[chirp_users] DCS problem on BTECH UVX2-50
Hello all,
This is not stricly Chirp related but I need you help on programming my radios with selective DCS.
I use the radios in a car racing team and I need to be abe to talk to this car or that car but also to all the cars at the same time.
I have made a setup which runs fine to speak to each car individualy but I can't talk to all of them at the same time, here's what I did.
Same frequency for all channels
DCS RX specific to each car (X for car 1, Y for car 2, etc.....) No DCS TX on the cars radios so that when the driver speaks everyone car hear it (except the other cars of course) I made several channels on the pit radios with a matching DCS TX for car 1, car 2 and no DCS at all to be able to talk to the other pits radios)
I'd like to make a new DCS RX on all cars (200) so that I could talk to ALL cars at the same time but when I program it on the cars radios it does not work, the car does not receive it.
I made a dual watch so that the car receiving radio should switch from the "this car only" channel to the "all cars channel" but somehow it does not receive.
What did I do wrong ?
Thanks for the help
YOU ASKED THIS 10 DAYS AGO????? MAYBE IT CAN'T BE DONE, TRY THE BTECH WEBSITE. ----- Original Message ----- From: "Jean-Charles HUILLIER" jchuillier@free.fr To: chirp_users@intrepid.danplanet.com Sent: 29 June, 2018 01:23 Subject: [chirp_users] DCS problem on BTECH UVX2-50
Hello all,
This is not stricly Chirp related but I need you help on programming my radios with selective DCS.
I use the radios in a car racing team and I need to be abe to talk to this car or that car but also to all the cars at the same time.
I have made a setup which runs fine to speak to each car individualy but I can't talk to all of them at the same time, here's what I did.
Same frequency for all channels
DCS RX specific to each car (X for car 1, Y for car 2, etc.....) No DCS TX on the cars radios so that when the driver speaks everyone car hear it (except the other cars of course) I made several channels on the pit radios with a matching DCS TX for car 1, car 2 and no DCS at all to be able to talk to the other pits radios)
I'd like to make a new DCS RX on all cars (200) so that I could talk to ALL cars at the same time but when I program it on the cars radios it does not work, the car does not receive it.
I made a dual watch so that the car receiving radio should switch from the "this car only" channel to the "all cars channel" but somehow it does not receive.
What did I do wrong ?
Thanks for the help _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to ZIPPY at zip.doe@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
I made a dual watch so that the car receiving radio should switch from the "this car only" channel to the "all cars channel" but somehow it does not receive.
It won't work. These radios only have one receiver. Dual watch scans between the 2 memory channels. I'd have to test it to know for sure, but my guess is that dual watch is carrier based. Which ever memory sees the signal first will cause scanning between the 2 memory channels to stop. If scanning stops on the memory channel with per car DCS code and you are transmitting with the all car DCS code, the driver will hear nothing. If scanning stops on the memory channel with the all car DCS code and you are transmitting with the per car DCS code, the driver will hear nothing.
Jim
participants (3)
-
Jean-Charles HUILLIER -
Jim Unroe -
ZIPPY