Re: [chirp_users] cable for kenwood th-f7
Has anyone built an interface for an Icom IC-T7H, I've had one for years and programming it from the key pad is OK, just thought there might be something even easier
W2ZDP
why built a cable, i used the low cost cable for BAOFENG, work well, used the original kenwood program or CHIRP . i used this cable into the kenwood th-f7
bst 73 de Rudy - IW2BSF
i built a cable for my baofeng radio to avoid the annoying need to downgrade the driver for win7 and win10/ the new prolitic driver that is installed automatically is not compatible with clone prolitic chip driver 3.6.*.* should be downgraded to ver 3.2.0.0 to make the cheap cable work usb board was bought on aliexpress for 0.57$ free shipping
2016-01-24 22:08 GMT+02:00 IW2GJV via chirp_users < chirp_users@intrepid.danplanet.com>:
Has anyone built an interface for an Icom IC-T7H, I've had one for years and programming it from the key pad is OK, just thought there might be something even easier
W2ZDP
why built a cable, i used the low cost cable for BAOFENG, work well, used the original kenwood program or CHIRP . i used this cable into the kenwood th-f7
bst 73 de Rudy - IW2BSF
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Thanks for the tip, sounds much easier !!
-----Original Message----- From: IW2GJV via chirp_users <chirp_users@intrepid.danplanet.com> To: chirp_users <chirp_users@intrepid.danplanet.com> Sent: Sun, Jan 24, 2016 3:09 pm Subject: Re: [chirp_users] cable for kenwood th-f7
Has anyone built an interface for an Icom IC-T7H, I've had one for years and programming it from the key pad is OK, just thought there might be something even easier
W2ZDP
why built a cable, i used the low cost cable for BAOFENG, work well, used the original kenwood program or CHIRP . i used this cable into the kenwood th-f7
bst 73 de Rudy - IW2BSF
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Easier but you need to make sure the prolitic driver is not updated from ver 3,2,0,0! Building a cable solves the issue בתאריך 25 בינו' 2016 2:44 AM, "W2ZDP via chirp_users" < chirp_users@intrepid.danplanet.com> כתב:
Thanks for the tip, sounds much easier !!
-----Original Message----- From: IW2GJV via chirp_users chirp_users@intrepid.danplanet.com To: chirp_users chirp_users@intrepid.danplanet.com Sent: Sun, Jan 24, 2016 3:09 pm Subject: Re: [chirp_users] cable for kenwood th-f7
Has anyone built an interface for an Icom IC-T7H, I've had one for years and
programming it from the key pad is OK, just thought there might be something
even easier
W2ZDP
why built a cable, i used the low cost cable for BAOFENG, work well, used the
original kenwood program or CHIRP .
i used this cable into the kenwood th-f7
bst 73 de Rudy - IW2BSF
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (3)
-
Amnon Zohar -
IW2GJV -
sparks4151＠aol.com