[chirp_users] Loop back
When I look at my port for my cable to load my UV-5R
It states "This port appears to be a cable without Echo Loopback"
Is this a possible cause of me not being able to write to my radio?
Thanks
N5PLW Clif — Sent from Mailbox
No. This is normal.
Jim KC9HI
On Thu, May 15, 2014 at 10:27 PM, Clif Wright wretsub@gmail.com wrote:
When I look at my port for my cable to load my UV-5R
It states "This port appears to be a cable without Echo Loopback"
Is this a possible cause of me not being able to write to my radio?
Thanks
N5PLW Clif — Sent from Mailbox https://www.dropbox.com/mailbox
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
I've never seen that message. You probably have Echolink installed What's your operating system and cable type ? Prolific or FTDI ?
On Fri, May 16, 2014 at 7:44 AM, Jim Unroe rock.unroe@gmail.com wrote:
No. This is normal.
Jim KC9HI
On Thu, May 15, 2014 at 10:27 PM, Clif Wright wretsub@gmail.com wrote:
When I look at my port for my cable to load my UV-5R
It states "This port appears to be a cable without Echo Loopback"
Is this a possible cause of me not being able to write to my radio?
Thanks
N5PLW Clif — Sent from Mailbox https://www.dropbox.com/mailbox
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
My cable is a Black cable that I got from MTC where I got the radios. There is no name on the cable, but I believe that it is a Prolific. I have 18 radios to program and it has been 2 days with this problem.
I have used the Live disk and tried running this program from my harddrive. I am running Windows 7 home addition and the people at the store said that there was a problem, but there was a work around but the guy that know how to do it is at Hamfest in Dayton this weekend....great..
At one point, it was starting the cloning process when I tried to load from the radio, but would never load the spreadsheet from the radio.
Any help would be appreciated in solving this problem. If you have teamviewer, ( a free program to remotely operate a computer) (www.teamviewer.com), I am willing to let anyone look at my computer while I run the program...
Thanks in advance....
Clif Wright wretsub@gmail.com
wretsub@hotmail.com Home phone 817 819 7246
Date: Fri, 16 May 2014 14:43:11 -0400 From: thecanesvenatici@gmail.com To: chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] Loop back
I've never seen that message. You probably have Echolink installed What's your operating system and cable type ? Prolific or FTDI ?
On Fri, May 16, 2014 at 7:44 AM, Jim Unroe rock.unroe@gmail.com wrote:
No. This is normal. Jim KC9HI
On Thu, May 15, 2014 at 10:27 PM, Clif Wright wretsub@gmail.com wrote:
When I look at my port for my cable to load my UV-5R
It states "This port appears to be a cable without Echo Loopback"
Is this a possible cause of me not being able to write to my radio?
Thanks
N5PLW Clif— Sent from Mailbox
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
Clif,
The workaround is to install the v3.2.0.0 driver per the instructions on the miklor.com website which I provided a link to in another post.
Jim KC9HI
p.s. I'm in Dayton for the Hamvention, too.
On Fri, May 16, 2014 at 2:57 PM, Clif Wright wretsub@hotmail.com wrote:
My cable is a Black cable that I got from MTC where I got the radios. There is no name on the cable, but I believe that it is a Prolific. I have 18 radios to program and it has been 2 days with this problem.
I have used the Live disk and tried running this program from my harddrive. I am running Windows 7 home addition and the people at the store said that there was a problem, but there was a work around but the guy that know how to do it is at Hamfest in Dayton this weekend....great..
At one point, it was starting the cloning process when I tried to load from the radio, but would never load the spreadsheet from the radio.
Any help would be appreciated in solving this problem. If you have teamviewer, ( a free program to remotely operate a computer) ( www.teamviewer.com), I am willing to let anyone look at my computer while I run the program...
Thanks in advance....
Clif Wright wretsub@gmail.com wretsub@hotmail.com Home phone 817 819 7246
Yeh if the chip is Prolific go to http://www.miklor.com/COM/UV_Drivers.phpand read how to install and verify the 3.2.0.0 driver. Then scroll down to the hyperlink to download the driver. Let us know.
On Fri, May 16, 2014 at 4:29 PM, Jim Unroe rock.unroe@gmail.com wrote:
Clif,
The workaround is to install the v3.2.0.0 driver per the instructions on the miklor.com website which I provided a link to in another post.
Jim KC9HI
p.s. I'm in Dayton for the Hamvention, too.
On Fri, May 16, 2014 at 2:57 PM, Clif Wright wretsub@hotmail.com wrote:
My cable is a Black cable that I got from MTC where I got the radios. There is no name on the cable, but I believe that it is a Prolific. I have 18 radios to program and it has been 2 days with this problem.
I have used the Live disk and tried running this program from my harddrive. I am running Windows 7 home addition and the people at the store said that there was a problem, but there was a work around but the guy that know how to do it is at Hamfest in Dayton this weekend....great..
At one point, it was starting the cloning process when I tried to load from the radio, but would never load the spreadsheet from the radio.
Any help would be appreciated in solving this problem. If you have teamviewer, ( a free program to remotely operate a computer) ( www.teamviewer.com), I am willing to let anyone look at my computer while I run the program...
Thanks in advance....
Clif Wright wretsub@gmail.com wretsub@hotmail.com Home phone 817 819 7246
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
Thanks Milton,
I think I have loaded the driver and seems to be working.
Just can not load the freq's. Almost there :)
Clif Wright 817.819.7246 Or 940.463.5552 wretsub@yahoo.com
Binary is as easy as 01, 10, 11….and that is my 10 cents worth of information!!
On May 17, 2014, at 5:48 PM, Milton thecanesvenatici@gmail.com wrote:
Yeh if the chip is Prolific go to http://www.miklor.com/COM/UV_Drivers.php and read how to install and verify the 3.2.0.0 driver. Then scroll down to the hyperlink to download the driver. Let us know.
On Fri, May 16, 2014 at 4:29 PM, Jim Unroe rock.unroe@gmail.com wrote: Clif,
The workaround is to install the v3.2.0.0 driver per the instructions on the miklor.com website which I provided a link to in another post.
Jim KC9HI
p.s. I'm in Dayton for the Hamvention, too.
On Fri, May 16, 2014 at 2:57 PM, Clif Wright wretsub@hotmail.com wrote: My cable is a Black cable that I got from MTC where I got the radios. There is no name on the cable, but I believe that it is a Prolific. I have 18 radios to program and it has been 2 days with this problem.
I have used the Live disk and tried running this program from my harddrive. I am running Windows 7 home addition and the people at the store said that there was a problem, but there was a work around but the guy that know how to do it is at Hamfest in Dayton this weekend....great..
At one point, it was starting the cloning process when I tried to load from the radio, but would never load the spreadsheet from the radio.
Any help would be appreciated in solving this problem. If you have teamviewer, ( a free program to remotely operate a computer) (www.teamviewer.com), I am willing to let anyone look at my computer while I run the program...
Thanks in advance....
Clif Wright wretsub@gmail.com wretsub@hotmail.com Home phone 817 819 7246
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
Download from the radio first to develop a template that the radio will understand when you modify it and send it back to the radio. Baofeng radios seems to be particular on wanting you to download first, modify and then upload. Keep us all up to date on your progress.
Milton.
On Sun, May 18, 2014 at 11:44 AM, Clif Wright wretsub@yahoo.com wrote:
Thanks Milton,
I think I have loaded the driver and seems to be working.
Just can not load the freq's. Almost there :)
Clif Wright 817.819.7246 Or 940.463.5552 wretsub@yahoo.com
*Binary is as easy as 01, 10, 11….and that is my 10 cents worth of information!!*
On May 17, 2014, at 5:48 PM, Milton thecanesvenatici@gmail.com wrote:
Yeh if the chip is Prolific go to http://www.miklor.com/COM/UV_Drivers.phpand read how to install and verify the 3.2.0.0 driver. Then scroll down to the hyperlink to download the driver. Let us know.
On Fri, May 16, 2014 at 4:29 PM, Jim Unroe rock.unroe@gmail.com wrote:
Clif,
The workaround is to install the v3.2.0.0 driver per the instructions on the miklor.com website which I provided a link to in another post.
Jim KC9HI
p.s. I'm in Dayton for the Hamvention, too.
On Fri, May 16, 2014 at 2:57 PM, Clif Wright wretsub@hotmail.com wrote:
My cable is a Black cable that I got from MTC where I got the radios. There is no name on the cable, but I believe that it is a Prolific. I have 18 radios to program and it has been 2 days with this problem.
I have used the Live disk and tried running this program from my harddrive. I am running Windows 7 home addition and the people at the store said that there was a problem, but there was a work around but the guy that know how to do it is at Hamfest in Dayton this weekend....great..
At one point, it was starting the cloning process when I tried to load from the radio, but would never load the spreadsheet from the radio.
Any help would be appreciated in solving this problem. If you have teamviewer, ( a free program to remotely operate a computer) ( www.teamviewer.com), I am willing to let anyone look at my computer while I run the program...
Thanks in advance....
Clif Wright wretsub@gmail.com wretsub@hotmail.com Home phone 817 819 7246
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
participants (5)
-
Clif Wright -
Clif Wright -
Clif Wright -
Jim Unroe -
Milton