[chirp_users] Chirp and Icom IC-7200
Ok so I am wanting to use chirp to upload memories to my Icom IC-7200 Amateur Radio. Now the IC-7200 has a USB and a CIV connection. My understanding is that the USB should work, But I cannot seem to get it to work. I do not have a CIV cable. So does anyone have any experience with the IC-7200? Can I use the USB connection to upload memories? Or am I going to need a CIV cable? Thanks Bill
Ok got an answer to my question. Yes you can upload memories using USB. So the problem appears to be with Chirp? It will not read from the radio. Anyone with any experience using Chirp with an IC-7200? Trying to make this work. Thank You in advance for your help Bill
On 1/18/2016 1:31 AM, Bill wrote:
Ok so I am wanting to use chirp to upload memories to my Icom IC-7200 Amateur Radio. Now the IC-7200 has a USB and a CIV connection. My understanding is that the USB should work, But I cannot seem to get it to work. I do not have a CIV cable. So does anyone have any experience with the IC-7200? Can I use the USB connection to upload memories? Or am I going to need a CIV cable? Thanks Bill
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
So I am getting the following message when downloading from radio.
"The Icom 7200 operates in live mode. This means that any changes you make are immediately sent to the radio. Because of this, you cannot perform the Save or Upload operations. If you wish to edit the contents offline, please Export to a CSV file, using the File menu."
It seems to recognize that there are 199 memories. And the columns change to only show Frequency, Mode and Tune Step. But it is not pulling any Freq info off of the radio. I currently have about 20 or so memories filled on the radio.
So everything is greyed out in the main window. I try to File-->Export. It asks for me to name the file. Then the "Export to File" window pops up. Everything is greyed out there too. When I click OK the "Export to File" window just goes away. It does not make a CSV file? So the program will not export anything to CSV. I am assuming because there is nothing to export because Chirp is not getting that info from the radio. I am at a loss at the moment. If anyone has any idea what to do here I would greatly appreciate it. Thank You Bill
On 1/18/2016 6:52 AM, Bill wrote:
Ok got an answer to my question. Yes you can upload memories using USB. So the problem appears to be with Chirp? It will not read from the radio. Anyone with any experience using Chirp with an IC-7200? Trying to make this work. Thank You in advance for your help Bill
On 1/18/2016 1:31 AM, Bill wrote:
Ok so I am wanting to use chirp to upload memories to my Icom IC-7200 Amateur Radio. Now the IC-7200 has a USB and a CIV connection. My understanding is that the USB should work, But I cannot seem to get it to work. I do not have a CIV cable. So does anyone have any experience with the IC-7200? Can I use the USB connection to upload memories? Or am I going to need a CIV cable? Thanks Bill
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
I have an ic7200 at home and I'll try this evening (UTC+1 time) .... stay tuned.
73 de IZ3GME Marco
On 18/01/2016 13:52, Bill wrote:
Ok got an answer to my question. Yes you can upload memories using USB. So the problem appears to be with Chirp? It will not read from the radio. Anyone with any experience using Chirp with an IC-7200? Trying to make this work. Thank You in advance for your help Bill
On 1/18/2016 1:31 AM, Bill wrote:
Ok so I am wanting to use chirp to upload memories to my Icom IC-7200 Amateur Radio. Now the IC-7200 has a USB and a CIV connection. My understanding is that the USB should work, But I cannot seem to get it to work. I do not have a CIV cable. So does anyone have any experience with the IC-7200? Can I use the USB connection to upload memories? Or am I going to need a CIV cable? Thanks Bill
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Ok Marco Thanks
On 1/18/2016 7:19 AM, Marco Filippi IZ3GME wrote:
I have an ic7200 at home and I'll try this evening (UTC+1 time) .... stay tuned.
73 de IZ3GME Marco
On 18/01/2016 13:52, Bill wrote:
Ok got an answer to my question. Yes you can upload memories using USB. So the problem appears to be with Chirp? It will not read from the radio. Anyone with any experience using Chirp with an IC-7200? Trying to make this work. Thank You in advance for your help Bill
On 1/18/2016 1:31 AM, Bill wrote:
Ok so I am wanting to use chirp to upload memories to my Icom IC-7200 Amateur Radio. Now the IC-7200 has a USB and a CIV connection. My understanding is that the USB should work, But I cannot seem to get it to work. I do not have a CIV cable. So does anyone have any experience with the IC-7200? Can I use the USB connection to upload memories? Or am I going to need a CIV cable? Thanks Bill
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
It has been hit and miss for me. When it does work it loads all the memories I have already stored as FM mode and I can't change it. I've been meaning to fix it but haven't had a chance yet.
On Mon, Jan 18, 2016 at 7:52 AM, Bill billsspot@bellsouth.net wrote:
Ok got an answer to my question. Yes you can upload memories using USB. So the problem appears to be with Chirp? It will not read from the radio. Anyone with any experience using Chirp with an IC-7200? Trying to make this work. Thank You in advance for your help Bill
On 1/18/2016 1:31 AM, Bill wrote:
Ok so I am wanting to use chirp to upload memories to my Icom IC-7200 Amateur Radio. Now the IC-7200 has a USB and a CIV connection. My understanding is that the USB should work, But I cannot seem to get it to work. I do not have a CIV cable. So does anyone have any experience with the IC-7200? Can I use the USB connection to upload memories? Or am I going to need a CIV cable? Thanks Bill
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
So it doesn't matter what I do it's not gonna work? The website says it supports the IC-7200? I am banging my head on the wall over here lol :) Bill
On 1/18/2016 7:19 AM, Ryan Tourge wrote:
It has been hit and miss for me. When it does work it loads all the memories I have already stored as FM mode and I can't change it. I've been meaning to fix it but haven't had a chance yet.
On Mon, Jan 18, 2016 at 7:52 AM, Bill billsspot@bellsouth.net wrote:
Ok got an answer to my question. Yes you can upload memories using USB. So the problem appears to be with Chirp? It will not read from the radio. Anyone with any experience using Chirp with an IC-7200? Trying to make this work. Thank You in advance for your help Bill
On 1/18/2016 1:31 AM, Bill wrote:
Ok so I am wanting to use chirp to upload memories to my Icom IC-7200 Amateur Radio. Now the IC-7200 has a USB and a CIV connection. My understanding is that the USB should work, But I cannot seem to get it to work. I do not have a CIV cable. So does anyone have any experience with the IC-7200? Can I use the USB connection to upload memories? Or am I going to need a CIV cable? Thanks Bill
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
First bunch of test done, I have some detail: - 7200 is (supposed to be) supported - communication through usb cable is possible, no need for serial CIV interface - chirp can recognize 7200 during icom autodetect, this confirm it can communicate with radio - it does not get any answer from radio when requesting memories
So, yes sir we have a bug.
I start debugging this now, please open a bug issue on chirp site in this while so we can trace it.
73 de IZ3GME Marco
On 18/01/2016 14:28, Bill wrote:
So it doesn't matter what I do it's not gonna work? The website says it supports the IC-7200? I am banging my head on the wall over here lol :) Bill
On 1/18/2016 7:19 AM, Ryan Tourge wrote:
It has been hit and miss for me. When it does work it loads all the memories I have already stored as FM mode and I can't change it. I've been meaning to fix it but haven't had a chance yet.
On Mon, Jan 18, 2016 at 7:52 AM, Billbillsspot@bellsouth.net wrote:
Ok got an answer to my question. Yes you can upload memories using USB. So the problem appears to be with Chirp? It will not read from the radio. Anyone with any experience using Chirp with an IC-7200? Trying to make this work. Thank You in advance for your help Bill
On 1/18/2016 1:31 AM, Bill wrote:
Ok so I am wanting to use chirp to upload memories to my Icom IC-7200 Amateur Radio. Now the IC-7200 has a USB and a CIV connection. My understanding is that the USB should work, But I cannot seem to get it to work. I do not have a CIV cable. So does anyone have any experience with the IC-7200? Can I use the USB connection to upload memories? Or am I going to need a CIV cable? Thanks Bill
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email tochirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Bug issue reported Marco :)
On 1/18/2016 11:42 AM, Marco IZ3GME wrote:
First bunch of test done, I have some detail:
- 7200 is (supposed to be) supported
- communication through usb cable is possible, no need for serial CIV
interface
- chirp can recognize 7200 during icom autodetect, this confirm it can
communicate with radio
- it does not get any answer from radio when requesting memories
So, yes sir we have a bug.
I start debugging this now, please open a bug issue on chirp site in this while so we can trace it.
73 de IZ3GME Marco
On 18/01/2016 14:28, Bill wrote:
So it doesn't matter what I do it's not gonna work? The website says it supports the IC-7200? I am banging my head on the wall over here lol :) Bill
On 1/18/2016 7:19 AM, Ryan Tourge wrote:
It has been hit and miss for me. When it does work it loads all the memories I have already stored as FM mode and I can't change it. I've been meaning to fix it but haven't had a chance yet.
On Mon, Jan 18, 2016 at 7:52 AM, Billbillsspot@bellsouth.net wrote:
Ok got an answer to my question. Yes you can upload memories using USB. So the problem appears to be with Chirp? It will not read from the radio. Anyone with any experience using Chirp with an IC-7200? Trying to make this work. Thank You in advance for your help Bill
On 1/18/2016 1:31 AM, Bill wrote:
Ok so I am wanting to use chirp to upload memories to my Icom IC-7200 Amateur Radio. Now the IC-7200 has a USB and a CIV connection. My understanding is that the USB should work, But I cannot seem to get it to work. I do not have a CIV cable. So does anyone have any experience with the IC-7200? Can I use the USB connection to upload memories? Or am I going to need a CIV cable? Thanks Bill
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email tochirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Marco,
I made several recent changes to the Icom CI-V driver and probably introduced the bug. I have an IC-7000 and wasn't able to test my changes against an IC-7200.
Let me know what I can do.
-- wireless Joseph.P.Scanlan@n7xsd.us +1-702-896-0507 -- work Joseph.P.Scanlan@ClarkCountyNV.gov +1-702-455-3679
Never mind Joseph, I'm already testing the patch.
It's the skip support BTW
73 de IZ3GME Marco
On 19/01/2016 01:48, Joseph scanlan wrote:
Marco,
I made several recent changes to the Icom CI-V driver and probably introduced the bug. I have an IC-7000 and wasn't able to test my changes against an IC-7200.
Let me know what I can do.
-- wireless <Joseph.P.Scanlan@n7xsd.us mailto:Joseph.P.Scanlan@n7xsd.us> +1-702-896-0507 -- work <Joseph.P.Scanlan@ClarkCountyNV.gov
mailto:Joseph.P.Scanlan@clarkcountynv.gov> +1-702-455-3679
These mechanics and mathematics they give me comfort when I'm afraid. —Venus Hum
On Jan 18, 2016, at 3:24 PM, Bill <billsspot@bellsouth.net mailto:billsspot@bellsouth.net> wrote:
Bug issue reported Marco :)
On 1/18/2016 11:42 AM, Marco IZ3GME wrote:
First bunch of test done, I have some detail:
- 7200 is (supposed to be) supported
- communication through usb cable is possible, no need for serial CIV
interface
- chirp can recognize 7200 during icom autodetect, this confirm it can
communicate with radio
- it does not get any answer from radio when requesting memories
So, yes sir we have a bug.
I start debugging this now, please open a bug issue on chirp site in this while so we can trace it.
73 de IZ3GME Marco
On 18/01/2016 14:28, Bill wrote:
So it doesn't matter what I do it's not gonna work? The website says it supports the IC-7200? I am banging my head on the wall over here lol :) Bill
On 1/18/2016 7:19 AM, Ryan Tourge wrote:
It has been hit and miss for me. When it does work it loads all the memories I have already stored as FM mode and I can't change it. I've been meaning to fix it but haven't had a chance yet.
On Mon, Jan 18, 2016 at 7:52 AM, Bill<billsspot@bellsouth.net mailto:billsspot@bellsouth.net> wrote:
Ok got an answer to my question. Yes you can upload memories using USB. So the problem appears to be with Chirp? It will not read from the radio. Anyone with any experience using Chirp with an IC-7200? Trying to make this work. Thank You in advance for your help Bill
On 1/18/2016 1:31 AM, Bill wrote: > Ok so I am wanting to use chirp to upload memories to my Icom IC-7200 > Amateur Radio. Now the IC-7200 has a USB and a CIV connection. My > understanding is that the USB should work, But I cannot seem to > get it > to work. I do not have a CIV cable. So does anyone have any > experience > with the IC-7200? Can I use the USB connection to upload > memories? Or am > I going to need a CIV cable? > Thanks Bill > > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > mailto:chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email tochirp_users-unsubscribe@intrepid.danplanet.com mailto:tochirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Hi Bill you probably noticed that I updated the issue, the updated driver for 7200 should be included in next daily build. Other then just fix it I also added support for per memory digital flag and filter width, you'll find them in memory editor (right click on memory, properties -> "Other" tab)
During tests I had some communication problem with radio; to have a stable communication I had to set on radio CI-V BAUD RATE to 19200, when set to Auto it works inconsitently. Once you'll get the new version please try setting Auto and let me know if it works for you.
73 de IZ3GME Marco
On 19/01/2016 00:24, Bill wrote:
Bug issue reported Marco :)
On 1/18/2016 11:42 AM, Marco IZ3GME wrote:
First bunch of test done, I have some detail:
- 7200 is (supposed to be) supported
- communication through usb cable is possible, no need for serial CIV
interface
- chirp can recognize 7200 during icom autodetect, this confirm it can
communicate with radio
- it does not get any answer from radio when requesting memories
So, yes sir we have a bug.
I start debugging this now, please open a bug issue on chirp site in this while so we can trace it.
73 de IZ3GME Marco
On 18/01/2016 14:28, Bill wrote:
So it doesn't matter what I do it's not gonna work? The website says it supports the IC-7200? I am banging my head on the wall over here lol :) Bill
On 1/18/2016 7:19 AM, Ryan Tourge wrote:
It has been hit and miss for me. When it does work it loads all the memories I have already stored as FM mode and I can't change it. I've been meaning to fix it but haven't had a chance yet.
On Mon, Jan 18, 2016 at 7:52 AM, Billbillsspot@bellsouth.net wrote:
Ok got an answer to my question. Yes you can upload memories using USB. So the problem appears to be with Chirp? It will not read from the radio. Anyone with any experience using Chirp with an IC-7200? Trying to make this work. Thank You in advance for your help Bill
On 1/18/2016 1:31 AM, Bill wrote:
Ok so I am wanting to use chirp to upload memories to my Icom IC-7200 Amateur Radio. Now the IC-7200 has a USB and a CIV connection. My understanding is that the USB should work, But I cannot seem to get it to work. I do not have a CIV cable. So does anyone have any experience with the IC-7200? Can I use the USB connection to upload memories? Or am I going to need a CIV cable? Thanks Bill
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email tochirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
That was fast! Thank You Marco for fixing that so quickly. I was actually going to ask if the flags for filter width could be added. I was going to wait until the driver was fixed first. You beat me to it :) I will let you know how it works out. 73 Bill ke4wkp
On 1/20/2016 3:42 AM, IZ3GME Marco wrote:
Hi Bill you probably noticed that I updated the issue, the updated driver for 7200 should be included in next daily build. Other then just fix it I also added support for per memory digital flag and filter width, you'll find them in memory editor (right click on memory, properties -> "Other" tab)
During tests I had some communication problem with radio; to have a stable communication I had to set on radio CI-V BAUD RATE to 19200, when set to Auto it works inconsitently. Once you'll get the new version please try setting Auto and let me know if it works for you.
73 de IZ3GME Marco
On 19/01/2016 00:24, Bill wrote:
Bug issue reported Marco :)
On 1/18/2016 11:42 AM, Marco IZ3GME wrote:
First bunch of test done, I have some detail:
- 7200 is (supposed to be) supported
- communication through usb cable is possible, no need for serial CIV
interface
- chirp can recognize 7200 during icom autodetect, this confirm it can
communicate with radio
- it does not get any answer from radio when requesting memories
So, yes sir we have a bug.
I start debugging this now, please open a bug issue on chirp site in this while so we can trace it.
73 de IZ3GME Marco
On 18/01/2016 14:28, Bill wrote:
So it doesn't matter what I do it's not gonna work? The website says it supports the IC-7200? I am banging my head on the wall over here lol :) Bill
On 1/18/2016 7:19 AM, Ryan Tourge wrote:
It has been hit and miss for me. When it does work it loads all the memories I have already stored as FM mode and I can't change it. I've been meaning to fix it but haven't had a chance yet.
On Mon, Jan 18, 2016 at 7:52 AM, Billbillsspot@bellsouth.net wrote:
Ok got an answer to my question. Yes you can upload memories using USB. So the problem appears to be with Chirp? It will not read from the radio. Anyone with any experience using Chirp with an IC-7200? Trying to make this work. Thank You in advance for your help Bill
On 1/18/2016 1:31 AM, Bill wrote: > Ok so I am wanting to use chirp to upload memories to my Icom IC-7200 > Amateur Radio. Now the IC-7200 has a USB and a CIV connection. My > understanding is that the USB should work, But I cannot seem to get it > to work. I do not have a CIV cable. So does anyone have any experience > with the IC-7200? Can I use the USB connection to upload memories? Or am > I going to need a CIV cable? > Thanks Bill > > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email tochirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Hi Marco I wanted to report back to you now that I have had a chance to try the chirp update. I am having no trouble with communication whether on Auto or 19200. Thank You again for fixing this issue. It make programming memories a lot easier. Bill
On 1/20/2016 3:42 AM, IZ3GME Marco wrote:
Hi Bill you probably noticed that I updated the issue, the updated driver for 7200 should be included in next daily build. Other then just fix it I also added support for per memory digital flag and filter width, you'll find them in memory editor (right click on memory, properties -> "Other" tab)
During tests I had some communication problem with radio; to have a stable communication I had to set on radio CI-V BAUD RATE to 19200, when set to Auto it works inconsitently. Once you'll get the new version please try setting Auto and let me know if it works for you.
73 de IZ3GME Marco
On 19/01/2016 00:24, Bill wrote:
Bug issue reported Marco :)
On 1/18/2016 11:42 AM, Marco IZ3GME wrote:
First bunch of test done, I have some detail:
- 7200 is (supposed to be) supported
- communication through usb cable is possible, no need for serial CIV
interface
- chirp can recognize 7200 during icom autodetect, this confirm it can
communicate with radio
- it does not get any answer from radio when requesting memories
So, yes sir we have a bug.
I start debugging this now, please open a bug issue on chirp site in this while so we can trace it.
73 de IZ3GME Marco
On 18/01/2016 14:28, Bill wrote:
So it doesn't matter what I do it's not gonna work? The website says it supports the IC-7200? I am banging my head on the wall over here lol :) Bill
On 1/18/2016 7:19 AM, Ryan Tourge wrote:
It has been hit and miss for me. When it does work it loads all the memories I have already stored as FM mode and I can't change it. I've been meaning to fix it but haven't had a chance yet.
On Mon, Jan 18, 2016 at 7:52 AM, Billbillsspot@bellsouth.net wrote:
Ok got an answer to my question. Yes you can upload memories using USB. So the problem appears to be with Chirp? It will not read from the radio. Anyone with any experience using Chirp with an IC-7200? Trying to make this work. Thank You in advance for your help Bill
On 1/18/2016 1:31 AM, Bill wrote: > Ok so I am wanting to use chirp to upload memories to my Icom IC-7200 > Amateur Radio. Now the IC-7200 has a USB and a CIV connection. My > understanding is that the USB should work, But I cannot seem to get it > to work. I do not have a CIV cable. So does anyone have any experience > with the IC-7200? Can I use the USB connection to upload memories? Or am > I going to need a CIV cable? > Thanks Bill > > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email tochirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
I too ran the update and it now works! Awesome!
Thank you so much, it was so hard to program all thos channels by hand.
George Mulak
On 02/08/2016 05:46 PM, Bill wrote:
Hi Marco I wanted to report back to you now that I have had a chance to try the chirp update. I am having no trouble with communication whether on Auto or 19200. Thank You again for fixing this issue. It make programming memories a lot easier. Bill
On 1/20/2016 3:42 AM, IZ3GME Marco wrote:
Hi Bill you probably noticed that I updated the issue, the updated driver for 7200 should be included in next daily build. Other then just fix it I also added support for per memory digital flag and filter width, you'll find them in memory editor (right click on memory, properties -> "Other" tab)
During tests I had some communication problem with radio; to have a stable communication I had to set on radio CI-V BAUD RATE to 19200, when set to Auto it works inconsitently. Once you'll get the new version please try setting Auto and let me know if it works for you.
73 de IZ3GME Marco
On 19/01/2016 00:24, Bill wrote:
Bug issue reported Marco :)
On 1/18/2016 11:42 AM, Marco IZ3GME wrote:
First bunch of test done, I have some detail:
- 7200 is (supposed to be) supported
- communication through usb cable is possible, no need for serial CIV
interface
- chirp can recognize 7200 during icom autodetect, this confirm it can
communicate with radio
- it does not get any answer from radio when requesting memories
So, yes sir we have a bug.
I start debugging this now, please open a bug issue on chirp site in this while so we can trace it.
73 de IZ3GME Marco
On 18/01/2016 14:28, Bill wrote:
So it doesn't matter what I do it's not gonna work? The website says it supports the IC-7200? I am banging my head on the wall over here lol :) Bill
On 1/18/2016 7:19 AM, Ryan Tourge wrote:
It has been hit and miss for me. When it does work it loads all the memories I have already stored as FM mode and I can't change it. I've been meaning to fix it but haven't had a chance yet.
On Mon, Jan 18, 2016 at 7:52 AM, Billbillsspot@bellsouth.net wrote:
> Ok got an answer to my question. Yes you can upload memories using USB. > So the problem appears to be with Chirp? It will not read from the > radio. Anyone with any experience using Chirp with an IC-7200? Trying to > make this work. > Thank You in advance for your help > Bill > > > On 1/18/2016 1:31 AM, Bill wrote: >> Ok so I am wanting to use chirp to upload memories to my Icom IC-7200 >> Amateur Radio. Now the IC-7200 has a USB and a CIV connection. My >> understanding is that the USB should work, But I cannot seem to get it >> to work. I do not have a CIV cable. So does anyone have any experience >> with the IC-7200? Can I use the USB connection to upload memories? Or am >> I going to need a CIV cable? >> Thanks Bill >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users@intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> To unsubscribe, send an email to > chirp_users-unsubscribe@intrepid.danplanet.com > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > To unsubscribe, send an email to > chirp_users-unsubscribe@intrepid.danplanet.com > _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email tochirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to %(user_address)s To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Marco, Just so you know something has changed since the latest updates. I now have to put the radio in 19200 to get it to work. Not a big deal. I just wanted to let you know. Since you wanted my input. Thanks again Marco for your work on Chirp :) Bill
On 1/20/2016 3:42 AM, IZ3GME Marco wrote:
Hi Bill you probably noticed that I updated the issue, the updated driver for 7200 should be included in next daily build. Other then just fix it I also added support for per memory digital flag and filter width, you'll find them in memory editor (right click on memory, properties -> "Other" tab)
During tests I had some communication problem with radio; to have a stable communication I had to set on radio CI-V BAUD RATE to 19200, when set to Auto it works inconsitently. Once you'll get the new version please try setting Auto and let me know if it works for you.
73 de IZ3GME Marco
On 19/01/2016 00:24, Bill wrote:
Bug issue reported Marco :)
On 1/18/2016 11:42 AM, Marco IZ3GME wrote:
First bunch of test done, I have some detail:
- 7200 is (supposed to be) supported
- communication through usb cable is possible, no need for serial CIV
interface
- chirp can recognize 7200 during icom autodetect, this confirm it can
communicate with radio
- it does not get any answer from radio when requesting memories
So, yes sir we have a bug.
I start debugging this now, please open a bug issue on chirp site in this while so we can trace it.
73 de IZ3GME Marco
On 18/01/2016 14:28, Bill wrote:
So it doesn't matter what I do it's not gonna work? The website says it supports the IC-7200? I am banging my head on the wall over here lol :) Bill
On 1/18/2016 7:19 AM, Ryan Tourge wrote:
It has been hit and miss for me. When it does work it loads all the memories I have already stored as FM mode and I can't change it. I've been meaning to fix it but haven't had a chance yet.
On Mon, Jan 18, 2016 at 7:52 AM, Billbillsspot@bellsouth.net wrote:
Ok got an answer to my question. Yes you can upload memories using USB. So the problem appears to be with Chirp? It will not read from the radio. Anyone with any experience using Chirp with an IC-7200? Trying to make this work. Thank You in advance for your help Bill
On 1/18/2016 1:31 AM, Bill wrote: > Ok so I am wanting to use chirp to upload memories to my Icom IC-7200 > Amateur Radio. Now the IC-7200 has a USB and a CIV connection. My > understanding is that the USB should work, But I cannot seem to get it > to work. I do not have a CIV cable. So does anyone have any experience > with the IC-7200? Can I use the USB connection to upload memories? Or am > I going to need a CIV cable? > Thanks Bill > > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email tochirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (7)
-
Bill -
George Mulak -
IZ3GME Marco -
Joseph scanlan -
Marco Filippi IZ3GME
-
Marco IZ3GME
-
Ryan Tourge