[chirp_users] Disable Transmitting on BaoFeng UV-5R Dual Band Two
Can some one help me, I don’t have my ham license yet and don’t want to accidently transmit? And does it transmit a signal on start up?
Sent from Mail for Windows 10
You will have to depress the Press To Talk button (PTT) to transmit. And I am pretty sure that no HAM bands are pre-installed. Glenn ----- Original Message ----- From: Cade Woolaway To: chirp_users@intrepid.danplanet.com Sent: Sunday, August 26, 2018 10:19 PM Subject: [chirp_users] Disable Transmitting on BaoFeng UV-5R Dual Band Two
Can some one help me, I don’t have my ham license yet and don’t want to accidently transmit? And does it transmit a signal on start up?
Sent from Mail for Windows 10
--------------------------------------------------------------------------------
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On Sun, Aug 26, 2018 at 11:19 PM, Cade Woolaway woolawaywx@gmail.com wrote:
Can some one help me, I don’t have my ham license yet and don’t want to accidently transmit? And does it transmit a signal on start up?
To program a memory channel with TX disabled, set the Duplex field to "off".
You can't disable transmitting in VFO mode unless you completely disable the VFO. To disable the VFO, set the lower band limit to a value that is higher than the upper band limit for both the VHF and UHF bands (I just swap them).
Good luck on getting you ham license.
Jim KC9HI
participants (3)
-
Cade Woolaway -
Glenn At Home -
Jim Unroe