Read the following and execute: To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com

On Tue, Aug 22, 2017 at 10:33 PM, Ray Harbeck kg7rau@hotmail.com wrote:

Remove Me from this subscription

Sent from Yahoo Mail on Android https://overview.mail.yahoo.com/mobile/?.src=Android

On Tue, Aug 22, 2017 at 19:48, kg5ubq@gmail.com kg5ubq@gmail.com wrote:

*Looking for Chirp for Retevis RT82, however I am unable to locate. Has any of worked through that or are you aware of similar radio chirp that may work?*

*KG5UBQ** Dan*

Daniel Smitley

KG5UBQ@gmail.com

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ray at kg7rau@hotmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck Hast at kp4djt@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com

Sure wish it did but what it does it does very WELL. If I could code (at that level) I would take a poke at it but that is scary.

On Wed, Aug 23, 2017 at 4:47 AM, Jim Unroe rock.unroe@gmail.com wrote:

On Tue, Aug 22, 2017 at 9:48 PM, kg5ubq@gmail.com wrote:

...

Looking for Chirp for Retevis RT82, however I am unable to locate. Has

any

...

of worked through that or are you aware of similar radio chirp that may work?

To the best of my knowledge, CHIRP does not support any DMR radios.

Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck Hast at kp4djt@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com

On Tue, Aug 29, 2017 at 12:32 PM, kg5ubq@gmail.com wrote:

If Chirp does not support DMR such as Retevis RT82, do you know who might.? I tried RT Systems with no success. I cannot even find a link to contact them.

KG5UBQ

Dan

I would suggest the RT82 programming software from the Retevis website.

http://www.retevis.com/resources-center/

Jim KC9HI