[chirp_users] Import from stock config - option not available
Evening, I'm trying to find the "Import from stock config" functionality in CHIRP and I don't see it anywhere. The only 4 choices I have are: Radioreference.comRepeaterBookprzemienniki.netRFinder The CHIRP FAQ page indicates "These are canned frequency plans, some of which are built into chirp." Where do I find this "Import from stock config" functionality? Please advise.
On Mon, May 11, 2015 at 10:18 PM, Rich Carlson astrofan15@yahoo.com wrote:
Evening,
I'm trying to find the "Import from stock config" functionality in CHIRP and I don't see it anywhere. The only 4 choices I have are:
Radioreference.com RepeaterBook przemienniki.net RFinder
The CHIRP FAQ page indicates "These are canned frequency plans, some of which are built into chirp."
Where do I find this "Import from stock config" functionality?
Please advise.
Rich,
My guess is that you are running Linux and have installed CHIRP from one of the default repositories. I had to fall all the back to CHIRP v0.1.12 to not have the ability to "Import from stock config". So you must have CHIRP v0.1.12 or older installed.
The latest CHIRP stable build is v0.4.1. Since it is a year old, it is recommended that you install and use the latest daily build. See the download page.
http://chirp.danplanet.com/projects/chirp/wiki/Download
Jim KC9HI
Thanks Jim.
Sorry I didn't clarify this earlier. I am running on a Mac and I downloaded and used the daily build from yesterday.
Thoughts?
Rich
Sent from Yahoo Mail on Android
From:"Jim Unroe" rock.unroe@gmail.com Date:Tue, May 12, 2015 at 3:42 AM Subject:Re: [chirp_users] Import from stock config - option not available
On Mon, May 11, 2015 at 10:18 PM, Rich Carlson astrofan15@yahoo.com wrote:
Evening,
I'm trying to find the "Import from stock config" functionality in CHIRP and I don't see it anywhere. The only 4 choices I have are:
Radioreference.com RepeaterBook przemienniki.net RFinder
The CHIRP FAQ page indicates "These are canned frequency plans, some of which are built into chirp."
Where do I find this "Import from stock config" functionality?
Please advise.
Rich,
My guess is that you are running Linux and have installed CHIRP from one of the default repositories. I had to fall all the back to CHIRP v0.1.12 to not have the ability to "Import from stock config". So you must have CHIRP v0.1.12 or older installed.
The latest CHIRP stable build is v0.4.1. Since it is a year old, it is recommended that you install and use the latest daily build. See the download page.
http://chirp.danplanet.com/projects/chirp/wiki/Download
Jim KC9HI
The list of choices show that you chose 'Input from data source' instead of 'Import from stock config'. 'Input from stock config' is the fifth choice under 'Radio'
On 05/12/2015 07:19 AM, Rich Carlson wrote:
Thanks Jim.
Sorry I didn't clarify this earlier. I am running on a Mac and I downloaded and used the daily build from yesterday.
Thoughts?
Rich
Sent from Yahoo Mail on Android https://overview.mail.yahoo.com/mobile/?.src=Android
*From*:"Jim Unroe" rock.unroe@gmail.com *Date*:Tue, May 12, 2015 at 3:42 AM *Subject*:Re: [chirp_users] Import from stock config - option not available
On Mon, May 11, 2015 at 10:18 PM, Rich Carlson <astrofan15@yahoo.com javascript:return> wrote:
Evening,
I'm trying to find the "Import from stock config" functionality in
CHIRP and
I don't see it anywhere. The only 4 choices I have are:
Radioreference.com RepeaterBook przemienniki.net RFinder
The CHIRP FAQ page indicates "These are canned frequency plans, some of which are built into chirp."
Where do I find this "Import from stock config" functionality?
Please advise.
Rich,
My guess is that you are running Linux and have installed CHIRP from one of the default repositories. I had to fall all the back to CHIRP v0.1.12 to not have the ability to "Import from stock config". So you must have CHIRP v0.1.12 or older installed.
The latest CHIRP stable build is v0.4.1. Since it is a year old, it is recommended that you install and use the latest daily build. See the download page.
http://chirp.danplanet.com/projects/chirp/wiki/Download
Jim KC9HI
i'm running win7 with chirp 0.4.1. i program the freq in and go to put them in a bf-f9v2+. then i get an error - unsupported firmware version n5r 3401bfp3-25xx. can someone put me on the right path?dale
On Tuesday, May 12, 2015 12:13 PM, W Paul Mills AC0HY@WPMills.com wrote:
The list of choices show that you chose 'Input from data source' instead of 'Import from stock config'. 'Input from stock config' is the fifth choice under 'Radio'
On 05/12/2015 07:19 AM, Rich Carlson wrote:
Thanks Jim.
Sorry I didn't clarify this earlier. I am running on a Mac and I downloaded and used the daily build from yesterday.
Thoughts?
Rich
Sent from Yahoo Mail on Android https://overview.mail.yahoo.com/mobile/?.src=Android
*From*:"Jim Unroe" rock.unroe@gmail.com *Date*:Tue, May 12, 2015 at 3:42 AM *Subject*:Re: [chirp_users] Import from stock config - option not available
On Mon, May 11, 2015 at 10:18 PM, Rich Carlson <astrofan15@yahoo.com javascript:return> wrote:
Evening,
I'm trying to find the "Import from stock config" functionality in
CHIRP and
I don't see it anywhere. The only 4 choices I have are:
Radioreference.com RepeaterBook przemienniki.net RFinder
The CHIRP FAQ page indicates "These are canned frequency plans, some of which are built into chirp."
Where do I find this "Import from stock config" functionality?
Please advise.
Rich,
My guess is that you are running Linux and have installed CHIRP from one of the default repositories. I had to fall all the back to CHIRP v0.1.12 to not have the ability to "Import from stock config". So you must have CHIRP v0.1.12 or older installed.
The latest CHIRP stable build is v0.4.1. Since it is a year old, it is recommended that you install and use the latest daily build. See the download page.
http://chirp.danplanet.com/projects/chirp/wiki/Download
Jim KC9HI
CHIRP 0.4.1 is nearly a year old and the V2+ didn’t exist at that time. Always use CHIRP’s Latest Daily Build.
The V2+ is a copy of the F8HP. That’s the option you need to select.
John http://www.miklor.com/F8HP
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Dale Watchorn Sent: Tuesday, May 12, 2015 1:44 PM To: Discussion of CHIRP Subject: Re: [chirp_users] Import from stock config - option not available
i'm running win7 with chirp 0.4.1. i program the freq in and go to put them in a bf-f9v2+. then i get an error - unsupported firmware version n5r 3401bfp3-25xx. can someone put me on the right path?
dale
On Tuesday, May 12, 2015 12:13 PM, W Paul Mills AC0HY@WPMills.com wrote:
The list of choices show that you chose 'Input from data source' instead of 'Import from stock config'. 'Input from stock config' is the fifth choice under 'Radio'
On 05/12/2015 07:19 AM, Rich Carlson wrote:
Thanks Jim.
Sorry I didn't clarify this earlier. I am running on a Mac and I downloaded and used the daily build from yesterday.
Thoughts?
Rich
Sent from Yahoo Mail on Android https://overview.mail.yahoo.com/mobile/?.src=Android
*From*:"Jim Unroe" rock.unroe@gmail.com *Date*:Tue, May 12, 2015 at 3:42 AM *Subject*:Re: [chirp_users] Import from stock config - option not available
On Mon, May 11, 2015 at 10:18 PM, Rich Carlson <astrofan15@yahoo.com javascript:return> wrote:
Evening,
I'm trying to find the "Import from stock config" functionality in
CHIRP and
I don't see it anywhere. The only 4 choices I have are:
Radioreference.com RepeaterBook przemienniki.net RFinder
The CHIRP FAQ page indicates "These are canned frequency plans, some of which are built into chirp."
Where do I find this "Import from stock config" functionality?
Please advise.
Rich,
My guess is that you are running Linux and have installed CHIRP from one of the default repositories. I had to fall all the back to CHIRP v0.1.12 to not have the ability to "Import from stock config". So you must have CHIRP v0.1.12 or older installed.
The latest CHIRP stable build is v0.4.1. Since it is a year old, it is recommended that you install and use the latest daily build. See the download page.
http://chirp.danplanet.com/projects/chirp/wiki/Download
Jim KC9HI
The 4 options I listed below are the only options available under "Radio / Import from Data Source" and "Radio / Query Data Source". There is no 5th option for "Import from stock config" (greyed out or otherwise). And I have two tabs open at this time: My download from radio tab, and a new empty tab that I just created to see if that would help. The 4 selections are the same on both tabs.
And I'm running on a Mac (Yosemite 10.10.3) if that makes any difference.
From: W Paul Mills AC0HY@WPMills.com To: chirp_users@intrepid.danplanet.com Sent: Tuesday, May 12, 2015 10:57 AM Subject: Re: [chirp_users] Import from stock config - option not available
The list of choices show that you chose 'Input from data source' instead of 'Import from stock config'. 'Input from stock config' is the fifth choice under 'Radio'
On 05/12/2015 07:19 AM, Rich Carlson wrote:
Thanks Jim.
Sorry I didn't clarify this earlier. I am running on a Mac and I downloaded and used the daily build from yesterday.
Thoughts?
Rich
Sent from Yahoo Mail on Android https://overview.mail.yahoo.com/mobile/?.src=Android
*From*:"Jim Unroe" rock.unroe@gmail.com *Date*:Tue, May 12, 2015 at 3:42 AM *Subject*:Re: [chirp_users] Import from stock config - option not available
On Mon, May 11, 2015 at 10:18 PM, Rich Carlson <astrofan15@yahoo.com javascript:return> wrote:
Evening,
I'm trying to find the "Import from stock config" functionality in
CHIRP and
I don't see it anywhere. The only 4 choices I have are:
Radioreference.com RepeaterBook przemienniki.net RFinder
The CHIRP FAQ page indicates "These are canned frequency plans, some of which are built into chirp."
Where do I find this "Import from stock config" functionality?
Please advise.
Rich,
My guess is that you are running Linux and have installed CHIRP from one of the default repositories. I had to fall all the back to CHIRP v0.1.12 to not have the ability to "Import from stock config". So you must have CHIRP v0.1.12 or older installed.
The latest CHIRP stable build is v0.4.1. Since it is a year old, it is recommended that you install and use the latest daily build. See the download page.
http://chirp.danplanet.com/projects/chirp/wiki/Download
Jim KC9HI
On Tue, May 12, 2015 at 6:12 PM, Rich Carlson astrofan15@yahoo.com wrote:
The 4 options I listed below are the only options available under "Radio / Import from Data Source" and "Radio / Query Data Source". There is no 5th option for "Import from stock config" (greyed out or otherwise).
And I have two tabs open at this time: My download from radio tab, and a new empty tab that I just created to see if that would help. The 4 selections are the same on both tabs.
And I'm running on a Mac (Yosemite 10.10.3) if that makes any difference.
You'll have to bear with me, I'm not a Mac person. You do have the "KK7DS Python runtime" installed, right?
Jim KC9HI
Yes sir KK7DS Python Runtime R10 is installed.
I was able to successfully download info from RepeaterBook, so Chirp is partially working. Just no sign of stock config anywhere.
Rich
Sent from Yahoo Mail on Android
From:"Jim Unroe" rock.unroe@gmail.com Date:Tue, May 12, 2015 at 4:29 PM Subject:Re: [chirp_users] Import from stock config - option not available
On Tue, May 12, 2015 at 6:12 PM, Rich Carlson astrofan15@yahoo.com wrote:
The 4 options I listed below are the only options available under "Radio / Import from Data Source" and "Radio / Query Data Source". There is no 5th option for "Import from stock config" (greyed out or otherwise).
And I have two tabs open at this time: My download from radio tab, and a new empty tab that I just created to see if that would help. The 4 selections are the same on both tabs.
And I'm running on a Mac (Yosemite 10.10.3) if that makes any difference.
You'll have to bear with me, I'm not a Mac person. You do have the "KK7DS Python runtime" installed, right?
Jim KC9HI
participants (5)
-
Dale Watchorn -
Jim Unroe -
John LaMartina -
Rich Carlson -
W Paul Mills