[chirp_users] Help with Programming Rugged Radios RM-60
searched the site and scoured google, but came up with nothing. Apologies in advance for my lack of knowledge
Equipment: Windows 10 64bit Prolific USB to 3.5mm Cable running 3.2.0.0 Driver (as instructed by MIKLOR), correct identified port Rugged Radios RM60
Issue: Need to Program Radio with Chirp. Radio is not listed on Chirp site. I tried selecting other radios such as TYT or QYT as others had used, but software will say 'Radio did not enter clone mode' or radio not recognized, or something along those lines.
What am I missing? wrong cable/driver? incorrect radio being selected in Chirp? setting on radio? Do i have to use RT system's software and/or cable?
Thanks for any help you can provide.
Luis
Your radio is not on the supported makes/models list. You may be able to get software from the seller.
On Wed, Mar 17, 2021 at 2:49 AM Luis Tiscareno jayspinnin@gmail.com wrote:
searched the site and scoured google, but came up with nothing. Apologies in advance for my lack of knowledge
Equipment: Windows 10 64bit Prolific USB to 3.5mm Cable running 3.2.0.0 Driver (as instructed by MIKLOR), correct identified port Rugged Radios RM60
Issue: Need to Program Radio with Chirp. Radio is not listed on Chirp site. I tried selecting other radios such as TYT or QYT as others had used, but software will say 'Radio did not enter clone mode' or radio not recognized, or something along those lines.
What am I missing? wrong cable/driver? incorrect radio being selected in Chirp? setting on radio? Do i have to use RT system's software and/or cable?
Thanks for any help you can provide.
Luis
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Wuest at jhwuest@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Rugged doesn't seem to list an RM-60 on their website. What other radio does it LOOK like. It's obviously a something that's been rebadged.
On 17/03/2021 02:48 Luis Tiscareno <jayspinnin@gmail.com> wrote: searched the site and scoured google, but came up with nothing. Apologies in advance for my lack of knowledge Equipment: Windows 10 64bit Prolific USB to 3.5mm Cable running 3.2.0.0 Driver (as instructed by MIKLOR), correct identified port Rugged Radios RM60 Issue: Need to Program Radio with Chirp. Radio is not listed on Chirp site. I tried selecting other radios such as TYT or QYT as others had used, but software will say 'Radio did not enter clone mode' or radio not recognized, or something along those lines. What am I missing? wrong cable/driver? incorrect radio being selected in Chirp? setting on radio? Do i have to use RT system's software and/or cable? Thanks for any help you can provide. Luis _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net
participants (3)
-
John Wuest -
Luis Tiscareno -
Nigel A. Gunn G8IFF/W8IFF