[chirp_users] USB-3
Wondering if I am the only one having trouble getting Chirp to work with my new laptop. It is an i7 running win 7 pro and using USB-3 rather than USB-2. Device mgr tells me the correct driver is there and its ready to go. When I try to read from the radio, it always tells me there is an error and cant read/find the files. When I fire up the older Vista machine the programming works fine using the same cable and radio. So in short I am starting to think there is a compatibility issue when using USB-3. Anyone else with this issue???
*Jim S*
Jim -
What radio are you trying to program?
-Daniel
On Fri, Jun 5, 2015 at 1:59 PM, JS de.ka7ara@gmail.com wrote:
Wondering if I am the only one having trouble getting Chirp to work with my new laptop. It is an i7 running win 7 pro and using USB-3 rather than USB-2. Device mgr tells me the correct driver is there and its ready to go. When I try to read from the radio, it always tells me there is an error and cant read/find the files. When I fire up the older Vista machine the programming works fine using the same cable and radio. So in short I am starting to think there is a compatibility issue when using USB-3. Anyone else with this issue???
*Jim S*
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Tried three rigs, two baofeng UV-5R and a Wouxun KG-UV3D. As I said they program just fine when using a PC running VISTA and USB 2's. Problem only occurs on the new Laptop running Win 7Pro and USB-3's.
*Jim S* *KA7ARA *
On Fri, Jun 5, 2015 at 2:13 PM, Daniel Lichterman dlichterman@gmail.com wrote:
Jim -
What radio are you trying to program?
-Daniel
On Fri, Jun 5, 2015 at 1:59 PM, JS de.ka7ara@gmail.com wrote:
Wondering if I am the only one having trouble getting Chirp to work with my new laptop. It is an i7 running win 7 pro and using USB-3 rather than USB-2. Device mgr tells me the correct driver is there and its ready to go. When I try to read from the radio, it always tells me there is an error and cant read/find the files. When I fire up the older Vista machine the programming works fine using the same cable and radio. So in short I am starting to think there is a compatibility issue when using USB-3. Anyone else with this issue???
*Jim S*
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
--
Daniel Lichterman
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Jim -
What drivers did you use for the cable? Have you tried the ones on the miklor website?
http://www.miklor.com/COM/UV_Drivers.php
-Daniel
On Fri, Jun 5, 2015 at 8:09 PM, JS de.ka7ara@gmail.com wrote:
Tried three rigs, two baofeng UV-5R and a Wouxun KG-UV3D. As I said they program just fine when using a PC running VISTA and USB 2's. Problem only occurs on the new Laptop running Win 7Pro and USB-3's.
*Jim S* *KA7ARA *
On Fri, Jun 5, 2015 at 2:13 PM, Daniel Lichterman dlichterman@gmail.com wrote:
Jim -
What radio are you trying to program?
-Daniel
On Fri, Jun 5, 2015 at 1:59 PM, JS de.ka7ara@gmail.com wrote:
Wondering if I am the only one having trouble getting Chirp to work with my new laptop. It is an i7 running win 7 pro and using USB-3 rather than USB-2. Device mgr tells me the correct driver is there and its ready to go. When I try to read from the radio, it always tells me there is an error and cant read/find the files. When I fire up the older Vista machine the programming works fine using the same cable and radio. So in short I am starting to think there is a compatibility issue when using USB-3. Anyone else with this issue???
*Jim S*
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
--
Daniel Lichterman
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Cant remember the numbers but seems like it was 3.2.0 or similar, anyway its the one that is recommended for my 64 bit system and got it from the Miklor site. Guess I'll keep poking around.
Thanks for the reply's Daniel.. A fine name, same as my older brother....
*Jim S* *KA7ARA *
On Fri, Jun 5, 2015 at 8:12 PM, Daniel Lichterman dlichterman@gmail.com wrote:
Jim -
What drivers did you use for the cable? Have you tried the ones on the miklor website?
http://www.miklor.com/COM/UV_Drivers.php
-Daniel
On Fri, Jun 5, 2015 at 8:09 PM, JS de.ka7ara@gmail.com wrote:
Tried three rigs, two baofeng UV-5R and a Wouxun KG-UV3D. As I said they program just fine when using a PC running VISTA and USB 2's. Problem only occurs on the new Laptop running Win 7Pro and USB-3's.
*Jim S* *KA7ARA *
On Fri, Jun 5, 2015 at 2:13 PM, Daniel Lichterman dlichterman@gmail.com wrote:
Jim -
What radio are you trying to program?
-Daniel
On Fri, Jun 5, 2015 at 1:59 PM, JS de.ka7ara@gmail.com wrote:
Wondering if I am the only one having trouble getting Chirp to work with my new laptop. It is an i7 running win 7 pro and using USB-3 rather than USB-2. Device mgr tells me the correct driver is there and its ready to go. When I try to read from the radio, it always tells me there is an error and cant read/find the files. When I fire up the older Vista machine the programming works fine using the same cable and radio. So in short I am starting to think there is a compatibility issue when using USB-3. Anyone else with this issue???
*Jim S*
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
--
Daniel Lichterman
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
--
Daniel Lichterman
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Roll back the driver to 3.2.0.0 if it is a Prolific cable.
Jardy Dawson WA7JRD Nobody really cares what device you are using, as long as YOU like it!
On Jun 5, 2015, at 20:09, JS de.ka7ara@gmail.com wrote:
Tried three rigs, two baofeng UV-5R and a Wouxun KG-UV3D. As I said they program just fine when using a PC running VISTA and USB 2's. Problem only occurs on the new Laptop running Win 7Pro and USB-3's.
Jim S KA7ARAOn Fri, Jun 5, 2015 at 2:13 PM, Daniel Lichterman dlichterman@gmail.com wrote: Jim -
What radio are you trying to program?
-Daniel
On Fri, Jun 5, 2015 at 1:59 PM, JS de.ka7ara@gmail.com wrote: Wondering if I am the only one having trouble getting Chirp to work with my new laptop. It is an i7 running win 7 pro and using USB-3 rather than USB-2. Device mgr tells me the correct driver is there and its ready to go. When I try to read from the radio, it always tells me there is an error and cant read/find the files. When I fire up the older Vista machine the programming works fine using the same cable and radio. So in short I am starting to think there is a compatibility issue when using USB-3. Anyone else with this issue???
Jim S
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
--
Daniel Lichterman
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Hi list,
Just finished programming a batch of UV5R N5R2045 and -1 -7 All working fine.
Using Chirp Daily 20150513: download UV5R radio image deleted existing frequencies imported same freq list used on above batch no errors at all reported all seemed OK with import and upload
Unit transmits ok, RX indicator blue background lite works ok, when there is carrier or when hitting the monitor switch, just no audio. Tried set of headphones in rec jack -- still no audio.
Tried the same with Daily 20150530, no errors, no change.
did keyboard reset, no errors, no change.
Any possible setting that could cause this, or DOA audio output?
tnx es 73 de Bill WB2SXY --
On Fri, Jun 5, 2015 at 5:51 PM, Bill Kasper williamkasper@frontiernet.net wrote:
Hi list,
Just finished programming a batch of UV5R N5R2045 and -1 -7 All working fine.
I assume that you mean N5R2401, N5R2405 and N5R2407.
Using Chirp Daily 20150513: download UV5R radio image deleted existing frequencies imported same freq list used on above batch no errors at all reported all seemed OK with import and upload
OK
Unit transmits ok, RX indicator blue background lite works ok, when there is carrier or when hitting the monitor switch, just no audio. Tried set of headphones in rec jack -- still no audio.
You said all working fine above. "Unit"? Which unit? All of them? I'm confused?
Tried the same with Daily 20150530, no errors, no change.
did keyboard reset, no errors, no change.
Any possible setting that could cause this, or DOA audio output?
tnx es 73 de Bill WB2SXY
I has someone send me a "factory" image from a radio with N5R firmware within the last couple of days that appeared to have been cross-loaded with BFB firmware at the factory. That would cause a radio not to receive.
How about attaching your original downloaded image files?
Jim KC9HI
Hi Jim et al,
Thanks for the info, I sent more info, In the meantime, if someone has a known good HN5RV01 image could you please send it to me --
tnx es 73 de Bill WB2SXY
--
On 6/5/2015 6:22 PM, Jim Unroe wrote:
On Fri, Jun 5, 2015 at 5:51 PM, Bill Kasper williamkasper@frontiernet.net wrote:
Hi list,
Just finished programming a batch of UV5R N5R2045 and -1 -7 All working fine.
I assume that you mean N5R2401, N5R2405 and N5R2407.
Using Chirp Daily 20150513: download UV5R radio image deleted existing frequencies imported same freq list used on above batch no errors at all reported all seemed OK with import and upload
OK
Unit transmits ok, RX indicator blue background lite works ok, when there is carrier or when hitting the monitor switch, just no audio. Tried set of headphones in rec jack -- still no audio.
You said all working fine above. "Unit"? Which unit? All of them? I'm confused?
Tried the same with Daily 20150530, no errors, no change.
did keyboard reset, no errors, no change.
Any possible setting that could cause this, or DOA audio output?
tnx es 73 de Bill WB2SXY
I has someone send me a "factory" image from a radio with N5R firmware within the last couple of days that appeared to have been cross-loaded with BFB firmware at the factory. That would cause a radio not to receive.
How about attaching your original downloaded image files?
Jim KC9HI _______________________________________________
Hi Bill, For the fun of it, try this and report back. Jim KC9HI
On Fri, Jun 5, 2015 at 9:52 PM, Bill Kasper williamkasper@frontiernet.net wrote:
Hi Jim et al,
Thanks for the info, I sent more info, In the meantime, if someone has a known good HN5RV01 image could you please send it to me --
tnx es 73 de Bill WB2SXY
--
On 6/5/2015 6:22 PM, Jim Unroe wrote:
On Fri, Jun 5, 2015 at 5:51 PM, Bill Kasper williamkasper@frontiernet.net wrote:
Hi list,
Just finished programming a batch of UV5R N5R2045 and -1 -7 All working fine.
I assume that you mean N5R2401, N5R2405 and N5R2407.
Using Chirp Daily 20150513: download UV5R radio image deleted existing frequencies imported same freq list used on above batch no errors at all reported all seemed OK with import and upload
OK
Unit transmits ok, RX indicator blue background lite works ok, when there is carrier or when hitting the monitor switch, just no audio. Tried set of headphones in rec jack -- still no audio.
You said all working fine above. "Unit"? Which unit? All of them? I'm confused?
Tried the same with Daily 20150530, no errors, no change.
did keyboard reset, no errors, no change.
Any possible setting that could cause this, or DOA audio output?
tnx es 73 de Bill WB2SXY
I has someone send me a "factory" image from a radio with N5R firmware within the last couple of days that appeared to have been cross-loaded with BFB firmware at the factory. That would cause a radio not to receive.
How about attaching your original downloaded image files?
Jim KC9HI _______________________________________________
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Hi Jim,
No change, Thanks for the test, Tried on 146.52, TX audio still good on another radio, no POST audio nor RX on the HN5R unit :-(
tnx
On 6/5/2015 10:10 PM, Jim Unroe wrote:
Hi Bill, For the fun of it, try this and report back. Jim KC9HI
On Fri, Jun 5, 2015 at 9:52 PM, Bill Kasper williamkasper@frontiernet.net wrote:
Hi Jim et al,
Thanks for the info, I sent more info, In the meantime, if someone has a known good HN5RV01 image could you please send it to me --
tnx es 73 de Bill WB2SXY
--
On 6/5/2015 6:22 PM, Jim Unroe wrote:
On Fri, Jun 5, 2015 at 5:51 PM, Bill Kasper williamkasper@frontiernet.net wrote:
Hi list,
Just finished programming a batch of UV5R N5R2045 and -1 -7 All working fine.
I assume that you mean N5R2401, N5R2405 and N5R2407.
Using Chirp Daily 20150513: download UV5R radio image deleted existing frequencies imported same freq list used on above batch no errors at all reported all seemed OK with import and upload
OK
Unit transmits ok, RX indicator blue background lite works ok, when there is carrier or when hitting the monitor switch, just no audio. Tried set of headphones in rec jack -- still no audio.
You said all working fine above. "Unit"? Which unit? All of them? I'm confused?
Tried the same with Daily 20150530, no errors, no change.
did keyboard reset, no errors, no change.
Any possible setting that could cause this, or DOA audio output?
tnx es 73 de Bill WB2SXY
I has someone send me a "factory" image from a radio with N5R firmware within the last couple of days that appeared to have been cross-loaded with BFB firmware at the factory. That would cause a radio not to receive.
How about attaching your original downloaded image files?
Jim KC9HI _______________________________________________
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
The HN5RV01 also has a 150126N identifier No change, Thanks for the test, Tried on 146.52, TX audio still good as received on another radio, no POST audio nor RX on the HN5R unit :-(
tnx Bill WB2SXY
On 6/5/2015 10:10 PM, Jim Unroe wrote:
Hi Bill, For the fun of it, try this and report back. Jim KC9HI
On Fri, Jun 5, 2015 at 9:52 PM, Bill Kasper williamkasper@frontiernet.net wrote:
Hi Jim et al,
Thanks for the info, I sent more info, In the meantime, if someone has a known good HN5RV01 image could you please send it to me --
tnx es 73 de Bill WB2SXY
--
On 6/5/2015 6:22 PM, Jim Unroe wrote:
On Fri, Jun 5, 2015 at 5:51 PM, Bill Kasper williamkasper@frontiernet.net wrote:
Hi list,
Just finished programming a batch of UV5R N5R2045 and -1 -7 All working fine.
I assume that you mean N5R2401, N5R2405 and N5R2407.
Using Chirp Daily 20150513: download UV5R radio image deleted existing frequencies imported same freq list used on above batch no errors at all reported all seemed OK with import and upload
OK
Unit transmits ok, RX indicator blue background lite works ok, when there is carrier or when hitting the monitor switch, just no audio. Tried set of headphones in rec jack -- still no audio.
You said all working fine above. "Unit"? Which unit? All of them? I'm confused?
Tried the same with Daily 20150530, no errors, no change.
did keyboard reset, no errors, no change.
Any possible setting that could cause this, or DOA audio output?
tnx es 73 de Bill WB2SXY
I has someone send me a "factory" image from a radio with N5R firmware within the last couple of days that appeared to have been cross-loaded with BFB firmware at the factory. That would cause a radio not to receive.
How about attaching your original downloaded image files?
Jim KC9HI _______________________________________________
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Let the HN5R set in the charger for an hour, then activated the 'hold zero' for several seconds to display the battery voltage. Audio Started working, Power On Self Test and receiving Audio OK now. go figure ???
tnx es 73 de Bill WB2SXY
--
On 6/5/2015 10:35 PM, Bill Kasper wrote:
The HN5RV01 also has a 150126N identifier No change, Thanks for the test, Tried on 146.52, TX audio still good as received on another radio, no POST audio nor RX on the HN5R unit :-(
tnx Bill WB2SXY
On 6/5/2015 10:10 PM, Jim Unroe wrote:
Hi Bill, For the fun of it, try this and report back. Jim KC9HI
On Fri, Jun 5, 2015 at 9:52 PM, Bill Kasper williamkasper@frontiernet.net wrote:
Hi Jim et al,
Thanks for the info, I sent more info, In the meantime, if someone has a known good HN5RV01 image could you please send it to me --
tnx es 73 de Bill WB2SXY
--
On 6/5/2015 6:22 PM, Jim Unroe wrote:
On Fri, Jun 5, 2015 at 5:51 PM, Bill Kasper williamkasper@frontiernet.net wrote:
Hi list,
Just finished programming a batch of UV5R N5R2045 and -1 -7 All working fine.
I assume that you mean N5R2401, N5R2405 and N5R2407.
Using Chirp Daily 20150513: download UV5R radio image deleted existing frequencies imported same freq list used on above batch no errors at all reported all seemed OK with import and upload
OK
Unit transmits ok, RX indicator blue background lite works ok, when there is carrier or when hitting the monitor switch, just no audio. Tried set of headphones in rec jack -- still no audio.
You said all working fine above. "Unit"? Which unit? All of them? I'm confused?
Tried the same with Daily 20150530, no errors, no change.
did keyboard reset, no errors, no change.
Any possible setting that could cause this, or DOA audio output?
tnx es 73 de Bill WB2SXY
I has someone send me a "factory" image from a radio with N5R firmware within the last couple of days that appeared to have been cross-loaded with BFB firmware at the factory. That would cause a radio not to receive.
How about attaching your original downloaded image files?
Jim KC9HI _______________________________________________
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
I thought I heard a long time back that the speaker jack was flakey on a few radios and there would not be any audio, just as when the program cord is inserted. Whoever it was opened the rig to access the jacks and readjusted the contacts. Solved his problem.
Jim S
*Jim S* *KA7ARA *
On Fri, Jun 5, 2015 at 8:36 PM, Bill Kasper williamkasper@frontiernet.net wrote:
Let the HN5R set in the charger for an hour, then activated the 'hold zero' for several seconds to display the battery voltage. Audio Started working, Power On Self Test and receiving Audio OK now. go figure ???
tnx es 73 de Bill WB2SXY
--
On 6/5/2015 10:35 PM, Bill Kasper wrote:
The HN5RV01 also has a 150126N identifier No change, Thanks for the test, Tried on 146.52, TX audio still good as received on another radio, no POST audio nor RX on the HN5R unit :-(
tnx Bill WB2SXY
On 6/5/2015 10:10 PM, Jim Unroe wrote:
Hi Bill, For the fun of it, try this and report back. Jim KC9HI
On Fri, Jun 5, 2015 at 9:52 PM, Bill Kasper williamkasper@frontiernet.net wrote:
Hi Jim et al,
Thanks for the info, I sent more info, In the meantime, if someone has a known good HN5RV01 image could you please send it to me --
tnx es 73 de Bill WB2SXY
--
On 6/5/2015 6:22 PM, Jim Unroe wrote:
On Fri, Jun 5, 2015 at 5:51 PM, Bill Kasper williamkasper@frontiernet.net wrote:
Hi list,
Just finished programming a batch of UV5R N5R2045 and -1 -7 All working fine.
I assume that you mean N5R2401, N5R2405 and N5R2407.
Using Chirp Daily 20150513: download UV5R radio image deleted existing frequencies imported same freq list used on above batch no errors at all reported all seemed OK with import and upload
OK
Unit transmits ok, RX indicator blue background lite works ok, when there is carrier or when hitting the monitor switch, just no audio. Tried set of headphones in rec jack -- still no audio.
You said all working fine above. "Unit"? Which unit? All of them? I'm
confused?
Tried the same with Daily 20150530, no errors, no change.
did keyboard reset, no errors, no change.
Any possible setting that could cause this, or DOA audio output?
tnx es 73 de Bill WB2SXY
I has someone send me a "factory" image from a radio with N5R firmware within the last couple of days that appeared to have been cross-loaded with BFB firmware at the factory. That would cause a radio not to receive.
How about attaching your original downloaded image files?
Jim KC9HI _______________________________________________
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
I had the same with my Kenwood TH-F7E No audio after I unplugged a headset. As it was new and still under warranty I did sent it to Kenwood and they fixed it. No more problems the past years.
Chris Am 06.06.2015 05:49 schrieb "JS" de.ka7ara@gmail.com:
I thought I heard a long time back that the speaker jack was flakey on a few radios and there would not be any audio, just as when the program cord is inserted. Whoever it was opened the rig to access the jacks and readjusted the contacts. Solved his problem.
Jim S
*Jim S* *KA7ARA *
On Fri, Jun 5, 2015 at 8:36 PM, Bill Kasper <williamkasper@frontiernet.net
wrote:
Let the HN5R set in the charger for an hour, then activated the 'hold zero' for several seconds to display the battery voltage. Audio Started working, Power On Self Test and receiving Audio OK now. go figure ???
tnx es 73 de Bill WB2SXY
--
On 6/5/2015 10:35 PM, Bill Kasper wrote:
The HN5RV01 also has a 150126N identifier No change, Thanks for the test, Tried on 146.52, TX audio still good as received on another radio, no POST audio nor RX on the HN5R unit :-(
tnx Bill WB2SXY
On 6/5/2015 10:10 PM, Jim Unroe wrote:
Hi Bill, For the fun of it, try this and report back. Jim KC9HI
On Fri, Jun 5, 2015 at 9:52 PM, Bill Kasper williamkasper@frontiernet.net wrote:
Hi Jim et al,
Thanks for the info, I sent more info, In the meantime, if someone has a known good HN5RV01 image could you please send it to me --
tnx es 73 de Bill WB2SXY
--
On 6/5/2015 6:22 PM, Jim Unroe wrote:
On Fri, Jun 5, 2015 at 5:51 PM, Bill Kasper williamkasper@frontiernet.net wrote: > Hi list, > > Just finished programming a batch of > UV5R N5R2045 and -1 -7 > All working fine.
I assume that you mean N5R2401, N5R2405 and N5R2407.
> > Using Chirp Daily 20150513: > download UV5R radio image > deleted existing frequencies > imported same freq list used on above batch > no errors at all reported > all seemed OK with import and upload
OK
> > Unit transmits ok, RX indicator blue background lite > works ok, when there is carrier or when hitting the > monitor switch, just no audio. Tried set of headphones > in rec jack -- still no audio.
You said all working fine above. "Unit"? Which unit? All of them?
I'm confused?
> > Tried the same with Daily 20150530, no errors, > no change. > > did keyboard reset, no errors, no change. > > Any possible setting that could cause this, > or DOA audio output? > > tnx es 73 de Bill WB2SXY > --
I has someone send me a "factory" image from a radio with N5R
firmware
within the last couple of days that appeared to have been
cross-loaded
with BFB firmware at the factory. That would cause a radio not to receive.
How about attaching your original downloaded image files?
Jim KC9HI _______________________________________________
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (6)
-
Bill Kasper -
Christian Hilgers -
Daniel Lichterman -
Jardy -
Jim Unroe -
JS