[chirp_users] still having trouble with software/drivers for Icom 2200H
I took some screenshots and placed them in a Google doc. Let me know what else I should hunt down/share.
I'm missing something in the setup, but I am committed to figuring this out.
Many thanks to John and Todd for their swift replies.
Seth
https://docs.google.com/presentation/d/1YHJe_5627oxRuNwJa2Pbo8DoLuxCJpo54kgt...
On Thu, Jan 29, 2015 at 9:11 PM, KB1PWN KB1PWN kb1pwn@gmail.com wrote:
1. Downgrade your driver to v3.2.0.0
http://www.miklor.com/COM/UV_Drivers.php
2. Disable SmartScreen
http://www.miklor.com/COM/UV_CHIRP.php#LoadingCHIRP
Jim KC9HI
Well,that kind of worked! I did what you suggested below.and it seemed to download fine,but none of my custom settings showed up.It did my name,turn off lights I didn't want on,and such,but I have Location 1-14 named FRS and programmed for the FRS channels(my group works off of these) but none show up on the screen.I have done other radios and as soon as I program them,the FRS channel one comes up on the screen.Don't know if I am doing something wrong or what.Thanks again for your help.
----- Original Message ----- From: "Jim Unroe" rock.unroe@gmail.com To: "Discussion of CHIRP" chirp_users@intrepid.danplanet.com Sent: Thursday, January 29, 2015 8:15 PM Subject: Re: [chirp_users] still having trouble with software/drivers forIcom 2200H
On Thu, Jan 29, 2015 at 10:04 PM, Jim jsites9297@att.net wrote:
Jim,
Which radio are you programming? The original post is about an Icom 2200H. My research indicates that is is VHF only.
Jim KC9HI
Seth,
Two thoughts immediately come to mind:
1) The driver you are using needs to be backdated to Prolific 3.2.0.0 If you are using a ‘cloned’ generic cable as many do, Win7 will load the current Prolific driver which is programmed to make the counterfeit chip fail. The back dated driver should work perfectly. It can be found at http://www.miklor.com/COM/UV_Drivers.php
2) Use CHIRP’s Latest Daily Build. 0.4.1 came out many months ago and doesn’t support the newer features of many radios.
I hope this helps…
John
From: KB1PWN KB1PWN [mailto:kb1pwn@gmail.com] Sent: Thursday, January 29, 2015 9:11 PM To: chirp_users@intrepid.danplanet.com Cc: tbloomingdale@gmail.com; JohnLa@usa.net Subject: still having trouble with software/drivers for Icom 2200H
I took some screenshots and placed them in a Google doc. Let me know what else I should hunt down/share.
I'm missing something in the setup, but I am committed to figuring this out.
Many thanks to John and Todd for their swift replies.
Seth
https://docs.google.com/presentation/d/1YHJe_5627oxRuNwJa2Pbo8DoLuxCJpo54kgt...
No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5646 / Virus Database: 4273/9020 - Release Date: 01/29/15
participants (4)
-
Jim
-
Jim Unroe
-
John LaMartina
-
KB1PWN KB1PWN