I have searched the archive and could not find an answer.
I just purchased a Btech FTDI programming cable. I have been unable to use this cable with the CHRIP programming software, I get a "No response from radio" error message when I try to read any Baofeng radio. I have multiple UV-5R and BF-888s radios, I have tried programming on 3 different computers using Windows 7, 10 and 11 with the same problem! When I look at the device manager, everything looks correct on all 3 computers. If I try using the BF-888 software on the BF-888s radio everything works as it should!
Do you have any suggestions to fix this problem?
On Fri, Nov 15, 2024 at 4:48 PM Ramon Jones via Users users@lists.chirpmyradio.com wrote:
I have searched the archive and could not find an answer.
I just purchased a Btech FTDI programming cable. I have been unable to use this cable with the CHRIP programming software, I get a "No response from radio" error message when I try to read any Baofeng radio. I have multiple UV-5R and BF-888s radios, I have tried programming on 3 different computers using Windows 7, 10 and 11 with the same problem! When I look at the device manager, everything looks correct on all 3 computers. If I try using the BF-888 software on the BF-888s radio everything works as it should!
Do you have any suggestions to fix this problem?
Hi Ramon,
My recommendation would be to open a ticket for support and include a debug.log file.
Jim KC9HI
In the past I bought also a programming cable with counterfit FTDI chip in it. Windows refuses to work with it. With a legitimate chip it does work. Maybe this is your problem?
Kind regards, Met vriendelijke groet, Henk Warnitz
Excuses als ik wat kort reageer. Een mobiel typt wat slecht.
Verstuurd vanaf mijn 🍏
Op 15 nov 2024 om 22:48 heeft Ramon Jones via Users users@lists.chirpmyradio.com het volgende geschreven:
I have searched the archive and could not find an answer.
I just purchased a Btech FTDI programming cable. I have been unable to use this cable with the CHRIP programming software, I get a "No response from radio" error message when I try to read any Baofeng radio. I have multiple UV-5R and BF-888s radios, I have tried programming on 3 different computers using Windows 7, 10 and 11 with the same problem! When I look at the device manager, everything looks correct on all 3 computers. If I try using the BF-888 software on the BF-888s radio everything works as it should!
Do you have any suggestions to fix this problem? _______________________________________________ Users mailing list users@lists.chirpmyradio.com https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com To unsubscribe, send an email to users-leave@lists.chirpmyradio.com To report this email as off-topic, please email users-owner@lists.chirpmyradio.com List archives: https://lists.chirpmyradio.com/hyperkitty/list/users@lists.chirpmyradio.com/
I had the same problem with baofeng UV-5RH. Yesterday I reinstalled chirp witge the latest version and now it works fine.
Did you get the last version, it repaired some bugs.
Gr. Toine
PE1PPY
On 16 nov 2024 at 17:41, Henk Warnitz via Users users@lists.chirpmyradio.com wrote:
In the past I bought also a programming cable with counterfit FTDI chip in it. Windows refuses to work with it. With a legitimate chip it does work. Maybe this is your problem?
Kind regards, Met vriendelijke groet, Henk Warnitz
Excuses als ik wat kort reageer. Een mobiel typt wat slecht.
Verstuurd vanaf mijn 🍏
Op 15 nov 2024 om 22:48 heeft Ramon Jones via Users users@lists.chirpmyradio.com het volgende geschreven:
I have searched the archive and could not find an answer.
I just purchased a Btech FTDI programming cable. I have been unable to use this cable with the CHRIP programming software, I get a "No response from radio" error message when I try to read any Baofeng radio. I have multiple UV-5R and BF-888s radios, I have tried programming on 3 different computers using Windows 7, 10 and 11 with the same problem! When I look at the device manager, everything looks correct on all 3 computers. If I try using the BF-888 software on the BF-888s radio everything works as it should!
Do you have any suggestions to fix this problem? _______________________________________________ Users mailing list users@lists.chirpmyradio.com https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com To unsubscribe, send an email to users-leave@lists.chirpmyradio.com To report this email as off-topic, please email users-owner@lists.chirpmyradio.com List archives: https://lists.chirpmyradio.com/hyperkitty/list/users@lists.chirpmyradio.com/
Users mailing list users@lists.chirpmyradio.com https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com To unsubscribe, send an email to users-leave@lists.chirpmyradio.com To report this email as off-topic, please email users-owner@lists.chirpmyradio.com List archives: https://lists.chirpmyradio.com/hyperkitty/list/users@lists.chirpmyradio.com/
participants (4)
-
Henk Warnitz -
Jim Unroe -
kerstens.a -
Ramon Jones