I programmed my kg-uv3d using chirp a couple years ago
Current version Chirp does not list KG-UV3D, tried all listed under Wouxun but none worked.
Is there a earlier chirp version that lists KG-UV3D?
Thanks,
Jack
W4GRJ
--- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
The CHIRP home page shows this info under "Supported Radio Models":
Wouxun
- KG-UVD1P/UV2D/UV3D - KG-UV6D/UV6X - KG-UV8D - KG-UV8D Plus - KG-816/818
In the CHIRP program, the"Download From Radio" dialog has an option under Vendor "Wouxun" for Model "KG-UVD1P".� It appears that option should also work for the KG-UV3D.� See line 60 or thereabouts in what appears to be the latest version of wouxun.py, from the CHIRP Repository, here:
https://chirp.danplanet.com/projects/chirp/repository/changes/chirp/drivers/...
https://chirp.danplanet.com/projects/chirp/repository/revisions/919242a3a1d8...
60��� """Wouxun KG-UVD1P,UV2,UV3"""
I'm guessing there is only so much space available in the pull-down menus of that dialog?
(Peter)
On 10/23/2018 4:33 AM, w4grj wrote:
I programmed my kg-uv3d using chirp a couple years ago
Current version Chirp does not list KG-UV3D, tried all listed under Wouxun but none worked.
Is there a earlier chirp version that lists KG-UV3D?
Thanks,
Jack
W4GRJ
https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon Virus-free. www.avast.com https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to (Peter) at ptlambert@sbcglobal.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Apologies for the formatting on that last reply. Thunderbird was defaulting to Western encoding, which was apparently not playing well with the list software. I've switched to Unicode and cleaned up the extraneous "�" characters below. If they show up again then I will just leave well enough alone...
On 10/23/2018 11:36 AM, Peter wrote:
The CHIRP home page shows this info under "Supported Radio Models":
Wouxun
- KG-UVD1P/UV2D/UV3D
- KG-UV6D/UV6X
- KG-UV8D
- KG-UV8D Plus
- KG-816/818
In the CHIRP program, the"Download From Radio" dialog has an option under Vendor "Wouxun" for Model "KG-UVD1P". It appears that option should also work for the KG-UV3D. See line 60 or thereabouts in what appears to be the latest version of wouxun.py, from the CHIRP Repository, here:
https://chirp.danplanet.com/projects/chirp/repository/changes/chirp/drivers/...
https://chirp.danplanet.com/projects/chirp/repository/revisions/919242a3a1d8...
60 """Wouxun KG-UVD1P,UV2,UV3"""
I'm guessing there is only so much space available in the pull-down menus of that dialog?
(Peter)
Peter, Thank you Jack W4GRJ
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Peter Sent: Tuesday, October 23, 2018 2:52 PM To: chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] Wouxun KG-UV3D
Apologies for the formatting on that last reply. Thunderbird was defaulting to Western encoding, which was apparently not playing well with the list software. I've switched to Unicode and cleaned up the extraneous "�" characters below. If they show up again then I will just leave well enough alone...
On 10/23/2018 11:36 AM, Peter wrote:
The CHIRP home page shows this info under "Supported Radio Models":
Wouxun
- KG-UVD1P/UV2D/UV3D
- KG-UV6D/UV6X
- KG-UV8D
- KG-UV8D Plus
- KG-816/818
In the CHIRP program, the"Download From Radio" dialog has an option under Vendor "Wouxun" for Model "KG-UVD1P". It appears that option should also work for the KG-UV3D. See line 60 or thereabouts in what appears to be the latest version of wouxun.py, from the CHIRP Repository, here:
https://chirp.danplanet.com/projects/chirp/repository/changes/chirp/drivers/...
https://chirp.danplanet.com/projects/chirp/repository/revisions/919242a3a1d8...
60 """Wouxun KG-UVD1P,UV2,UV3"""
I'm guessing there is only so much space available in the pull-down menus of that dialog?
(Peter)
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jack at w4grj@satterfield.org To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
--- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
Hi to all. Chirp developer here.
Chirp introduced a development concept a while ago entitled "Aliasing or radio clones" (search for it on the wiki) that is the perfect fit for that, this was introduced while the baofeng clones spring...
This problem is the perfect fit for that solution.... a few physical radios that behave as just one radio from the programming perspective (chirp's perspective), as users we can say that all them are "clones" of one "original" radio.
I will try to fix that oddity when I have some free time (buried with work now)
Cheers, Pavel CO7WT.
El 23/10/18 a las 14:36, Peter escribió:
I'm guessing there is only so much space available in the pull-down menus of that dialog?
I'm starting to work on this issue.
Please take a peek on the issue to help on fixing it.
https://chirp.danplanet.com/issues/6185
Cheers, Pavel CO7WT.
El 23/10/18 a las 14:36, Peter escribió:
The CHIRP home page shows this info under "Supported Radio Models":
Wouxun
- KG-UVD1P/UV2D/UV3D
- KG-UV6D/UV6X
- KG-UV8D
- KG-UV8D Plus
- KG-816/818
In the CHIRP program, the"Download From Radio" dialog has an option under Vendor "Wouxun" for Model "KG-UVD1P".� It appears that option should also work for the KG-UV3D.� See line 60 or thereabouts in what appears to be the latest version of wouxun.py, from the CHIRP Repository, here:
https://chirp.danplanet.com/projects/chirp/repository/changes/chirp/drivers/...
https://chirp.danplanet.com/projects/chirp/repository/revisions/919242a3a1d8...
60��� """Wouxun KG-UVD1P,UV2,UV3"""
I'm guessing there is only so much space available in the pull-down menus of that dialog?
(Peter)
On 10/23/2018 4:33 AM, w4grj wrote:
I programmed my kg-uv3d using chirp a couple years ago
Current version Chirp does not list KG-UV3D, tried all listed under Wouxun but none worked.
Is there a earlier chirp version that lists KG-UV3D?
Thanks,
Jack
W4GRJ
https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon Virus-free. www.avast.com https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to (Peter) at ptlambert@sbcglobal.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to M.Sc. Pavel Milanes Costa at pavelmc@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (3)
-
Pavel Milanes Costa -
Peter -
w4grj