Apparently this is an issue on the radio, not with the Chirp software. After programming the offset with Chirp, it operates on the local repeater (with the offset that I put in Chirp) as it should even though it doesn't display the offset on the radio menu. I should have tested this out a little more before submitting the first message. Apologies.

73, Daniel KK4MKZ

On Wed, Nov 14, 2012 at 2:00 PM, <chirp_users-request@intrepid.danplanet.com

wrote:

Send chirp_users mailing list submissions to chirp_users@intrepid.danplanet.com

To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request@intrepid.danplanet.com

You can reach the person managing the list at chirp_users-owner@intrepid.danplanet.com

When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..."

Today's Topics:

1. Offset on UV-5R FW Ver BFB293 (Daniel Marcum)

---

Message: 1 Date: Wed, 14 Nov 2012 11:55:15 -0600 From: Daniel Marcum dwmarcum@gmail.com Subject: [chirp_users] Offset on UV-5R FW Ver BFB293 To: chirp_users@intrepid.danplanet.com Message-ID: < CA+eYo4wmYV7czNDHgvvr2YtF22KNj6gyLKQFcN6AwOsHNNDoGA@mail.gmail.com> Content-Type: text/plain; charset="iso-8859-1"

I realize this is a new version of the firmware for this radio and that there are several compatibility issues and such (like with the Settings menu), so this may already be a known issue. When using the CHIRP daily-20121106 software, if you set an offset (0.600 for example) in the software and upload it to the radio, then go to the offset menu item on the radio it will just show 00.000.

73, Daniel KK4MKZ