Compared to another person's Tyt TH-9800, my file has 0 in the offset for the CB channels and the other one has 0.6 I would think that should be 0. The other file has cToneFreq and dTcScodes filled in the CB channels, mine are blank. Glenn.
Sent From My Tabletop
Make a copy of his file and use it. Or edit the changes you just said: change offset to 0.6 and fill in the cToneFreq and dTcScodes so yours will work.
"I would think" has nothing to do with this.
73
David N1EA
On Sun, Jan 13, 2019, 00:09 Glenn At Home <GlennErvin@cableone.net wrote:
Compared to another person's Tyt TH-9800, my file has 0 in the offset for the CB channels and the other one has 0.6 I would think that should be 0. The other file has cToneFreq and dTcScodes filled in the CB channels, mine are blank. Glenn.
Sent From My Tabletop _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Yes, I imported that file last night and no errors. So I will probably first try copying over the different columns first. I still can't seem to get it to work to test it because I put my HT on a channel and I tried entering the same channel onto the microphone and I tried scanning, and it must not be scanning. But that isn't Chirp, I think that is my inability to use the radio yet. Glenn
----- Original Message ----- From: D.J.J. Ring, Jr. To: Discussion of CHIRP Sent: Sunday, January 13, 2019 9:16 AM Subject: Re: [chirp_users] CSV File
Make a copy of his file and use it. Or edit the changes you just said: change offset to 0.6 and fill in the cToneFreq and dTcScodes so yours will work.
"I would think" has nothing to do with this.
73
David N1EA
On Sun, Jan 13, 2019, 00:09 Glenn At Home <GlennErvin@cableone.net wrote:
Compared to another person's Tyt TH-9800, my file has 0 in the offset for the CB channels and the other one has 0.6 I would think that should be 0. The other file has cToneFreq and dTcScodes filled in the CB channels, mine are blank. Glenn.
Sent From My Tabletop _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
--------------------------------------------------------------------------------
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (2)
-
D.J.J. Ring, Jr. -
Glenn At Home