Note though, that support for the PX-2R is also not working.  Reading from or writing to the radio, especially writing to the rig, as it will need a full factory reset afterwards, loosing anything you may have manually entered into the rig.

See https://chirp.danplanet.com/issues/6389

for details.

Bernhard Hailer did look into it, for which I'm grateful, and reported that there seems to be a fundamental data value range limit issue elsewhere in Chirp that causes problems.

"Looks like the number of DCS codes reported by the radio exceeds what Chirp expects or can handle."

If my Python foo was up to snuff I'd have a go at fixing it myself, but like other large open source projects, it's not just the individual specific radio code that one needs to understand to be able to do all that, and like many I don't have enough of that sort of contiguous time to spend getting my faded grey cell around it.  :-(

Coding is not the problem, but understanding what others have done before, and why, is.

73

Dave G0WBX

On 02/07/2021 20:00, chirp_users-request@intrepid.danplanet.com wrote:

...

From the supported radio list:

Puxing PX-2R (UHF) PX-777 PX-888K