[chirp_users] Fwd: Chirp Files
Here are the files
Clean BFF8HP is the clean radio image
Beevo 857 ....cut Test1 file is the file I tried to import into Chrip. This has all the repeaters and other channels I am trying to get into Chirp>BF F8HP
Single channel export entered export is a manually programmed repeater channel that works to see what the formatting looks like after bring back from the radio to Chirp.
Respectfully Mark Phillips AD1E
Sent from my iPad
Begin forwarded message:
Mark,
Take a look at these. You should be able to see the differences.
Jim KC9HI
On Fri, Sep 12, 2014 at 5:51 PM, Prepared Ham ad@preparedham.com wrote:
Here are the files
*Clean BFF8HP* is the clean radio image
*Beevo 857 ....cut Test1* file is the file I tried to import into Chrip. This has all the repeaters and other channels I am trying to get into Chirp>BF F8HP
*Single channel export entered export* is a manually programmed repeater channel that works to see what the formatting looks like after bring back from the radio to Chirp.
Respectfully Mark Phillips AD1E
Sent from my iPad
Begin forwarded message:
Jim
Thanks a bunch!!!!
I see the errors right off the bat.
I owe you a beer.
Down loaded to the radio and it works fine.
I need to alter the channel numbers so I can get the full 128 into this radio and have matching channel numbers on my Powerwerx Mobile in the truck. http://www.powerwerx.com/two-way-radios/mobile-radios/db-750x-dual-band-comm...
Respectfully
AD1E
Sent from my iPad
On Sep 12, 2014, at 3:50 PM, Jim Unroe rock.unroe@gmail.com wrote:
Mark,
Take a look at these. You should be able to see the differences.
Jim KC9HI
On Fri, Sep 12, 2014 at 5:51 PM, Prepared Ham ad@preparedham.com wrote: Here are the files
Clean BFF8HP is the clean radio image
Beevo 857 ....cut Test1 file is the file I tried to import into Chrip. This has all the repeaters and other channels I am trying to get into Chirp>BF F8HP
Single channel export entered export is a manually programmed repeater channel that works to see what the formatting looks like after bring back from the radio to Chirp.
Respectfully Mark Phillips AD1E
Sent from my iPad
Begin forwarded message:
<beevo 857 file cut 128 Baofeng channel Test 2 .csv> <beevo 857 file cut 128 Baofeng channel Test 2.img> _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
Mark, The files that you provided didn't have the offset amount so I just set all VHF to .6 MHz and all UHF to 5.0 MHz. You may have to double check them in case some ODD offset amounts are used. Jim
On Fri, Sep 12, 2014 at 7:22 PM, Prepared Ham ad@preparedham.com wrote:
Jim
Thanks a bunch!!!!
I see the errors right off the bat.
I owe you a beer.
Down loaded to the radio and it works fine.
I need to alter the channel numbers so I can get the full 128 into this radio and have matching channel numbers on my Powerwerx Mobile in the truck. http://www.powerwerx.com/two-way-radios/mobile-radios/db-750x-dual-band-comm...
Respectfully
AD1E
Sent from my iPad
On Sep 12, 2014, at 3:50 PM, Jim Unroe rock.unroe@gmail.com wrote:
Mark,
Take a look at these. You should be able to see the differences.
Jim KC9HI
On Fri, Sep 12, 2014 at 5:51 PM, Prepared Ham ad@preparedham.com wrote:
Here are the files
*Clean BFF8HP* is the clean radio image
*Beevo 857 ....cut Test1* file is the file I tried to import into Chrip. This has all the repeaters and other channels I am trying to get into Chirp>BF F8HP
*Single channel export entered export* is a manually programmed repeater channel that works to see what the formatting looks like after bring back from the radio to Chirp.
Respectfully Mark Phillips AD1E
Sent from my iPad
Begin forwarded message:
<beevo 857 file cut 128 Baofeng channel Test 2 .csv>
<beevo 857 file cut 128 Baofeng channel Test 2.img>
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
Thank you sir. I will do that.
If your around Indy in April 20-25 I will buy that beer I owe you.
Respectfully
AD1E Mark Phillips
Sent from my iPad
On Sep 12, 2014, at 4:50 PM, Jim Unroe rock.unroe@gmail.com wrote:
Mark, The files that you provided didn't have the offset amount so I just set all VHF to .6 MHz and all UHF to 5.0 MHz. You may have to double check them in case some ODD offset amounts are used. Jim
On Fri, Sep 12, 2014 at 7:22 PM, Prepared Ham ad@preparedham.com wrote: Jim
Thanks a bunch!!!!
I see the errors right off the bat.
I owe you a beer.
Down loaded to the radio and it works fine.
I need to alter the channel numbers so I can get the full 128 into this radio and have matching channel numbers on my Powerwerx Mobile in the truck. http://www.powerwerx.com/two-way-radios/mobile-radios/db-750x-dual-band-comm...
Respectfully
AD1E
Sent from my iPad
On Sep 12, 2014, at 3:50 PM, Jim Unroe rock.unroe@gmail.com wrote:
Mark,
Take a look at these. You should be able to see the differences.
Jim KC9HI
On Fri, Sep 12, 2014 at 5:51 PM, Prepared Ham ad@preparedham.com wrote: Here are the files
Clean BFF8HP is the clean radio image
Beevo 857 ....cut Test1 file is the file I tried to import into Chrip. This has all the repeaters and other channels I am trying to get into Chirp>BF F8HP
Single channel export entered export is a manually programmed repeater channel that works to see what the formatting looks like after bring back from the radio to Chirp.
Respectfully Mark Phillips AD1E
Sent from my iPad
Begin forwarded message:
<beevo 857 file cut 128 Baofeng channel Test 2 .csv> <beevo 857 file cut 128 Baofeng channel Test 2.img> _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
participants (2)
-
Jim Unroe -
Prepared Ham