[chirp_users] CSV file.
The answer to my question is pretty apparent, but I want to double check.
In the CSV file I'm assuming that some, most or all of the numeric columns cannot be blank or set to zero. Example:
Changing tone mode to (None) in Chirp is blank in csv. However if I change rToneFreq, cToneFreq which are now unused to 0 or blank I get an error when importing.
So when tone mode is set to none rToneFreq cToneFreq are simply ignored?
Dennis M. Wage
245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net
So when tone mode is set to none rToneFreq cToneFreq are simply ignored?
Yes. The columns that are used are determined by the Tone Mode and Cross Mode settings. Any values in fields of the unused columns are ignored. It is best to leave these fields set to their default value. If I recall, the default value for rToneFeq and cToneFreq fields is 88.5.
This web page has links to some CHIRP column guides that might help: http://www.miklor.com/COM/UV_CHIRP.php#guides
Jim KC9HI
How do you reorder numbering for location? Also how do you add new frequencies or locations?
Floyd n7ulc
On Mar 2, 2018 9:16 AM, "Jim Unroe" rock.unroe@gmail.com wrote:
So when tone mode is set to none rToneFreq cToneFreq are simply ignored?
Yes. The columns that are used are determined by the Tone Mode and Cross Mode settings. Any values in fields of the unused columns are ignored. It is best to leave these fields set to their default value. If I recall, the default value for rToneFeq and cToneFreq fields is 88.5.
This web page has links to some CHIRP column guides that might help: http://www.miklor.com/COM/UV_CHIRP.php#guides
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Floyd at 1n7ulc@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
Floyd,
It sounds to me like you haven't messed around with the Chirp software enough. Click and right click everywhere. You can't break anything. Chirp is set up similar to a spread sheet program like Excel, only with preset values for the columns and rows.
In Chirp, you can highlight a location by clicking, then right clicking to copy. Then you can right click a another location and you have pasting options.
If you are doing a lot of editing it's better to export to a CSV file. But you need to know how to work spreadsheets a little.
I have my radio almost figured out. Having a few problems understanding the Squelch Tail settings for repeaters, but I'll get it.
Dennis M. Wage
245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net
On Fri, Mar 2, 2018 at 9:35 AM, Floyd Epperson 1n7ulc@gmail.com wrote:
How do you reorder numbering for location? Also how do you add new frequencies or locations?
Floyd n7ulc
On Mar 2, 2018 9:16 AM, "Jim Unroe" rock.unroe@gmail.com wrote:
So when tone mode is set to none rToneFreq cToneFreq are simply ignored?
Yes. The columns that are used are determined by the Tone Mode and Cross Mode settings. Any values in fields of the unused columns are ignored. It is best to leave these fields set to their default value. If I recall, the default value for rToneFeq and cToneFreq fields is 88.5.
This web page has links to some CHIRP column guides that might help: http://www.miklor.com/COM/UV_CHIRP.php#guides
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Floyd at 1n7ulc@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrep id.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dennis Wage at dwage@dwage.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
Thanks Appreciate the help.
On Fri, Mar 2, 2018 at 9:45 AM, Dennis Wage dwage@dwage.com wrote:
Floyd,
It sounds to me like you haven't messed around with the Chirp software enough. Click and right click everywhere. You can't break anything. Chirp is set up similar to a spread sheet program like Excel, only with preset values for the columns and rows.
In Chirp, you can highlight a location by clicking, then right clicking to copy. Then you can right click a another location and you have pasting options.
If you are doing a lot of editing it's better to export to a CSV file. But you need to know how to work spreadsheets a little.
I have my radio almost figured out. Having a few problems understanding the Squelch Tail settings for repeaters, but I'll get it.
Dennis M. Wage
245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net
On Fri, Mar 2, 2018 at 9:35 AM, Floyd Epperson 1n7ulc@gmail.com wrote:
How do you reorder numbering for location? Also how do you add new frequencies or locations?
Floyd n7ulc
On Mar 2, 2018 9:16 AM, "Jim Unroe" rock.unroe@gmail.com wrote:
So when tone mode is set to none rToneFreq cToneFreq are simply
ignored?
Yes. The columns that are used are determined by the Tone Mode and Cross Mode settings. Any values in fields of the unused columns are ignored. It is best to leave these fields set to their default value. If I recall, the default value for rToneFeq and cToneFreq fields is 88.5.
This web page has links to some CHIRP column guides that might help: http://www.miklor.com/COM/UV_CHIRP.php#guides
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Floyd at 1n7ulc@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrep id.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dennis Wage at dwage@dwage.com To unsubscribe, send an email to chirp_users-unsubscribe@intrep id.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Floyd at 1n7ulc@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
participants (3)
-
Dennis Wage -
Floyd Epperson -
Jim Unroe