[chirp_users] More communications problems
My problems continue.
I have a Yaesu VX-6R and am using Chirp on a Mac.
My prior issue was an incompatibility between my operating system and the USB driver. I can now communicate and download from my radio to my computer. But, I cannot upload from the computer to the radio. When I try to upload, the process starts and I can see the blue progress bar. Then, the radio reports an "Error" and Chirp just sits there doing nothing.
I have tried downloading the one programmed frequency and then immediately uploading it, but get the error described above. I have also tried with data I enter directly into Chirp.
Any ideas?
as to refresh you in case,
hold f/w and turn radio on.
on destination radio indeed, press v/m and wait will apprear, send from chirp now.
you prolly know this but occasionaly it easy to forget or press band which is to read not rx data..
----- Original Message ----- From: "Bruce Warren" bruce@sendlgm.com To: chirp_users@intrepid.danplanet.com Sent: Wednesday, July 11, 2018 3:44 PM Subject: [chirp_users] More communications problems
My problems continue.
I have a Yaesu VX-6R and am using Chirp on a Mac.
My prior issue was an incompatibility between my operating system and the USB driver. I can now communicate and download from my radio to my computer. But, I cannot upload from the computer to the radio. When I try to upload, the process starts and I can see the blue progress bar. Then, the radio reports an "Error" and Chirp just sits there doing nothing.
I have tried downloading the one programmed frequency and then immediately uploading it, but get the error described above. I have also tried with data I enter directly into Chirp.
Any ideas? _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Neil Byng at neilbyng@maxeymoverley.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
as to refresh you in case,
hold f/w and turn radio on.
on destination radio indeed, press v/m and wait will apprear, send from chirp now.
you prolly know this but occasionaly it easy to forget or press band which is to read not rx data..
----- Original Message ----- From: "Bruce Warren" bruce@sendlgm.com To: chirp_users@intrepid.danplanet.com Sent: Wednesday, July 11, 2018 3:44 PM Subject: [chirp_users] More communications problems
My problems continue.
I have a Yaesu VX-6R and am using Chirp on a Mac.
My prior issue was an incompatibility between my operating system and the USB driver. I can now communicate and download from my radio to my computer. But, I cannot upload from the computer to the radio. When I try to upload, the process starts and I can see the blue progress bar. Then, the radio reports an "Error" and Chirp just sits there doing nothing.
I have tried downloading the one programmed frequency and then immediately uploading it, but get the error described above. I have also tried with data I enter directly into Chirp.
Any ideas? _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Neil Byng at neilbyng@maxeymoverley.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (2)
-
Bruce Warren -
Neil Byng