[chirp_users] Using the Wouxon KG-UV8D as a scanner
I've populated my local police and fire frequencies into my 8D. The only issue is, CHIRP tells me that setting the offset to "off" so that the frequency is Rx only is not supported on the 8D. What have others done to make frequencies Rx only? Steve Gouveia pctek@pacbell.net
I am not familiar with the KG-UV8D, but for my KG-UVD1P, under Settings there is a "Freq ranges” selection which allows setting the upper and lower band limits for both TX and RX. If a memory channel is outside the TX band limits, it should be RX-only,
Bob, N7XY
On Apr 1, 2015, at 12:23 PM, Steve Gouveia pctek@pacbell.net wrote:
I've populated my local police and fire frequencies into my 8D. The only issue is, CHIRP tells me that setting the offset to "off" so that the frequency is Rx only is not supported on the 8D.
What have others done to make frequencies Rx only?
Steve Gouveia pctek@pacbell.net
Try setting it to 0.000000 From: Steve Gouveia pctek@pacbell.net To: "chirp_users@intrepid.danplanet.com" chirp_users@intrepid.danplanet.com Sent: Wednesday, April 1, 2015 3:23 PM Subject: [chirp_users] Using the Wouxon KG-UV8D as a scanner
I've populated my local police and fire frequencies into my 8D. The only issue is, CHIRP tells me that setting the offset to "off" so that the frequency is Rx only is not supported on the 8D. What have others done to make frequencies Rx only? Steve Gouveia pctek@pacbell.net
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
CHIRP does support this option. It appears you are trying to set the wrong field…
Under DUPLEX, select to OFF option
John http://www.miklor.com/UV8D
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Steve Gouveia Sent: Wednesday, April 01, 2015 3:23 PM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Using the Wouxon KG-UV8D as a scanner
I've populated my local police and fire frequencies into my 8D. The only issue is, CHIRP tells me that setting the offset to "off" so that the frequency is Rx only is not supported on the 8D.
What have others done to make frequencies Rx only?
Steve Gouveia pctek@pacbell.net
participants (4)
-
Bob Nielsen -
John LaMartina -
John Wuest -
Steve Gouveia