On 11/20/2017 10:26, Jim Unroe wrote:

...

I installed.... The confusing thing is that when setting a squelch threshold to zero for testing, the squelch doesn't stay open. This is confusing... a zero threshold should be the same a zero squelch, correct?

That is the way these radios behave. Zero (0) isn't a valid value for SQL values 1-9 just like values above 1 are not valid for SQL 0. It was easy to make SQL 0 uneditable. Why would you want to program SQL 1-9 as 0 when you can just use SQL 0?

Jim KC9HI

Ok... that makes sense

Here's what you need

sudo apt-add-repository ppa:dansmith/chirp-snapshots

sudo apt-get update

sudo apt-get install chirp-daily

On 20 November 2017 at 23:08 Chuck Hast kp4djt@gmail.com wrote:

Folks,
Went to pull down the latest and greatest, and I am greeted with the screen
that tells all about the latest and greatest. Down at the bottom of the screen
where it gives the info on the tar file, it tells those using Ubuntu to install the
ppa, but when you do that you get code that is dated 20160110.

So now do I download the real tar file and install it, will it overwrite the install
from the ppa or do I need to clear that out? If so then would it not be better to
remove it or is the ppa supposed to update with each new build?


On Mon, Nov 20, 2017 at 2:13 AM, Build System <donotreply@danplanet.com mailto:donotreply@danplanet.com > wrote:

    > > Greetings,

...

    A new daily build of CHIRP is available.  This includes changes made
    directly to the tree yesterday, and may include additional features,
    bug fixes, and/or bugs.  If you are interested in trying it, grab it
    from the following location:

      http://trac.chirp.danplanet.com/chirp_daily/daily-20171120 http://trac.chirp.danplanet.com/chirp_daily/daily-20171120


    A list of the changes included in this build (since the last daily)
    follows:

    Changes for Build #505
    [Jim Unroe <rock.unroe@gmail.com mailto:rock.unroe@gmail.com >] [UV-5X3] Update Service Settings Menu

    The settings labeled VHF Squelch [0-9] are actually the 220 squelch settings.
    This patch renames these settings to 220 Squelch [0-9] and adds the missing
    VHF Squelch [0-9] settings.

    related to #5333

    [Christopher Hoover <ch@murgatroid.com mailto:ch@murgatroid.com >] Fixes case where column order setting parsing was calling split on None. #5355

    [Dan Smith <dsmith@danplanet.com mailto:dsmith@danplanet.com >] Patch fuzz compensation for #5355

    [Christopher Hoover <ch@murgatroid.com mailto:ch@murgatroid.com >] Fixes CSV header, which was missing a column. #5353

    [Christopher Hoover <ch@murgatroid.com mailto:ch@murgatroid.com >] Remove "naked" logging of exceptions #5357

    [Jim Unroe <rock.unroe@gmail.com mailto:rock.unroe@gmail.com >] [kt8900d] Add MCU Version for Surecom KT8900D

    This patch adds an additional MCU version to support the
    Surecom KT8900D dual-band mobile radio.

    #5325



    _______________________________________________
    chirp_users mailing list
    chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com
    http://intrepid.danplanet.com/mailman/listinfo/chirp_users http://intrepid.danplanet.com/mailman/listinfo/chirp_users
    This message was sent to Chuck Hast at kp4djt@gmail.com mailto:kp4djt@gmail.com
    To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com

> 

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 Amateur Radio G8IFF W8IFF (was KC8NHF 9H3GN), e-mail nigel@ngunn.net www http://www.ngunn.net Member of ARRL, QRPARCI #11644, SOC #548, Flying Pigs QRP Club International #385, Dayton ARA #2128, AMSAT-NA LM-1691, GCARES, EAA382.