I am using UV 5R for the. G U. I. Down load is fine. But cannot upload to radio I get error code. Unsupported firmware version. N 5 R 3403f8HP 1. XX Lost again. Thanks for all support Larry. n6nev.
Larry,
This is because you are using the CHIRP stable build and it does not support the radios with 3 power levels. You must use a CHIRP stable build which will have a BF-F8HP model selection.
Jim KC9HI
On Thu, Feb 26, 2015 at 2:20 PM, Larry Lindsay larrylindsay0@gmail.com wrote:
I am using UV 5R for the. G U. I. Down load is fine. But cannot upload to radio I get error code. Unsupported firmware version. N 5 R 3403f8HP 1. XX Lost again. Thanks for all support Larry. n6nev.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
I used the daily build and my BF-F8HP was listed. All seems to work fine on Mac OS X 10.10
David Kickbusch
On Feb 26, 2015, at 11:29 AM, Jim Unroe rock.unroe@gmail.com wrote:
Larry,
This is because you are using the CHIRP stable build and it does not support the radios with 3 power levels. You must use a CHIRP stable build which will have a BF-F8HP model selection.
Jim KC9HI
On Thu, Feb 26, 2015 at 2:20 PM, Larry Lindsay larrylindsay0@gmail.com wrote:
I am using UV 5R for the. G U. I. Down load is fine. But cannot upload to radio I get error code. Unsupported firmware version. N 5 R 3403f8HP 1. XX Lost again. Thanks for all support Larry. n6nev.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Good news. How do I find the chirp stable build for bf f8hp model selection? Thanks again. Larry n6nev
On Thursday, February 26, 2015, David Kickbusch david@easleadership.com wrote:
I used the daily build and my BF-F8HP was listed. All seems to work fine on Mac OS X 10.10
David Kickbusch
On Feb 26, 2015, at 11:29 AM, Jim Unroe <rock.unroe@gmail.com
javascript:;> wrote:
Larry,
This is because you are using the CHIRP stable build and it does not support the radios with 3 power levels. You must use a CHIRP stable build which will have a BF-F8HP model selection.
Jim KC9HI
On Thu, Feb 26, 2015 at 2:20 PM, Larry Lindsay <larrylindsay0@gmail.com
javascript:;> wrote:
I am using UV 5R for the. G U. I. Down load is fine. But cannot
upload
to radio I get error code. Unsupported firmware version. N 5 R 3403f8HP 1. XX Lost again. Thanks for all support Larry. n6nev.
chirp_users mailing list chirp_users@intrepid.danplanet.com javascript:; http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com javascript:;
chirp_users mailing list chirp_users@intrepid.danplanet.com javascript:; http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com javascript:;
chirp_users mailing list chirp_users@intrepid.danplanet.com javascript:; http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com javascript:;
Jim,
Larry, N6NEV is understandably confused. People refer him back to you message (below) in which you made an error.
You meant to tell him he needs a DAILY build, but you told him in error he needed the stable build.
Larry, Jim typed the wrong thing, you need the latest daily build.
David N1EA On Feb 26, 2015 2:30 PM, "Jim Unroe" rock.unroe@gmail.com wrote:
Larry,
This is because you are using the CHIRP stable build and it does not support the radios with 3 power levels. You must use a CHIRP stable build which will have a BF-F8HP model selection.
Jim KC9HI
On Thu, Feb 26, 2015 at 2:20 PM, Larry Lindsay larrylindsay0@gmail.com wrote:
I am using UV 5R for the. G U. I. Down load is fine. But cannot
upload
to radio I get error code. Unsupported firmware version. N 5 R 3403f8HP 1. XX Lost again. Thanks for all support Larry. n6nev.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
David is absolutely right. I was thinking "you must use a daily build" but my fingers typed the opposite.
Nobody with a Baofeng radio should be using the stable build. There has been too many new model additions, firmware changes and no protection against uploading incompatible radio image files.
Sorry for the confusion.
Jim KC9HI
On Thu, Feb 26, 2015 at 9:19 PM, D.J.J. Ring, Jr. n1ea@arrl.net wrote:
Jim,
Larry, N6NEV is understandably confused. People refer him back to you message (below) in which you made an error.
You meant to tell him he needs a DAILY build, but you told him in error he needed the stable build.
Larry, Jim typed the wrong thing, you need the latest daily build.
David N1EA
On Feb 26, 2015 2:30 PM, "Jim Unroe" rock.unroe@gmail.com wrote:
Larry,
This is because you are using the CHIRP stable build and it does not support the radios with 3 power levels. You must use a CHIRP stable build which will have a BF-F8HP model selection.
Jim KC9HI
Fella’s (ladies as well?), in an effort of full disclosure, I want to make sure everyone knows I am in no way a computer programmer; I joined hoping this list was a “help” based list. If I joined a list of programmers then I made a mistake and apologize for clogging your air waves! If this list does exist for the layman as well, then I’m in the right spot!
I have a 4 UV-82’s with the large Nagoya, I also just picked up a BF-F9V2+ Tri power without checking CHIRP for support before hand (spurious keyboard/Amazon emissions on my part). I took a chance and used BF-F8HP on the drop down and was able to connect. I have found much misinformation on the web about this radio being “counterfeit/copy” of the BF-8HP but I was able to find it on the Chinese Baofeng website. Is this thing legit or not? Am I doing any harm telling CHIRP its a BF-8HP when its actually a BF-F9V2+?? Will there be/is there need for a specific version?
Sorry for my ignorance! I just got my Tech license day before yesterday, KG7RKJ Las Vegas, 73!
On Feb 26, 2015, at 6:58 PM, Jim Unroe rock.unroe@gmail.com wrote:
David is absolutely right. I was thinking "you must use a daily build" but my fingers typed the opposite.
Nobody with a Baofeng radio should be using the stable build. There has been too many new model additions, firmware changes and no protection against uploading incompatible radio image files.
Sorry for the confusion.
Jim KC9HI
On Thu, Feb 26, 2015 at 9:19 PM, D.J.J. Ring, Jr. n1ea@arrl.net wrote:
Jim,
Larry, N6NEV is understandably confused. People refer him back to you message (below) in which you made an error.
You meant to tell him he needs a DAILY build, but you told him in error he needed the stable build.
Larry, Jim typed the wrong thing, you need the latest daily build.
David N1EA
On Feb 26, 2015 2:30 PM, "Jim Unroe" rock.unroe@gmail.com wrote:
Larry,
This is because you are using the CHIRP stable build and it does not support the radios with 3 power levels. You must use a CHIRP stable build which will have a BF-F8HP model selection.
Jim KC9HI
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Justin, You are correct. To program a F9V2+, use the BF- F8HP selection.
John http://www.miklor.com/F8HP
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Justin Sent: Friday, February 27, 2015 6:05 PM To: Discussion of CHIRP Subject: Re: [chirp_users] BFf8hP
Fella’s (ladies as well?), in an effort of full disclosure, I want to make sure everyone knows I am in no way a computer programmer; I joined hoping this list was a “help” based list. If I joined a list of programmers then I made a mistake and apologize for clogging your air waves! If this list does exist for the layman as well, then I’m in the right spot!
I have a 4 UV-82’s with the large Nagoya, I also just picked up a BF-F9V2+ Tri power without checking CHIRP for support before hand (spurious keyboard/Amazon emissions on my part). I took a chance and used BF-F8HP on the drop down and was able to connect. I have found much misinformation on the web about this radio being “counterfeit/copy” of the BF-8HP but I was able to find it on the Chinese Baofeng website. Is this thing legit or not? Am I doing any harm telling CHIRP its a BF-8HP when its actually a BF-F9V2+?? Will there be/is there need for a specific version?
Sorry for my ignorance! I just got my Tech license day before yesterday, KG7RKJ Las Vegas, 73!
On Feb 26, 2015, at 6:58 PM, Jim Unroe rock.unroe@gmail.com wrote:
David is absolutely right. I was thinking "you must use a daily build" but my fingers typed the opposite.
Nobody with a Baofeng radio should be using the stable build. There has been too many new model additions, firmware changes and no protection against uploading incompatible radio image files.
Sorry for the confusion.
Jim KC9HI
On Thu, Feb 26, 2015 at 9:19 PM, D.J.J. Ring, Jr. n1ea@arrl.net wrote:
Jim,
Larry, N6NEV is understandably confused. People refer him back to you message (below) in which you made an error.
You meant to tell him he needs a DAILY build, but you told him in error he needed the stable build.
Larry, Jim typed the wrong thing, you need the latest daily build.
David N1EA
On Feb 26, 2015 2:30 PM, "Jim Unroe" rock.unroe@gmail.com wrote:
Larry,
This is because you are using the CHIRP stable build and it does not support the radios with 3 power levels. You must use a CHIRP stable build which will have a BF-F8HP model selection.
Jim KC9HI
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
----- No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5751 / Virus Database: 4299/9193 - Release Date: 02/27/15
Hi Justin,
First, congratulations on getting your Technician license.
Now for your question. If you take a look at the Supported Radios list on the CHIRP you will see
BF-F8HP (in daily builds) Also includes the BF-F9V2+ Also includes the GT-3TP Also includes the UV-5R TP
So all of these Baofeng radios with 3 power levels are basically the same and they all are programmed by selecting the BF-F8HP model.
Jim KC9HI
On Fri, Feb 27, 2015 at 6:05 PM, Justin 700hpvette1@cox.net wrote:
Fella’s (ladies as well?), in an effort of full disclosure, I want to make sure everyone knows I am in no way a computer programmer; I joined hoping this list was a “help” based list. If I joined a list of programmers then I made a mistake and apologize for clogging your air waves! If this list does exist for the layman as well, then I’m in the right spot!
I have a 4 UV-82’s with the large Nagoya, I also just picked up a BF-F9V2+ Tri power without checking CHIRP for support before hand (spurious keyboard/Amazon emissions on my part). I took a chance and used BF-F8HP on the drop down and was able to connect. I have found much misinformation on the web about this radio being “counterfeit/copy” of the BF-8HP but I was able to find it on the Chinese Baofeng website. Is this thing legit or not? Am I doing any harm telling CHIRP its a BF-8HP when its actually a BF-F9V2+?? Will there be/is there need for a specific version?
Sorry for my ignorance! I just got my Tech license day before yesterday, KG7RKJ Las Vegas, 73!
On Feb 26, 2015, at 6:58 PM, Jim Unroe rock.unroe@gmail.com wrote:
David is absolutely right. I was thinking "you must use a daily build" but my fingers typed the opposite.
Nobody with a Baofeng radio should be using the stable build. There has been too many new model additions, firmware changes and no protection against uploading incompatible radio image files.
Sorry for the confusion.
Jim KC9HI
On Thu, Feb 26, 2015 at 9:19 PM, D.J.J. Ring, Jr. n1ea@arrl.net wrote:
Jim,
Larry, N6NEV is understandably confused. People refer him back to you message (below) in which you made an error.
You meant to tell him he needs a DAILY build, but you told him in error he needed the stable build.
Larry, Jim typed the wrong thing, you need the latest daily build.
David N1EA
On Feb 26, 2015 2:30 PM, "Jim Unroe" rock.unroe@gmail.com wrote:
Larry,
This is because you are using the CHIRP stable build and it does not support the radios with 3 power levels. You must use a CHIRP stable build which will have a BF-F8HP model selection.
Jim KC9HI
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (6)
-
D.J.J. Ring, Jr. -
David Kickbusch -
Jim Unroe -
John LaMartina -
Justin -
Larry Lindsay