[chirp_users] CHIPRP AND TYT TH-9800
Error setting memory: Frequency 71.000000 is out of supported range
Whats that mean. Bandlimits is 66-88
Radio is 4 meter version, and works with tyts own software,
OH6Xe
Ismo,
On Mon, May 21, 2018 at 12:14 PM, Ismo Lähdeaho ismo.lahdeaho@gmail.com wrote:
Error setting memory: Frequency 71.000000 is out of supported range
Whats that mean. Bandlimits is 66-88
Radio is 4 meter version, and works with tyts own software,
OH6Xe
The current driver doesn't support the 4 meter band. It currently supports the following ranges: 26.000-33.000, 47.000-54.000, 108.000-180.000, 220.000-260.000, 350.000-399.995, 400.000-512.000 and 750.000-950.000.
Jim KC9HI
Perhaps it needs to. The 70MHz band is very common in Europe and many new rigs, being SDR based, support it. Need at least 69-72MHz coverage. Ireland is now introducing frequencies around 40MHz so that also needs covering.
On 21 May 2018 at 14:15 Jim Unroe rock.unroe@gmail.com wrote:
Ismo,
On Mon, May 21, 2018 at 12:14 PM, Ismo Lähdeaho ismo.lahdeaho@gmail.com wrote:
Error setting memory: Frequency 71.000000 is out of supported range
Whats that mean. Bandlimits is 66-88
Radio is 4 meter version, and works with tyts own software,
OH6Xe
The current driver doesn't support the 4 meter band. It currently supports the following ranges: 26.000-33.000, 47.000-54.000, 108.000-180.000, 220.000-260.000, 350.000-399.995, 400.000-512.000 and 750.000-950.000.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 Amateur Radio G8IFF W8IFF (was KC8NHF 9H3GN), e-mail nigel@ngunn.net www http://www.ngunn.net Member of ARRL, QRPARCI #11644, SOC #548, Flying Pigs QRP Club International #385, Dayton ARA #2128, AMSAT-NA LM-1691, GCARES, EAA382.
You probably don't have my fix...
Find the file th9800.py
In linux, it's here /usr/lib/python2.7/dist-packages/chirp/drivers/
Not sure where it is in Windows, so just search for it.
Change the max value for the 60M band to 71MHz:
(You could probably change the bottom-end limit to something more appropriate, too)
rf.valid_bands = [(26000000, 33000000), (47000000, *71000000*), (108000000, 180000000), (350000000, 399995000), (400000000, 512000000), (750000000, 950000000)]
Don't forget to SAVE!
It should work fine after that!!
73 de Simon, G4PEM
On Mon, 21 May 2018, 17:14 Ismo Lähdeaho, ismo.lahdeaho@gmail.com wrote:
Error setting memory: Frequency 71.000000 is out of supported range
Whats that mean. Bandlimits is 66-88
Radio is 4 meter version, and works with tyts own software,
OH6Xe
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Simon Rodda, G4PEM at simon.rodda@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
I m using windows version OH6XE
2018-05-21 23:25 GMT+03:00 Simon Rodda simon.rodda@gmail.com:
You probably don't have my fix...
Find the file th9800.py
In linux, it's here /usr/lib/python2.7/dist-packages/chirp/drivers/
Not sure where it is in Windows, so just search for it.
Change the max value for the 60M band to 71MHz:
(You could probably change the bottom-end limit to something more appropriate, too)
rf.valid_bands = [(26000000, 33000000), (47000000, *71000000*), (108000000, 180000000), (350000000, 399995000), (400000000, 512000000), (750000000, 950000000)]
Don't forget to SAVE!
It should work fine after that!!
73 de Simon, G4PEM
On Mon, 21 May 2018, 17:14 Ismo Lähdeaho, ismo.lahdeaho@gmail.com wrote:
Error setting memory: Frequency 71.000000 is out of supported range
Whats that mean. Bandlimits is 66-88
Radio is 4 meter version, and works with tyts own software,
OH6Xe
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Simon Rodda, G4PEM at simon.rodda@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to ismo at ismo.lahdeaho@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
Can anyone help with my problem with TYT. How I add 70 mhz band inchirp on windows version. OH5XE
2018-05-22 4:24 GMT+03:00 Ismo Lähdeaho ismo.lahdeaho@gmail.com:
I m using windows version OH6XE
2018-05-21 23:25 GMT+03:00 Simon Rodda simon.rodda@gmail.com:
You probably don't have my fix...
Find the file th9800.py
In linux, it's here /usr/lib/python2.7/dist-packages/chirp/drivers/
Not sure where it is in Windows, so just search for it.
Change the max value for the 60M band to 71MHz:
(You could probably change the bottom-end limit to something more appropriate, too)
rf.valid_bands = [(26000000, 33000000), (47000000, *71000000*), (108000000, 180000000), (350000000, 399995000), (400000000, 512000000), (750000000, 950000000)]
Don't forget to SAVE!
It should work fine after that!!
73 de Simon, G4PEM
On Mon, 21 May 2018, 17:14 Ismo Lähdeaho, ismo.lahdeaho@gmail.com wrote:
Error setting memory: Frequency 71.000000 is out of supported range
Whats that mean. Bandlimits is 66-88
Radio is 4 meter version, and works with tyts own software,
OH6Xe
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Simon Rodda, G4PEM at simon.rodda@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrep id.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to ismo at ismo.lahdeaho@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrep id.danplanet.com
Does that mean the instructions below regarding th9800.py didn't work?
Tom Henderson
On 06/17/2018 12:40 PM, Ismo Lähdeaho wrote:
Can anyone help with my problem with TYT. How I add 70 mhz band inchirp on windows version. OH5XE
2018-05-22 4:24 GMT+03:00 Ismo Lähdeaho <ismo.lahdeaho@gmail.com mailto:ismo.lahdeaho@gmail.com>:
I m using windows version OH6XE 2018-05-21 23:25 GMT+03:00 Simon Rodda <simon.rodda@gmail.com <mailto:simon.rodda@gmail.com>>: You probably don't have my fix... Find the file th9800.py In linux, it's here /usr/lib/python2.7/dist-packages/chirp/drivers/ Not sure where it is in Windows, so just search for it. Change the max value for the 60M band to 71MHz: (You could probably change the bottom-end limit to something more appropriate, too) |rf.valid_bands = [(26000000, 33000000), (47000000, *71000000*), (108000000, 180000000), (350000000, 399995000), (400000000, 512000000), (750000000, 950000000)] | |Don't forget to SAVE!| It should work fine after that!! 73 de Simon, G4PEM On Mon, 21 May 2018, 17:14 Ismo Lähdeaho, <ismo.lahdeaho@gmail.com <mailto:ismo.lahdeaho@gmail.com>> wrote: Error setting memory: Frequency 71.000000 is out of supported range Whats that mean. Bandlimits is 66-88 Radio is 4 meter version, and works with tyts own software, OH6Xe _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> This message was sent to Simon Rodda, G4PEM at simon.rodda@gmail.com <mailto:simon.rodda@gmail.com> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> This message was sent to ismo at ismo.lahdeaho@gmail.com <mailto:ismo.lahdeaho@gmail.com> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com>
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tom KM4UQB at tom@henderson4.us To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
That fix is for linux, I dont understand how it do to windows version?
2018-06-17 23:20 GMT+03:00 Tom Henderson Tom@henderson4.us:
Does that mean the instructions below regarding th9800.py didn't work?
Tom Henderson
On 06/17/2018 12:40 PM, Ismo Lähdeaho wrote:
Can anyone help with my problem with TYT. How I add 70 mhz band inchirp on windows version. OH5XE
2018-05-22 4:24 GMT+03:00 Ismo Lähdeaho ismo.lahdeaho@gmail.com:
I m using windows version OH6XE
2018-05-21 23:25 GMT+03:00 Simon Rodda simon.rodda@gmail.com:
You probably don't have my fix...
Find the file th9800.py
In linux, it's here /usr/lib/python2.7/dist-packages/chirp/drivers/
Not sure where it is in Windows, so just search for it.
Change the max value for the 60M band to 71MHz:
(You could probably change the bottom-end limit to something more appropriate, too)
rf.valid_bands = [(26000000, 33000000), (47000000, *71000000*), (108000000, 180000000), (350000000, 399995000), (400000000, 512000000), (750000000, 950000000)]
Don't forget to SAVE!
It should work fine after that!!
73 de Simon, G4PEM
On Mon, 21 May 2018, 17:14 Ismo Lähdeaho, ismo.lahdeaho@gmail.com wrote:
Error setting memory: Frequency 71.000000 is out of supported range
Whats that mean. Bandlimits is 66-88
Radio is 4 meter version, and works with tyts own software,
OH6Xe
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Simon Rodda, G4PEM at simon.rodda@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrep id.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to ismo at ismo.lahdeaho@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrep id.danplanet.com
chirp_users mailing listchirp_users@intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Tom KM4UQB at tom@henderson4.us To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to ismo at ismo.lahdeaho@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
It's the same fix for windows. The only difference is those of us who run it in linux don't know where it's stored under the windows version.
Did you see the line that says "Not sure where it is in Windows, so just search for it?"
Tom Henderson
On 06/17/2018 09:42 PM, Ismo Lähdeaho wrote:
That fix is for linux, I dont understand how it do to windows version?
2018-06-17 23:20 GMT+03:00 Tom Henderson <Tom@henderson4.us mailto:Tom@henderson4.us>:
Does that mean the instructions below regarding th9800.py didn't work? Tom Henderson On 06/17/2018 12:40 PM, Ismo Lähdeaho wrote:Can anyone help with my problem with TYT. How I add 70 mhz band inchirp on windows version. OH5XE 2018-05-22 4:24 GMT+03:00 Ismo Lähdeaho <ismo.lahdeaho@gmail.com <mailto:ismo.lahdeaho@gmail.com>>: I m using windows version OH6XE 2018-05-21 23:25 GMT+03:00 Simon Rodda <simon.rodda@gmail.com <mailto:simon.rodda@gmail.com>>: You probably don't have my fix... Find the file th9800.py In linux, it's here /usr/lib/python2.7/dist-packages/chirp/drivers/ Not sure where it is in Windows, so just search for it. Change the max value for the 60M band to 71MHz: (You could probably change the bottom-end limit to something more appropriate, too) |rf.valid_bands = [(26000000, 33000000), (47000000, *71000000*), (108000000, 180000000), (350000000, 399995000), (400000000, 512000000), (750000000, 950000000)] | |Don't forget to SAVE!| It should work fine after that!! 73 de Simon, G4PEM On Mon, 21 May 2018, 17:14 Ismo Lähdeaho, <ismo.lahdeaho@gmail.com <mailto:ismo.lahdeaho@gmail.com>> wrote: Error setting memory: Frequency 71.000000 is out of supported range Whats that mean. Bandlimits is 66-88 Radio is 4 meter version, and works with tyts own software, OH6Xe _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> This message was sent to Simon Rodda, G4PEM at simon.rodda@gmail.com <mailto:simon.rodda@gmail.com> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> This message was sent to ismo at ismo.lahdeaho@gmail.com <mailto:ismo.lahdeaho@gmail.com> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> This message was sent to Tom KM4UQB attom@henderson4.us <mailto:tom@henderson4.us>To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com>_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> This message was sent to ismo at ismo.lahdeaho@gmail.com <mailto:ismo.lahdeaho@gmail.com> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com>
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tom KM4UQB at tom@henderson4.us To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On Mon, Jun 18, 2018 at 5:45 AM, Tom Henderson Tom@henderson4.us wrote:
It's the same fix for windows. The only difference is those of us who run it in linux don't know where it's stored under the windows version.
Did you see the line that says "Not sure where it is in Windows, so just search for it?"
Tom Henderson
It isn't the same for Windows. The user doesn't have access to the individual *.py files with Windows. As far as I know, the best a Windows user can do is to download the th9800.py driver from the CHIRP repository, edit it as needed, then after enabling "Enable developer functions" load the modified driver using File -> Load module selection. And this custom driver would have to be loaded every time CHIRP was launched.
Jim KC9HI
Aha! Thanks for setting the record straight then.
Tom Henderson
On 06/18/2018 04:59 AM, Jim Unroe wrote:
On Mon, Jun 18, 2018 at 5:45 AM, Tom Henderson Tom@henderson4.us wrote:
It's the same fix for windows. The only difference is those of us who run it in linux don't know where it's stored under the windows version.
Did you see the line that says "Not sure where it is in Windows, so just search for it?"
Tom Henderson
It isn't the same for Windows. The user doesn't have access to the individual *.py files with Windows. As far as I know, the best a Windows user can do is to download the th9800.py driver from the CHIRP repository, edit it as needed, then after enabling "Enable developer functions" load the modified driver using File -> Load module selection. And this custom driver would have to be loaded every time CHIRP was launched.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tom KM4UQB at tom@henderson4.us To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
I feel bad for people like this, because I am one of them. I have no problem at all digging into an electronics circuit. Shoot, I'm certified to run the power grid, so electronics/electrical doesn't scare me a bit. I have no problem laying out under my JEEP for days with a pile of tools modifying the suspension or working on something I broke. But software is magical. I can't wrap my head around how it works, so when it doesn't work it is frustrating to the max. And when it doesn't work, I need like step-by-step 1-2-3-4-5 directions or I likely cannot fix it. This is why I'm willing to pay for the more expensive but totally reliable cables. I feel certain if I have a problem, the cables are eliminated.
We all have skills, and we all have challenges. You folks who jump in and try to help others, you're great! Thanks for trying, sometimes even when the frustration level on the other end is running high.
Speaking of running the power grid, I'm out the door. Training today and tomorrow. Running the generation desk Thu-Fri. Everyone - have a safe day! And if you're on the Western Grid, we'll be doing our best to keep it steady at 60 Hz.
Vy73 - Mike - KD5KC El Paso, Texas - DM61rt
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of Tom Henderson Sent: Monday, June 18, 2018 5:13 AM To: chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] CHIPRP AND TYT TH-9800
Aha! Thanks for setting the record straight then.
Tom Henderson
On 06/18/2018 04:59 AM, Jim Unroe wrote:
On Mon, Jun 18, 2018 at 5:45 AM, Tom Henderson Tom@henderson4.us wrote:
It's the same fix for windows. The only difference is those of us who run it in linux don't know where it's stored under the windows version.
Did you see the line that says "Not sure where it is in Windows, so just search for it?"
Tom Henderson
It isn't the same for Windows. The user doesn't have access to the individual *.py files with Windows. As far as I know, the best a Windows user can do is to download the th9800.py driver from the CHIRP repository, edit it as needed, then after enabling "Enable developer functions" load the modified driver using File -> Load module selection. And this custom driver would have to be loaded every time CHIRP was launched.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tom KM4UQB at tom@henderson4.us To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to mike-2007@elp.rr.com at mike-2007@elp.rr.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Your problem with software is mine, but I found a way to get over it. Most Unix based OS's use text files to configure and start up the machine. Indeed there is something called Linux From Scratch (LFS): http://www.linuxfromscratch.org/ It will take you by the hand and show you how to build your own OS, and in the process you will learn how the innards work. Since the config files are text you will learn how to follow them and see exactly how the system boots up and manages the whole thing.
In my view Windows is like a car with the hood welded shut.
Unix based systems for the most part are like a car that provides all of the documentation to dig into the vehicle and fix it your self.
Even Apple Macs are in my view easier to work on than Windows because of the BSD based OS. I can go in and follow what the machine is doing, at least until it gets into the GUI, there it gets a bit hermetic, but still more open than Windows.
LFS is all on line so you can go in and follow it, repeat the parts you do not understand and see the results as you go through it.
Take a look at it, I think it will help you gain a better idea of what is going on. Even for the MS environments, they all have to do certain things about the same on any given piece of hardware, it is just that with Linux you can go in and see how it is done then use that to have an idea of what MS is doing with Windows.
On Mon, Jun 18, 2018 at 7:26 AM mike-2007@elp.rr.com wrote:
I feel bad for people like this, because I am one of them. I have no problem at all digging into an electronics circuit. Shoot, I'm certified to run the power grid, so electronics/electrical doesn't scare me a bit. I have no problem laying out under my JEEP for days with a pile of tools modifying the suspension or working on something I broke. But software is magical. I can't wrap my head around how it works, so when it doesn't work it is frustrating to the max. And when it doesn't work, I need like step-by-step 1-2-3-4-5 directions or I likely cannot fix it. This is why I'm willing to pay for the more expensive but totally reliable cables. I feel certain if I have a problem, the cables are eliminated.
We all have skills, and we all have challenges. You folks who jump in and try to help others, you're great! Thanks for trying, sometimes even when the frustration level on the other end is running high.
Speaking of running the power grid, I'm out the door. Training today and tomorrow. Running the generation desk Thu-Fri. Everyone - have a safe day! And if you're on the Western Grid, we'll be doing our best to keep it steady at 60 Hz.
Vy73 - Mike - KD5KC El Paso, Texas - DM61rt
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of Tom Henderson Sent: Monday, June 18, 2018 5:13 AM To: chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] CHIPRP AND TYT TH-9800
Aha! Thanks for setting the record straight then.
Tom Henderson
On 06/18/2018 04:59 AM, Jim Unroe wrote:
On Mon, Jun 18, 2018 at 5:45 AM, Tom Henderson Tom@henderson4.us
wrote:
It's the same fix for windows. The only difference is those of us who run it in linux don't know where it's stored under the windows version.
Did you see the line that says "Not sure where it is in Windows, so just search for it?"
Tom Henderson
It isn't the same for Windows. The user doesn't have access to the individual *.py files with Windows. As far as I know, the best a Windows user can do is to download the th9800.py driver from the CHIRP repository, edit it as needed, then after enabling "Enable developer functions" load the modified driver using File -> Load module selection. And this custom driver would have to be loaded every time CHIRP was launched.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tom KM4UQB at tom@henderson4.us To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to mike-2007@elp.rr.com at mike-2007@elp.rr.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck Hast at kp4djt@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Yeah, thanks but we are not headed in that direction. #1 – Windoze is hard enough, and #2 – we have a specialized program for another (more important) hobby that will only run in Windows. A more computer-savvy friend tried running this software under wine, and even on a MAC. It just doesn’t go. It says right on the CD – WINDOWS ONLY. And it seems they mean it.
The wife and I have tons of data going back to WW-II in this program. We’re not willing to give it up. The software developer will not even entertain the idea of helping to get the software moved to another platform. He says he has enough with Windows, he doesn’t need the headache of supporting another platform. But his software is so good for our breeding program, nothing else compares.
I had considered taking the old Win-7 computer and setting it up….. but the reason for the Win-10 upgrade is because when I dusted out the Win-7 box last month, I noticed a couple of electrolytic caps on the mother board were swelling. A sure sign of future failure. We’ll just let it go, it is like 8 years old anyway.
Y-all have a wonderful evening.
Vy73 – Mike – KD5KC
El Paso, Texas – DM61rt
From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of Chuck Hast Sent: Monday, June 18, 2018 7:02 AM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] CHIPRP AND TYT TH-9800
Your problem with software is mine, but I found a way to get over it. Most Unix based
OS's use text files to configure and start up the machine. Indeed there is something
called Linux From Scratch (LFS):
http://www.linuxfromscratch.org/
It will take you by the hand and show you how to build your own OS, and in the process
you will learn how the innards work. Since the config files are text you will learn how to
follow them and see exactly how the system boots up and manages the whole thing.
In my view Windows is like a car with the hood welded shut.
Unix based systems for the most part are like a car that provides all of the documentation
to dig into the vehicle and fix it your self.
Even Apple Macs are in my view easier to work on than Windows because of the BSD
based OS. I can go in and follow what the machine is doing, at least until it gets into
the GUI, there it gets a bit hermetic, but still more open than Windows.
LFS is all on line so you can go in and follow it, repeat the parts you do not understand
and see the results as you go through it.
Take a look at it, I think it will help you gain a better idea of what is going on. Even for
the MS environments, they all have to do certain things about the same on any given
piece of hardware, it is just that with Linux you can go in and see how it is done then
use that to have an idea of what MS is doing with Windows.
On Mon, Jun 18, 2018 at 7:26 AM <mike-2007@elp.rr.com mailto:mike-2007@elp.rr.com > wrote:
I feel bad for people like this, because I am one of them. I have no problem at all digging into an electronics circuit. Shoot, I'm certified to run the power grid, so electronics/electrical doesn't scare me a bit. I have no problem laying out under my JEEP for days with a pile of tools modifying the suspension or working on something I broke. But software is magical. I can't wrap my head around how it works, so when it doesn't work it is frustrating to the max. And when it doesn't work, I need like step-by-step 1-2-3-4-5 directions or I likely cannot fix it. This is why I'm willing to pay for the more expensive but totally reliable cables. I feel certain if I have a problem, the cables are eliminated.
We all have skills, and we all have challenges. You folks who jump in and try to help others, you're great! Thanks for trying, sometimes even when the frustration level on the other end is running high.
Speaking of running the power grid, I'm out the door. Training today and tomorrow. Running the generation desk Thu-Fri. Everyone - have a safe day! And if you're on the Western Grid, we'll be doing our best to keep it steady at 60 Hz.
Vy73 - Mike - KD5KC El Paso, Texas - DM61rt
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com mailto:chirp_users-bounces@intrepid.danplanet.com <chirp_users-bounces@intrepid.danplanet.com mailto:chirp_users-bounces@intrepid.danplanet.com > On Behalf Of Tom Henderson Sent: Monday, June 18, 2018 5:13 AM To: chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] CHIPRP AND TYT TH-9800
Aha! Thanks for setting the record straight then.
Tom Henderson
On 06/18/2018 04:59 AM, Jim Unroe wrote:
On Mon, Jun 18, 2018 at 5:45 AM, Tom Henderson <Tom@henderson4.us mailto:Tom@henderson4.us > wrote:
It's the same fix for windows. The only difference is those of us who run it in linux don't know where it's stored under the windows version.
Did you see the line that says "Not sure where it is in Windows, so just search for it?"
Tom Henderson
It isn't the same for Windows. The user doesn't have access to the individual *.py files with Windows. As far as I know, the best a Windows user can do is to download the th9800.py driver from the CHIRP repository, edit it as needed, then after enabling "Enable developer functions" load the modified driver using File -> Load module selection. And this custom driver would have to be loaded every time CHIRP was launched.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tom KM4UQB at tom@henderson4.us mailto:tom@henderson4.us To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to mike-2007@elp.rr.com mailto:mike-2007@elp.rr.com at mike-2007@elp.rr.com mailto:mike-2007@elp.rr.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck Hast at kp4djt@gmail.com mailto:kp4djt@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
Yes, I have a DMR radio, the CPS for it seems to be deeply rooted in windows, so I can understand that. I would certainly try to keep with Win7 as long as you can. Win10 is not making a lot of friends from what I can see. Perhaps you can find some newer hardware to move that Win7 machine too and keep it, at least Win7 was a good OS as far as MS OSes were concerned. I run the windows thing in a virtual machine, that way I do not have so many issues with it. And I run a pretty strong firewall in the host machine to protect it. And also stop it from "calling home" (it is Win10 which does that sort of thing).
On Mon, Jun 18, 2018 at 7:16 PM mike-2007@elp.rr.com wrote:
Yeah, thanks but we are not headed in that direction. #1 – Windoze is hard enough, and #2 – we have a specialized program for another (more important) hobby that will only run in Windows. A more computer-savvy friend tried running this software under wine, and even on a MAC. It just doesn’t go. It says right on the CD – WINDOWS ONLY. And it seems they mean it.
The wife and I have tons of data going back to WW-II in this program. We’re not willing to give it up. The software developer will not even entertain the idea of helping to get the software moved to another platform. He says he has enough with Windows, he doesn’t need the headache of supporting another platform. But his software is so good for our breeding program, nothing else compares.
I had considered taking the old Win-7 computer and setting it up….. but the reason for the Win-10 upgrade is because when I dusted out the Win-7 box last month, I noticed a couple of electrolytic caps on the mother board were swelling. A sure sign of future failure. We’ll just let it go, it is like 8 years old anyway.
Y-all have a wonderful evening.
Vy73 – Mike – KD5KC
El Paso, Texas – DM61rt
*From:* chirp_users-bounces@intrepid.danplanet.com < chirp_users-bounces@intrepid.danplanet.com> *On Behalf Of *Chuck Hast *Sent:* Monday, June 18, 2018 7:02 AM *To:* Discussion of CHIRP chirp_users@intrepid.danplanet.com *Subject:* Re: [chirp_users] CHIPRP AND TYT TH-9800
Your problem with software is mine, but I found a way to get over it. Most Unix based
OS's use text files to configure and start up the machine. Indeed there is something
called Linux >From Scratch (LFS):
http://www.linuxfromscratch.org/
It will take you by the hand and show you how to build your own OS, and in the process
you will learn how the innards work. Since the config files are text you will learn how to
follow them and see exactly how the system boots up and manages the whole thing.
In my view Windows is like a car with the hood welded shut.
Unix based systems for the most part are like a car that provides all of the documentation
to dig into the vehicle and fix it your self.
Even Apple Macs are in my view easier to work on than Windows because of the BSD
based OS. I can go in and follow what the machine is doing, at least until it gets into
the GUI, there it gets a bit hermetic, but still more open than Windows.
LFS is all on line so you can go in and follow it, repeat the parts you do not understand
and see the results as you go through it.
Take a look at it, I think it will help you gain a better idea of what is going on. Even for
the MS environments, they all have to do certain things about the same on any given
piece of hardware, it is just that with Linux you can go in and see how it is done then
use that to have an idea of what MS is doing with Windows.
On Mon, Jun 18, 2018 at 7:26 AM mike-2007@elp.rr.com wrote:
I feel bad for people like this, because I am one of them. I have no problem at all digging into an electronics circuit. Shoot, I'm certified to run the power grid, so electronics/electrical doesn't scare me a bit. I have no problem laying out under my JEEP for days with a pile of tools modifying the suspension or working on something I broke. But software is magical. I can't wrap my head around how it works, so when it doesn't work it is frustrating to the max. And when it doesn't work, I need like step-by-step 1-2-3-4-5 directions or I likely cannot fix it. This is why I'm willing to pay for the more expensive but totally reliable cables. I feel certain if I have a problem, the cables are eliminated.
We all have skills, and we all have challenges. You folks who jump in and try to help others, you're great! Thanks for trying, sometimes even when the frustration level on the other end is running high.
Speaking of running the power grid, I'm out the door. Training today and tomorrow. Running the generation desk Thu-Fri. Everyone - have a safe day! And if you're on the Western Grid, we'll be doing our best to keep it steady at 60 Hz.
Vy73 - Mike - KD5KC El Paso, Texas - DM61rt
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of Tom Henderson Sent: Monday, June 18, 2018 5:13 AM To: chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] CHIPRP AND TYT TH-9800
Aha! Thanks for setting the record straight then.
Tom Henderson
On 06/18/2018 04:59 AM, Jim Unroe wrote:
On Mon, Jun 18, 2018 at 5:45 AM, Tom Henderson Tom@henderson4.us
wrote:
It's the same fix for windows. The only difference is those of us who run it in linux don't know where it's stored under the windows version.
Did you see the line that says "Not sure where it is in Windows, so just search for it?"
Tom Henderson
It isn't the same for Windows. The user doesn't have access to the individual *.py files with Windows. As far as I know, the best a Windows user can do is to download the th9800.py driver from the CHIRP repository, edit it as needed, then after enabling "Enable developer functions" load the modified driver using File -> Load module selection. And this custom driver would have to be loaded every time CHIRP was launched.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tom KM4UQB at tom@henderson4.us To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to mike-2007@elp.rr.com at mike-2007@elp.rr.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck Hast at kp4djt@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
--
Chirp + Editcp + MD380Tools on Linux
Celestial!!!
Chuck -- KP4DJT _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck Hast at kp4djt@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Load updated th9800.py module didnt solve problem. Any ideas
OH6XE
2018-06-19 7:16 GMT+03:00 Chuck Hast kp4djt@gmail.com:
Yes, I have a DMR radio, the CPS for it seems to be deeply rooted in windows, so I can understand that. I would certainly try to keep with Win7 as long as you can. Win10 is not making a lot of friends from what I can see. Perhaps you can find some newer hardware to move that Win7 machine too and keep it, at least Win7 was a good OS as far as MS OSes were concerned. I run the windows thing in a virtual machine, that way I do not have so many issues with it. And I run a pretty strong firewall in the host machine to protect it. And also stop it from "calling home" (it is Win10 which does that sort of thing).
On Mon, Jun 18, 2018 at 7:16 PM mike-2007@elp.rr.com wrote:
Yeah, thanks but we are not headed in that direction. #1 – Windoze is hard enough, and #2 – we have a specialized program for another (more important) hobby that will only run in Windows. A more computer-savvy friend tried running this software under wine, and even on a MAC. It just doesn’t go. It says right on the CD – WINDOWS ONLY. And it seems they mean it.
The wife and I have tons of data going back to WW-II in this program. We’re not willing to give it up. The software developer will not even entertain the idea of helping to get the software moved to another platform. He says he has enough with Windows, he doesn’t need the headache of supporting another platform. But his software is so good for our breeding program, nothing else compares.
I had considered taking the old Win-7 computer and setting it up….. but the reason for the Win-10 upgrade is because when I dusted out the Win-7 box last month, I noticed a couple of electrolytic caps on the mother board were swelling. A sure sign of future failure. We’ll just let it go, it is like 8 years old anyway.
Y-all have a wonderful evening.
Vy73 – Mike – KD5KC
El Paso, Texas – DM61rt
*From:* chirp_users-bounces@intrepid.danplanet.com < chirp_users-bounces@intrepid.danplanet.com> *On Behalf Of *Chuck Hast *Sent:* Monday, June 18, 2018 7:02 AM *To:* Discussion of CHIRP chirp_users@intrepid.danplanet.com *Subject:* Re: [chirp_users] CHIPRP AND TYT TH-9800
Your problem with software is mine, but I found a way to get over it. Most Unix based
OS's use text files to configure and start up the machine. Indeed there is something
called Linux >From Scratch (LFS):
http://www.linuxfromscratch.org/
It will take you by the hand and show you how to build your own OS, and in the process
you will learn how the innards work. Since the config files are text you will learn how to
follow them and see exactly how the system boots up and manages the whole thing.
In my view Windows is like a car with the hood welded shut.
Unix based systems for the most part are like a car that provides all of the documentation
to dig into the vehicle and fix it your self.
Even Apple Macs are in my view easier to work on than Windows because of the BSD
based OS. I can go in and follow what the machine is doing, at least until it gets into
the GUI, there it gets a bit hermetic, but still more open than Windows.
LFS is all on line so you can go in and follow it, repeat the parts you do not understand
and see the results as you go through it.
Take a look at it, I think it will help you gain a better idea of what is going on. Even for
the MS environments, they all have to do certain things about the same on any given
piece of hardware, it is just that with Linux you can go in and see how it is done then
use that to have an idea of what MS is doing with Windows.
On Mon, Jun 18, 2018 at 7:26 AM mike-2007@elp.rr.com wrote:
I feel bad for people like this, because I am one of them. I have no problem at all digging into an electronics circuit. Shoot, I'm certified to run the power grid, so electronics/electrical doesn't scare me a bit. I have no problem laying out under my JEEP for days with a pile of tools modifying the suspension or working on something I broke. But software is magical. I can't wrap my head around how it works, so when it doesn't work it is frustrating to the max. And when it doesn't work, I need like step-by-step 1-2-3-4-5 directions or I likely cannot fix it. This is why I'm willing to pay for the more expensive but totally reliable cables. I feel certain if I have a problem, the cables are eliminated.
We all have skills, and we all have challenges. You folks who jump in and try to help others, you're great! Thanks for trying, sometimes even when the frustration level on the other end is running high.
Speaking of running the power grid, I'm out the door. Training today and tomorrow. Running the generation desk Thu-Fri. Everyone - have a safe day! And if you're on the Western Grid, we'll be doing our best to keep it steady at 60 Hz.
Vy73 - Mike - KD5KC El Paso, Texas - DM61rt
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of Tom Henderson Sent: Monday, June 18, 2018 5:13 AM To: chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] CHIPRP AND TYT TH-9800
Aha! Thanks for setting the record straight then.
Tom Henderson
On 06/18/2018 04:59 AM, Jim Unroe wrote:
On Mon, Jun 18, 2018 at 5:45 AM, Tom Henderson Tom@henderson4.us
wrote:
It's the same fix for windows. The only difference is those of us who run it in linux don't know where it's stored under the windows version.
Did you see the line that says "Not sure where it is in Windows, so just search for it?"
Tom Henderson
It isn't the same for Windows. The user doesn't have access to the individual *.py files with Windows. As far as I know, the best a Windows user can do is to download the th9800.py driver from the CHIRP repository, edit it as needed, then after enabling "Enable developer functions" load the modified driver using File -> Load module selection. And this custom driver would have to be loaded every time CHIRP was launched.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tom KM4UQB at tom@henderson4.us To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to mike-2007@elp.rr.com at mike-2007@elp.rr.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck Hast at kp4djt@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
--
Chirp + Editcp + MD380Tools on Linux
Celestial!!!
Chuck -- KP4DJT _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck Hast at kp4djt@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
-- Chirp + Editcp + MD380Tools on Linux Celestial!!! Chuck -- KP4DJT
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to ismo at ismo.lahdeaho@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
Are.you getting an error message?? What is not working or how is it not working?
Are you able to download the current config from the radio using chirp?
Thanks Simon R
On Fri, 22 Jun 2018, 05:42 Ismo Lähdeaho, ismo.lahdeaho@gmail.com wrote:
Load updated th9800.py module didnt solve problem. Any ideas
OH6XE
2018-06-19 7:16 GMT+03:00 Chuck Hast kp4djt@gmail.com:
Yes, I have a DMR radio, the CPS for it seems to be deeply rooted in windows, so I can understand that. I would certainly try to keep with Win7 as long as you can. Win10 is not making a lot of friends from what I can see. Perhaps you can find some newer hardware to move that Win7 machine too and keep it, at least Win7 was a good OS as far as MS OSes were concerned. I run the windows thing in a virtual machine, that way I do not have so many issues with it. And I run a pretty strong firewall in the host machine to protect it. And also stop it from "calling home" (it is Win10 which does that sort of thing).
On Mon, Jun 18, 2018 at 7:16 PM mike-2007@elp.rr.com wrote:
Yeah, thanks but we are not headed in that direction. #1 – Windoze is hard enough, and #2 – we have a specialized program for another (more important) hobby that will only run in Windows. A more computer-savvy friend tried running this software under wine, and even on a MAC. It just doesn’t go. It says right on the CD – WINDOWS ONLY. And it seems they mean it.
The wife and I have tons of data going back to WW-II in this program. We’re not willing to give it up. The software developer will not even entertain the idea of helping to get the software moved to another platform. He says he has enough with Windows, he doesn’t need the headache of supporting another platform. But his software is so good for our breeding program, nothing else compares.
I had considered taking the old Win-7 computer and setting it up….. but the reason for the Win-10 upgrade is because when I dusted out the Win-7 box last month, I noticed a couple of electrolytic caps on the mother board were swelling. A sure sign of future failure. We’ll just let it go, it is like 8 years old anyway.
Y-all have a wonderful evening.
Vy73 – Mike – KD5KC
El Paso, Texas – DM61rt
*From:* chirp_users-bounces@intrepid.danplanet.com < chirp_users-bounces@intrepid.danplanet.com> *On Behalf Of *Chuck Hast *Sent:* Monday, June 18, 2018 7:02 AM *To:* Discussion of CHIRP chirp_users@intrepid.danplanet.com *Subject:* Re: [chirp_users] CHIPRP AND TYT TH-9800
Your problem with software is mine, but I found a way to get over it. Most Unix based
OS's use text files to configure and start up the machine. Indeed there is something
called Linux >From Scratch (LFS):
http://www.linuxfromscratch.org/
It will take you by the hand and show you how to build your own OS, and in the process
you will learn how the innards work. Since the config files are text you will learn how to
follow them and see exactly how the system boots up and manages the whole thing.
In my view Windows is like a car with the hood welded shut.
Unix based systems for the most part are like a car that provides all of the documentation
to dig into the vehicle and fix it your self.
Even Apple Macs are in my view easier to work on than Windows because of the BSD
based OS. I can go in and follow what the machine is doing, at least until it gets into
the GUI, there it gets a bit hermetic, but still more open than Windows.
LFS is all on line so you can go in and follow it, repeat the parts you do not understand
and see the results as you go through it.
Take a look at it, I think it will help you gain a better idea of what is going on. Even for
the MS environments, they all have to do certain things about the same on any given
piece of hardware, it is just that with Linux you can go in and see how it is done then
use that to have an idea of what MS is doing with Windows.
On Mon, Jun 18, 2018 at 7:26 AM mike-2007@elp.rr.com wrote:
I feel bad for people like this, because I am one of them. I have no problem at all digging into an electronics circuit. Shoot, I'm certified to run the power grid, so electronics/electrical doesn't scare me a bit. I have no problem laying out under my JEEP for days with a pile of tools modifying the suspension or working on something I broke. But software is magical. I can't wrap my head around how it works, so when it doesn't work it is frustrating to the max. And when it doesn't work, I need like step-by-step 1-2-3-4-5 directions or I likely cannot fix it. This is why I'm willing to pay for the more expensive but totally reliable cables. I feel certain if I have a problem, the cables are eliminated.
We all have skills, and we all have challenges. You folks who jump in and try to help others, you're great! Thanks for trying, sometimes even when the frustration level on the other end is running high.
Speaking of running the power grid, I'm out the door. Training today and tomorrow. Running the generation desk Thu-Fri. Everyone - have a safe day! And if you're on the Western Grid, we'll be doing our best to keep it steady at 60 Hz.
Vy73 - Mike - KD5KC El Paso, Texas - DM61rt
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of Tom Henderson Sent: Monday, June 18, 2018 5:13 AM To: chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] CHIPRP AND TYT TH-9800
Aha! Thanks for setting the record straight then.
Tom Henderson
On 06/18/2018 04:59 AM, Jim Unroe wrote:
On Mon, Jun 18, 2018 at 5:45 AM, Tom Henderson Tom@henderson4.us
wrote:
It's the same fix for windows. The only difference is those of us who run it in linux don't know where it's stored under the windows
version.
Did you see the line that says "Not sure where it is in Windows, so just search for it?"
Tom Henderson
It isn't the same for Windows. The user doesn't have access to the individual *.py files with Windows. As far as I know, the best a Windows user can do is to download the th9800.py driver from the CHIRP repository, edit it as needed, then after enabling "Enable developer functions" load the modified driver using File -> Load module selection. And this custom driver would have to be loaded every time CHIRP was launched.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tom KM4UQB at tom@henderson4.us To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to mike-2007@elp.rr.com at mike-2007@elp.rr.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck Hast at kp4djt@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
--
Chirp + Editcp + MD380Tools on Linux
Celestial!!!
Chuck -- KP4DJT _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck Hast at kp4djt@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
-- Chirp + Editcp + MD380Tools on Linux Celestial!!! Chuck -- KP4DJT
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to ismo at ismo.lahdeaho@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Simon Rodda, G4PEM at simon.rodda@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Thanks Jim,
I did the original mod; dont use windows so have no idea. Guess I should really get that fix included in the official build!
Best wishes all, Simon R, G4PEM
On Mon, 18 Jun 2018, 10:59 Jim Unroe, rock.unroe@gmail.com wrote:
On Mon, Jun 18, 2018 at 5:45 AM, Tom Henderson Tom@henderson4.us wrote:
It's the same fix for windows. The only difference is those of us who
run it
in linux don't know where it's stored under the windows version.
Did you see the line that says "Not sure where it is in Windows, so just search for it?"
Tom Henderson
It isn't the same for Windows. The user doesn't have access to the individual *.py files with Windows. As far as I know, the best a Windows user can do is to download the th9800.py driver from the CHIRP repository, edit it as needed, then after enabling "Enable developer functions" load the modified driver using File -> Load module selection. And this custom driver would have to be loaded every time CHIRP was launched.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Simon Rodda, G4PEM at simon.rodda@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (7)
-
Chuck Hast -
Ismo Lähdeaho -
Jim Unroe -
mike-2007＠elp.rr.com -
Nigel A. Gunn G8IFF/W8IFF -
Simon Rodda -
Tom Henderson