Looks to me like your radio is not a UV-5R+ but rather a radio with 3 power levels like the BF-F8HP or UV-5RTP which would use BF-F8HP for the model selection.

You will have to download from this radio to get a compatible template and then either copy and paste the channels form another tab or import them. Then you will be able to upload.

Unless you have typos in your error message, there may be other things that might be required, too. If what I mentioned above doesn't work, attach a debug.log file.

Jim KC9HI

Jim KC9HI

On Fri, May 22, 2015 at 5:15 PM, Jim jsites9297@att.net wrote:

Am trying to program a uv5r+,have done many. I downloaded a cloned copy

of the radios program from the radio,copied the program I wish to install into the downloaded copy,but when I tried to upload it back to the radio,got an error report that stated "unsupported firmware version:NR-323F8HP-1". Any help is appreciated.Thank you. Jim Sites

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com