[chirp_users] transmit inhibit setting?
I have a GT-3. In reading a post or an article, someone said Chirp can inhibit a channel to make the radio like a scanner. Where is that setting???
mike mccrann, wd0gsy tmmccrann@aol.com
Hi, I read that if you set the duplex setting to none or off. This will deactivate the ptt for that channel. This how I do it on baofeng uv 82! Not sure if it is the same , but you can try it anyway
Scott D , VA5EMS
On Jan 20, 2015, at 10:01 AM, Tmmccrann@aol.com wrote:
I have a GT-3. In reading a post or an article, someone said Chirp can inhibit a channel to make the radio like a scanner. Where is that setting???
mike mccrann, wd0gsy tmmccrann@aol.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
The right column is labeled SKIP. Select S and that channel will be skipped in scan mode.
John http://www.miklor.com/UV5R
Sent from my iPhone
On Jan 20, 2015, at 11:01 AM, Tmmccrann@aol.com wrote:
I have a GT-3. In reading a post or an article, someone said Chirp can inhibit a channel to make the radio like a scanner. Where is that setting???
mike mccrann, wd0gsy tmmccrann@aol.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
participants (3)
-
John LaMartina -
Scott Dudley -
Tmmccrann＠aol.com