[chirp_users] Using Win 10 with Chirp?
Is there an update to allow me to use chirp with win 10 as I do not seem to be able to use it otherwise.
Mike Pludek. G0EQG/UK
Several people, including myself, have no problems with Windows 10. You don’t give any specifics, but I am guessing you have a Prolific cable and need to roll your driver back to 3.2.0.0. See www.miklor.com for more info.
Jardy Dawson WA7JRD Message sent through sub space hailing frequencies using the Universal Translator.
On Jul 5, 2018, at 00:48, Michael Pludek saltydognl@gmail.com wrote:
Is there an update to allow me to use chirp with win 10 as I do not seem to be able to use it otherwise.
Mike Pludek. G0EQG/UK _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On Thu, Jul 5, 2018 at 3:48 AM, Michael Pludek saltydognl@gmail.com wrote:
Is there an update to allow me to use chirp with win 10 as I do not seem to be able to use it otherwise.
Mike Pludek. G0EQG/UK
CHIRP has worked with Windows 10 since its original release in 2015. With the lack of detail provided, it is hard to recommend a solution. Here are some solutions for common problems.
1. The Windows SmartScreen Filter and been known to cause problems with CHIRP and other software. Disable it to see if the problem goes away.
2. Windows 10 has been famous for corrupting the CHIRP configuration file (chirp.config). When it gets corrupted, CHIRP won't launch. When this happens, just delete the chirp.config file and CHIRP will create a new one. Tip: The chirp.config file is stored in the same location as the debug.log file. This page shows you how to find the debug.log file. https://chirp.danplanet.com/projects/chirp/wiki/How_to_report_issues
Jim KC9HI
participants (3)
-
Jardy -
Jim Unroe -
Michael Pludek