Thanks,

Good start. Any pointers on how to dissect and add a protocol?

Note that the INSTALL lists python-support as package for Ubuntu, but it is not available in 18.04. python-future seems needed, so I installed it. With those two changes I was able to start chirpw. Shall I create a patch for INSTALL.txt, or is this too 18.04 specific?

TIA,

M4

Op 25-10-2020 om 23:07 schreef Nigel A. Gunn G8IFF/W8IFF:

Try here: https://chirp.danplanet.com/projects/chirp/wiki/DevelopersProcess

...

On 25/10/2020 15:27 Martijn Lievaart chirp@rtij.nl wrote:

Hi,

I would love to add kg833 support to Chirp, but I do not know where to start. Any pointers?

Regards,

M4

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net

Thanks,

Already made a feature request, but now also subscribed to the devel list and can continue.

Thx!

M4

Op 28-10-2020 om 23:25 schreef Tony Fuller:

If you haven't found it already, the main developer page is at https://chirp.danplanet.com/projects/chirp/wiki/Developers https://chirp.danplanet.com/projects/chirp/wiki/Developers There's some good information in the "Add_a_radio" page, specifically how to do usb sniffing under linux. Alternately you could use a serial port monitor and do the same thing as well, possibly with PortMon https://docs.microsoft.com/en-us/sysinternals/downloads/ https://docs.microsoft.com/en-us/sysinternals/downloads/portmonportmon https://docs.microsoft.com/en-us/sysinternals/downloads/portmon

Tony

*From:* chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com on behalf of Martijn Lievaart chirp@rtij.nl *Sent:* Monday, October 26, 2020 10:45:43 AM *To:* Discussion of CHIRP chirp_users@intrepid.danplanet.com *Subject:* Re: [chirp_users] Wouxun kg833 Thanks,

Good start. Any pointers on how to dissect and add a protocol?

Note that the INSTALL lists python-support as package for Ubuntu, but it is not available in 18.04. python-future seems needed, so I installed it. With those two changes I was able to start chirpw. Shall I create a patch for INSTALL.txt, or is this too 18.04 specific?

TIA,

M4

Op 25-10-2020 om 23:07 schreef Nigel A. Gunn G8IFF/W8IFF:

...

Try here: https://chirp.danplanet.com/projects/chirp/wiki/DevelopersProcess

...

On 25/10/2020 15:27 Martijn Lievaart chirp@rtij.nl wrote:

Hi,

I would love to add kg833 support to Chirp, but I do not know where to start. Any pointers?

Regards,

M4

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tony F at goldstar611@hotmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Martijn Lievaart at chirp@rtij.nl To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com