[chirp_users] Programming baofeng radios in the high point, Winston Salem, nc area
Anyone out there in my neck of the woods that will program a BF-F8HP radio. I have two that will transmit/receive to each other but nothing from other radios of the same kind. I cannot figure out which settings are wrong or which ones need to be set. Any help would be appreciated.
Thanks
onestewart@gmail.com
Sent From RJS on my iPhone
Use chirp to extract configs by both radios. You can then compare them. Alan W6ARH
On Tue, Jul 13, 2021, 4:10 PM Jerry Stewart via chirp_users < chirp_users@intrepid.danplanet.com> wrote:
Anyone out there in my neck of the woods that will program a BF-F8HP radio. I have two that will transmit/receive to each other but nothing from other radios of the same kind. I cannot figure out which settings are wrong or which ones need to be set. Any help would be appreciated.
Thanks
onestewart@gmail.com
Sent From RJS on my iPhone _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Silver Fox at alan.r.hill@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Probably CTSS codes programmed in that nobody else uses. Glenn ----- Original Message ----- From: "Jerry Stewart via chirp_users" chirp_users@intrepid.danplanet.com To: chirp_users@intrepid.danplanet.com Sent: Tuesday, July 13, 2021 6:09 PM Subject: [chirp_users] Programming baofeng radios in the high point,Winston Salem, nc area
Anyone out there in my neck of the woods that will program a BF-F8HP radio. I have two that will transmit/receive to each other but nothing from other radios of the same kind. I cannot figure out which settings are wrong or which ones need to be set. Any help would be appreciated.
Thanks
onestewart@gmail.com
Sent From RJS on my iPhone _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On Tue, Jul 13, 2021 at 7:10 PM Jerry Stewart via chirp_users chirp_users@intrepid.danplanet.com wrote:
Anyone out there in my neck of the woods that will program a BF-F8HP radio. I have two that will transmit/receive to each other but nothing from other radios of the same kind. I cannot figure out which settings are wrong or which ones need to be set. Any help would be appreciated.
Thanks
onestewart@gmail.com
Hi Jerry,
If the other radio uses selective squelch in the form of a CTCSS tone or DCS code, then your radio must transmit the matching tone/code or the other radio will ignore your radio's transmissions. That is how selective squelch works.
Your options are...
1 disable selective squelch on the other radios 2 programming the matching CTCSS tone/DCS code on the BF-F8HP.
Jim KC9HI
participants (4)
-
Alan Hill -
Jerry Stewart -
Jim Unroe -
K0LNY