[chirp_users] Yaesu FT70 DR
Will Chirp work on Yaesu FT70 DR and do you need special cable to hook up ?
Joe,
Here is the list of supported radios:
https://chirp.danplanet.com/projects/chirp/wiki/Supported_Radios
FT70D is listed but not the DR. Maybe take a look to see the differences? Probably the same or almost the same radio.
You will need a programming cable if your radio didn't come with one.
Thanks,
Bob KA1TTG
On Fri, Feb 12, 2021 at 2:34 PM Joe Waugh jcwaugh50@gmail.com wrote:
Will Chirp work on Yaesu FT70 DR and do you need special cable to hook up ?
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Bob at bobank03@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
It will work with the yaesu supplied cable, which is a straight USB to micro cable. If you use a third party cable be sure it fits into the radio correctly. Was tested with a FT 70DR (Europe)
Nicolas
On Fri, 12 Feb 2021 at 19:34, Joe Waugh jcwaugh50@gmail.com wrote:
Will Chirp work on Yaesu FT70 DR and do you need special cable to hook up ?
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nicolas at nicolas@jetblackjelly.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Yes.
On 12/02/2021 14:33 Joe Waugh jcwaugh50@gmail.com wrote:
Will Chirp work on Yaesu FT70 DR and do you need special cable to hook up ?
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net
participants (5)
-
Joe Waugh
-
Nicolas Pike
-
Nigel A. Gunn G8IFF/W8IFF
-
Robert Ankenbauer
-
W Paul Mills