Please ignore there are some spurious *'s creeping in, where in this case, it makes the text bold.

My mistake in formatting the message to emphasize things.  :-(

Other than the command line command       ls /dev/ttyU*

please ignore them!

73.

Dave B.

On 16/10/17 20:00, chirp_users-request@intrepid.danplanet.com wrote:

---

Message: 1 Date: Mon, 16 Oct 2017 09:11:40 +0100 From: Dave B g8kbv@uku.co.uk Subject: Re: [chirp_users] Connecting to my FT2DR To: chirp_users@intrepid.danplanet.com Message-ID: 8bbf66d1-c00e-161d-c946-780fffa8de0a@uku.co.uk Content-Type: text/plain; charset="utf-8"

On 15/10/17 20:00, chirp_users-request@intrepid.danplanet.com wrote:

...

On Sat, Oct 14, 2017 at 3:50 PM, rick via chirp_users chirp_users@intrepid.danplanet.com wrote:

...

Running Linux Mint 18.2

Loaded newest release version of Chirp-daily (CHIRP daily-20171013)

When I try to download from radio, this error message is displayed before I can press send on the radio

X An error has occurred Could not configure port: (5, 'input/output error')

Attached png is screengrab

I did some further digging and tried the first 10 "ttyS*" with the same results.

lsusb command provides bus and device numbers but not which ttyS* is in use.

Any Help?

I also run Linux Mint here. If you are using a USB based programming cable you must scroll all the way down to the bottom of the list and choose: /dev/ttyUSB0

Jim

Also make sure you are a member of the 'dialout' group (that is not the default case, sadly) else no serial port's (of whatever type) will be available to you.

Open a terminal window, (and make it wide so lines don't wrap, making it much easier to see what's going on.)

Then...

dave-XPS-L502X ~ $ *groups* dave adm /dialout/ cdrom sudo dip plugdev lpadmin sambashare wireshark

(Everything BEFORE and including the '$' is the system prompt on the first line.? Your machine will be different. The command 'groups' was the entered command.?? The line under that is the system response)

If 'dialout' does not appear in that list.?? Then do this... (Substitute <name> for /your/ login username,? sudo will ask for your login password.)

dave-XPS-L502X ~ $ *sudo adduser <name> dialout*

You'll see a reply saying if you've been added to the dialout group, or are already a member.

/*If */you were just added to that group, then, log out and log back in again (no need to reboot) and you'll now have access to the serial ports.

An easy way to find out what port something is assigned to, is (again, in a terminal window)

dave-XPS-L502X ~ $ *ls /dev/ttyU** /dev/ttyUSB0

This will list all attached and configured USB based serial ports.

If you have multiple USB serial devices, then do that before and after connecting a new device, to find out what "device ID" the new device is assigned to.

Hope something here helps.

Dave B