb HD and otherwise

runs flawlessly.

73

On Sun, Jul 19, 2015 at 8:43 PM, Pavel Milanes Costa co7wt@frcuba.co.cu wrote:

El 19/07/15 a las 20:21, Jim Unroe escribió:

...

On Sun, Jul 19, 2015 at 11:20 AM, Pavel Milanes Costa co7wt@frcuba.co.cu wrote:

...

Hi, I'm new to the list...

I was searching the list archives for this, but found no answer, so here it goes...

The squelch levels for VHF/UHF on the settings > service settings options do work for the Baofeng UV-5R?

My Baofeng is about 10uV in VHF and ~2.0uV on UHF, so VHF reception is hard, may be it has to do with the SQ level, it has 25 as SQL 0 for VHF and 19 on SQL 0 for UHF.

So before I play with that values I want to know if this setting will really work with my radio.

I'm using chirp-daily-20150702 here...

73,

-- M.Sc. Pavel Milanes Costa, CO7WT SYSOP Nodo Gateway CO9JAZ Ciudad de Camagüey, Camagüey, Cuba. Cell: (+53) 53-847819

Este email fue enviado usando packet radio a 9600 baudios This email was sent using Amateur Packet Radio at 9600 baud

There is no guarantee that it will work. Feedback shows that it works for firmware version BFB291 and newer. The settings won't show up if the firmware version is older than this. The improvement seems to vary from firmware version to firmware version and model to model.

Always save your radio's channels and settings before you start making any changes. That way you can always get back to where you started. It appears that you have test equipment available. All you have to do is change one setting to see if it works. If it doesn't, then change it back.

Jim KC9HI

Thanks for the answer Tim.

My firmware is BFB297 N5R-20, so it may work... I will try and get back to the list to report..

73

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

Would be happy to try anything. Where can I get the driver you suggest???

Mike

On Tue, Jul 21, 2015 at 12:34 PM, John LaMartina JohnLa@usa.net wrote:

You mention that you are using a cable with an FTDI chip and the Prolific 3.2.0.0 driver. It may be a driver mismatch.

The FTDI chip requires the FTDI driver. The Prolific 3.2.0.0 driver is for the Prolific chip only.

Could this be the issue?

John

http://www.miklor.com

*From:* chirp_users-bounces@intrepid.danplanet.com [mailto: chirp_users-bounces@intrepid.danplanet.com] *On Behalf Of *Mike Raymond *Sent:* Tuesday, July 21, 2015 9:25 AM *To:* Discussion of CHIRP *Subject:* Re: [chirp_users] Baofeng UV-5R and settings/squelch_levels

Issue:

Cannot get a driver to function on my w8.1 machine using

same cable (with FTDI chip), Win_Driver_Prolific_3_2_0_0

and UV-3R transceiver software that all works FINE on my

big 64b W7 machine incl Chirp.

Any suggestions on how to solve the W8.1 problems????

The W8.1 Dell Laptop has 3gb ram, 500gb HD and otherwise

runs flawlessly.

73

On Sun, Jul 19, 2015 at 8:43 PM, Pavel Milanes Costa co7wt@frcuba.co.cu wrote:

El 19/07/15 a las 20:21, Jim Unroe escribió:

...

On Sun, Jul 19, 2015 at 11:20 AM, Pavel Milanes Costa co7wt@frcuba.co.cu wrote:

...

Hi, I'm new to the list...

I was searching the list archives for this, but found no answer, so here it goes...

The squelch levels for VHF/UHF on the settings > service settings options do work for the Baofeng UV-5R?

My Baofeng is about 10uV in VHF and ~2.0uV on UHF, so VHF reception is hard, may be it has to do with the SQ level, it has 25 as SQL 0 for VHF and 19 on SQL 0 for UHF.

So before I play with that values I want to know if this setting will really work with my radio.

I'm using chirp-daily-20150702 here...

73,

-- M.Sc. Pavel Milanes Costa, CO7WT SYSOP Nodo Gateway CO9JAZ Ciudad de Camagüey, Camagüey, Cuba. Cell: (+53) 53-847819

Este email fue enviado usando packet radio a 9600 baudios This email was sent using Amateur Packet Radio at 9600 baud

There is no guarantee that it will work. Feedback shows that it works for firmware version BFB291 and newer. The settings won't show up if the firmware version is older than this. The improvement seems to vary from firmware version to firmware version and model to model.

Always save your radio's channels and settings before you start making any changes. That way you can always get back to where you started. It appears that you have test equipment available. All you have to do is change one setting to see if it works. If it doesn't, then change it back.

Jim KC9HI

Thanks for the answer Tim.

My firmware is BFB297 N5R-20, so it may work... I will try and get back to the list to report..

73

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com