[chirp_users] Support for CS800D??
Hi Folks, I have not looked too much online, but it does not appear that anyone has setup the Chirp to work with the Connect System radios. I happen to have picked up the CS800D. Please correct me if I am wrong...
TNX Will WC2L
Will,
Chirp can only program analog radios. The CS800D is DMR so you need a code plug, which is a fairly complex configuration file. I'd suggest searching online for "cs800d ciodeplug" to locate one and learn more about DMR. I found one for my AT-868UV HT here and one for the CS800D code plug can be found at http://arrl-ohio.org/digital/kb8lkh.html and other sites.
Larry AC8YE
On Tue, Dec 25, 2018 at 10:23 PM William Liporace wc2l@wc2l.com wrote:
Hi Folks, I have not looked too much online, but it does not appear that anyone has setup the Chirp to work with the Connect System radios. I happen to have picked up the CS800D. Please correct me if I am wrong...
TNX Will WC2L
-- William Liporace WC2Lhttp://www.wc2l.com or http://dxc.wc2l.com AR-Cluster Node telnet dxc.wc2l.com or 144.93 MHzwc2l@wc2l.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to larry.howell.47@gmail.com at larry.howell.47@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Will,
It's late and I should have been more focused. The code plug I provided the link to is for OH and contains OH DMR repeaters and related info. You'd need one for your part of NY to get the DMR repeaters and local talk groups, and other relevant data for your area. There probably is a DMR club in your area that may provide a code plug and offer general help. If you go to the Connect Systems website you'll find software to allow editing code plug files and creating code plugs. Be warned: these files are somewhat complex and there's a steep learning curve to understand their contents.
Larry AC8YE
On Tue, Dec 25, 2018 at 11:33 PM Larry Howell larry.howell.47@gmail.com wrote:
Will,
Chirp can only program analog radios. The CS800D is DMR so you need a code plug, which is a fairly complex configuration file. I'd suggest searching online for "cs800d ciodeplug" to locate one and learn more about DMR. I found one for my AT-868UV HT here and one for the CS800D code plug can be found at http://arrl-ohio.org/digital/kb8lkh.html and other sites.
Larry AC8YE
On Tue, Dec 25, 2018 at 10:23 PM William Liporace wc2l@wc2l.com wrote:
Hi Folks, I have not looked too much online, but it does not appear that anyone has setup the Chirp to work with the Connect System radios. I happen to have picked up the CS800D. Please correct me if I am wrong...
TNX Will WC2L
-- William Liporace WC2Lhttp://www.wc2l.com or http://dxc.wc2l.com AR-Cluster Node telnet dxc.wc2l.com or 144.93 MHzwc2l@wc2l.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to larry.howell.47@gmail.com at larry.howell.47@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Good Morning,
Thanks for the info. I didn't look to see if other DMR radios were included or supported. Not a problem. I have the radio setup and I have a couple of codeplugs for the radio. I just liked the way that chirp works ;-)
TNX Will WC2L
On 12/25/2018 11:33 PM, Larry Howell wrote:
Will,
Chirp can only program analog radios. The CS800D is DMR so you need a code plug, which is a fairly complex configuration file. I'd suggest searching online for "cs800d ciodeplug" to locate one and learn more about DMR. I found one for my AT-868UV HT here and one for the CS800D code plug can be found at http://arrl-ohio.org/digital/kb8lkh.html and other sites.
Larry AC8YE
On Tue, Dec 25, 2018 at 10:23 PM William Liporace <wc2l@wc2l.com mailto:wc2l@wc2l.com> wrote:
Hi Folks, I have not looked too much online, but it does not appear that anyone has setup the Chirp to work with the Connect System radios. I happen to have picked up the CS800D. Please correct me if I am wrong... TNX Will WC2L -- William Liporace WC2L http://www.wc2l.com orhttp://dxc.wc2l.com AR-Cluster Node telnetdxc.wc2l.com <http://dxc.wc2l.com> or 144.93 MHz wc2l@wc2l.com <mailto:wc2l@wc2l.com> _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to larry.howell.47@gmail.com <mailto:larry.howell.47@gmail.com> at larry.howell.47@gmail.com <mailto:larry.howell.47@gmail.com> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com>
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to wc2l@wc2l.com at wc2l@wc2l.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (2)
-
Larry Howell -
William Liporace