Used latest version of chirp for win10 to add channels my new radio It will not scan in channel mode. It only scans channel 1,2 and 3. Even tho chirp uploaded 117 channels into radio. Any help would be appreciated
Sent from my iPhone George Monks
Are you suggesting that you filled in the skip column appropriately and that the image Chirp sent to the radio doesn't work properly for those channel settings?
On Wed, Feb 10, 2021 at 9:50 PM george monks monksgeo@gmail.com wrote:
Used latest version of chirp for win10 to add channels my new radio It will not scan in channel mode. It only scans channel 1,2 and 3. Even tho chirp uploaded 117 channels into radio. Any help would be appreciated
Sent from my iPhone George Monks _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rudolph Gutzerhagen at rudolph.gutzerhagen@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Actually I didnt do anything with the skip column. I imported some of chirps preloaded frequencies like the weather channels and frs and murs freq. the radio only scans a few channels. Does the “S” in the skip mean “scan” or skip? That may be my issue
Sent from my iPhone George Monks
On Feb 10, 2021, at 10:33 PM, Rudolph Gutzerhagen rudolph.gutzerhagen@gmail.com wrote:
Are you suggesting that you filled in the skip column appropriately and that the image Chirp sent to the radio doesn't work properly for those channel settings?
On Wed, Feb 10, 2021 at 9:50 PM george monks monksgeo@gmail.com wrote: Used latest version of chirp for win10 to add channels my new radio It will not scan in channel mode. It only scans channel 1,2 and 3. Even tho chirp uploaded 117 channels into radio. Any help would be appreciated
Sent from my iPhone George Monks _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rudolph Gutzerhagen at rudolph.gutzerhagen@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to george w monks at monksgeo@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
i get the impression from looking at the driver code that *"S"* on the Chirp side means *SKIP* this channel during a scan operation. The Chirp value is set in the Radio as '1' ON for scan, and '0' OFF for skip I believe.
It's always possible that the meanings get mixed up; that is a long explanation, but you should observe consistent results from run to run without things mixing up between runs.
On Wed, Feb 10, 2021 at 10:55 PM george monks monksgeo@gmail.com wrote:
Actually I didnt do anything with the skip column. I imported some of chirps preloaded frequencies like the weather channels and frs and murs freq. the radio only scans a few channels. Does the “S” in the skip mean “scan” or skip? That may be my issue
Sent from my iPhone George Monks
On Feb 10, 2021, at 10:33 PM, Rudolph Gutzerhagen < rudolph.gutzerhagen@gmail.com> wrote:
Are you suggesting that you filled in the skip column appropriately and that the image Chirp sent to the radio doesn't work properly for those channel settings?
On Wed, Feb 10, 2021 at 9:50 PM george monks monksgeo@gmail.com wrote:
Used latest version of chirp for win10 to add channels my new radio It will not scan in channel mode. It only scans channel 1,2 and 3. Even tho chirp uploaded 117 channels into radio. Any help would be appreciated
Sent from my iPhone George Monks _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rudolph Gutzerhagen at rudolph.gutzerhagen@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to george w monks at monksgeo@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rudolph Gutzerhagen at rudolph.gutzerhagen@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
I designated all the weather Chanel’s to “s”under skip and the results occur. I sent the retailer (two way radio” in sc the chirp saved file and they got it upload and scan perfectly. Really weird
Sent from my iPhone George Monks
On Feb 10, 2021, at 11:22 PM, Rudolph Gutzerhagen rudolph.gutzerhagen@gmail.com wrote:
i get the impression from looking at the driver code that "S" on the Chirp side means SKIP this channel during a scan operation. The Chirp value is set in the Radio as '1' ON for scan, and '0' OFF for skip I believe.
It's always possible that the meanings get mixed up; that is a long explanation, but you should observe consistent results from run to run without things mixing up between runs.
On Wed, Feb 10, 2021 at 10:55 PM george monks monksgeo@gmail.com wrote: Actually I didnt do anything with the skip column. I imported some of chirps preloaded frequencies like the weather channels and frs and murs freq. the radio only scans a few channels. Does the “S” in the skip mean “scan” or skip? That may be my issue
Sent from my iPhone George Monks
On Feb 10, 2021, at 10:33 PM, Rudolph Gutzerhagen rudolph.gutzerhagen@gmail.com wrote:
Are you suggesting that you filled in the skip column appropriately and that the image Chirp sent to the radio doesn't work properly for those channel settings?
On Wed, Feb 10, 2021 at 9:50 PM george monks monksgeo@gmail.com wrote: Used latest version of chirp for win10 to add channels my new radio It will not scan in channel mode. It only scans channel 1,2 and 3. Even tho chirp uploaded 117 channels into radio. Any help would be appreciated
Sent from my iPhone George Monks _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rudolph Gutzerhagen at rudolph.gutzerhagen@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to george w monks at monksgeo@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rudolph Gutzerhagen at rudolph.gutzerhagen@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to george w monks at monksgeo@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Rudolph I uploaded two frequencies 144.98750 and 448.98750 that was on the phone originally from the factory using the wouxun software and a few more and guess what. It scans all Chanel’s!!!!!! I then went to chirp software and kept those two original channels in channel 1-2 plus 100 more. It uploaded fine!! And scanned. Don’t understand why those first two freq had to be in channel 1 and 2 Oh well. Thanks for helping a newbie. I’m taking tech test feb 29th
Sent from my iPhone George Monks 2012133231
On Feb 10, 2021, at 11:58 PM, george monks monksgeo@gmail.com wrote:
I designated all the weather Chanel’s to “s”under skip and the results occur. I sent the retailer (two way radio” in sc the chirp saved file and they got it upload and scan perfectly. Really weird
Sent from my iPhone George Monks
On Feb 10, 2021, at 11:22 PM, Rudolph Gutzerhagen rudolph.gutzerhagen@gmail.com wrote:
i get the impression from looking at the driver code that "S" on the Chirp side means SKIP this channel during a scan operation. The Chirp value is set in the Radio as '1' ON for scan, and '0' OFF for skip I believe.
It's always possible that the meanings get mixed up; that is a long explanation, but you should observe consistent results from run to run without things mixing up between runs.
On Wed, Feb 10, 2021 at 10:55 PM george monks monksgeo@gmail.com wrote: Actually I didnt do anything with the skip column. I imported some of chirps preloaded frequencies like the weather channels and frs and murs freq. the radio only scans a few channels. Does the “S” in the skip mean “scan” or skip? That may be my issue
Sent from my iPhone George Monks
On Feb 10, 2021, at 10:33 PM, Rudolph Gutzerhagen rudolph.gutzerhagen@gmail.com wrote:
Are you suggesting that you filled in the skip column appropriately and that the image Chirp sent to the radio doesn't work properly for those channel settings?
On Wed, Feb 10, 2021 at 9:50 PM george monks monksgeo@gmail.com wrote: Used latest version of chirp for win10 to add channels my new radio It will not scan in channel mode. It only scans channel 1,2 and 3. Even tho chirp uploaded 117 channels into radio. Any help would be appreciated
Sent from my iPhone George Monks _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rudolph Gutzerhagen at rudolph.gutzerhagen@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to george w monks at monksgeo@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rudolph Gutzerhagen at rudolph.gutzerhagen@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to george w monks at monksgeo@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
There is no February 29th this year.
Joe Pizzi KI5LST
On 2/11/2021 8:17 AM, george monks wrote:
Rudolph I uploaded two frequencies 144.98750 and 448.98750 that was on the phone originally from the factory using the wouxun software and a few more and guess what. It scans all Chanel’s!!!!!! I then went to chirp software and kept those two original channels in channel 1-2 plus 100 more. It uploaded fine!! And scanned. Don’t understand why those first two freq had to be in channel 1 and 2 Oh well. Thanks for helping a newbie. I’m taking tech test feb 29th x-apple-data-detectors://0
Sent from my iPhone George Monks 2012133231
On Feb 10, 2021, at 11:58 PM, george monks monksgeo@gmail.com wrote:
I designated all the weather Chanel’s to “s”under skip and the results occur. I sent the retailer (two way radio” in sc the chirp saved file and they got it upload and scan perfectly. Really weird
Sent from my iPhone George Monks
On Feb 10, 2021, at 11:22 PM, Rudolph Gutzerhagen rudolph.gutzerhagen@gmail.com wrote:
i get the impression from looking at the driver code that *"S"* on the Chirp side means *SKIP* this channel during a scan operation. The Chirp value is set in the Radio as '1' ON for scan, and '0' OFF for skip I believe.
It's always possible that the meanings get mixed up; that is a long explanation, but you should observe consistent results from run to run without things mixing up between runs.
On Wed, Feb 10, 2021 at 10:55 PM george monks <monksgeo@gmail.com mailto:monksgeo@gmail.com> wrote:
Actually I didnt do anything with the skip column. I imported some of chirps preloaded frequencies like the weather channels and frs and murs freq. the radio only scans a few channels. Does the “S” in the skip mean “scan” or skip? That may be my issue Sent from my iPhone George MonksOn Feb 10, 2021, at 10:33 PM, Rudolph Gutzerhagen <rudolph.gutzerhagen@gmail.com <mailto:rudolph.gutzerhagen@gmail.com>> wrote: Are you suggesting that you filled in the skip column appropriately and that the image Chirp sent to the radio doesn't work properly for those channel settings? On Wed, Feb 10, 2021 at 9:50 PM george monks <monksgeo@gmail.com <mailto:monksgeo@gmail.com>> wrote: Used latest version of chirp for win10 to add channels my new radio It will not scan in channel mode. It only scans channel 1,2 and 3. Even tho chirp uploaded 117 channels into radio. Any help would be appreciated Sent from my iPhone George Monks _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> This message was sent to Rudolph Gutzerhagen at rudolph.gutzerhagen@gmail.com <mailto:rudolph.gutzerhagen@gmail.com> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> This message was sent to george w monks at monksgeo@gmail.com <mailto:monksgeo@gmail.com> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com>_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> This message was sent to Rudolph Gutzerhagen at rudolph.gutzerhagen@gmail.com <mailto:rudolph.gutzerhagen@gmail.com> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com>
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to george w monks at monksgeo@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joe Pizzi at pizzi.joe@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Thanks for that Joe, but you really should stop that drinkin n dancin.
On Sat, Feb 13, 2021 at 8:25 PM Joe Pizzi pizzi.joe@gmail.com wrote:
There is no February 29th this year.
Joe Pizzi KI5LST On 2/11/2021 8:17 AM, george monks wrote:
Rudolph <...>
participants (3)
-
george monks -
Joe Pizzi -
Rudolph Gutzerhagen