[chirp_users] Base image of settings for an Anytone AT-5888UV
I'm trying to resolve a operation function with my AT-5888UV.
If you don't have any issue with receiving on both the UHF and VHF bands with one on the left and the on the right, I am after a CHiRP image downloaded from your transceiver.
Thanks to anyone who can help me out
Malcolm Larkin VK2FITH
Attached is an img file I use with no problems.
Eldon Griffiths KG7JDF
On 9/21/2014 5:09 PM, Malcolm Larkin wrote:
I'm trying to resolve a operation function with my AT-5888UV.
If you don't have any issue with receiving on both the UHF and VHF bands with one on the left and the on the right, I am after a CHiRP image downloaded from your transceiver.
Thanks to anyone who can help me out
Malcolm Larkin VK2FITH
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
Malcolm
We could use some more information on your problem with the Anytone. I have 2 anytone units in service.
Todd Bloomingdale Tomah, WI
On Sun, Sep 21, 2014 at 6:09 PM, Malcolm Larkin malcolm.larkin@icloud.com wrote:
I'm trying to resolve a operation function with my AT-5888UV.
If you don't have any issue with receiving on both the UHF and VHF bands with one on the left and the on the right, I am after a CHiRP image downloaded from your transceiver.
Thanks to anyone who can help me out
Malcolm Larkin VK2FITH
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
The issue I have....
If I program in 3 simplex channels,
the 1st one is VHF, The other two are UHF.
I can receive on the VHF channel both when it is primary and when it is secondary, regardless of being left or right.
With the UHF channels, I can only receive either UHF frequency on the secondary when the primary is also on a UHF frequency or channel, doesn't matter which way for left and right.
participants (3)
-
Eldon Griffiths -
Malcolm Larkin -
Todd Bloomingdale