Greetings again CHIRP'rs I now have a Yaesu FT2900 that I would like to program with CHIRP. I have a Prolific cable and found the 'pin out' on the mike socket ( #4 GRD - #6 CLONE)
I go through the sequence to get the radio into 'CLONE' mode and then to 'TX' but the response I get from CHIRP is "The radio is not responding" and "ERROR" on the radio LCD readout.
Any offers?
73's Eric
Roll your cable driver back to 3.2.0.9.
Jardy Dawson WA7JRD Message sent through sub space hailing frequencies using the Universal Translator.
On Apr 26, 2017, at 21:55, Eric Chopin echopin27@gmail.com wrote:
Greetings again CHIRP'rs I now have a Yaesu FT2900 that I would like to program with CHIRP. I have a Prolific cable and found the 'pin out' on the mike socket ( #4 GRD - #6 CLONE)
I go through the sequence to get the radio into 'CLONE' mode and then to 'TX' but the response I get from CHIRP is "The radio is not responding" and "ERROR" on the radio LCD readout.
Any offers?
73's Eric _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Should be 3.2.0.0. Fat fingers on an Apple iPhone.
Jardy Dawson WA7JRD Message sent through sub space hailing frequencies using the Universal Translator.
On Apr 26, 2017, at 22:27, Jardy via chirp_users chirp_users@intrepid.danplanet.com wrote:
Roll your cable driver back to 3.2.0.9.
Jardy Dawson WA7JRD Message sent through sub space hailing frequencies using the Universal Translator.
On Apr 26, 2017, at 21:55, Eric Chopin echopin27@gmail.com wrote:
Greetings again CHIRP'rs I now have a Yaesu FT2900 that I would like to program with CHIRP. I have a Prolific cable and found the 'pin out' on the mike socket ( #4 GRD - #6 CLONE)
I go through the sequence to get the radio into 'CLONE' mode and then to 'TX' but the response I get from CHIRP is "The radio is not responding" and "ERROR" on the radio LCD readout.
Any offers?
73's Eric _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (2)
-
Eric Chopin -
Jardy