Re: [chirp_users] An error has occurred. Image not supported by radio:
:/ Did this and got this msg: Unsupported firmware version: `N5R340AF8HP-1 I was in the old build that has the three sided box icon?
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jim Unroe Sent: Saturday, September 12, 2015 9:22 PM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] An error has occurred. Image not supported by radio:
Debra, Do not download anything from the KC9HI list. Use your BAO2.img or BAO3.img to upload to radio #1. Jim
On Sun, Sep 13, 2015 at 12:18 AM, dwilson dwilson223@cox.net wrote:
I am not sure which image to select in kc9hi list. The closet I see is N5R3403 but mine was N5R340A.
What should I do?
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jim Unroe Sent: Saturday, September 12, 2015 8:36 PM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] An error has occurred. Image not supported by radio:
Debra,
On Sat, Sep 12, 2015 at 11:06 PM, dwilson dwilson223@cox.net wrote:
Ok, rats, and I thot I was doing so good... have no idea where the other firmware came from because I don't own any other radios and have never been in chirp before today, but nevertheless...
The radio probably got a bad load at the factory.
May I ask how you could tell about the BFB firmware?
The memory layout changed when going from BFB firmware to N5R firmware. They are not compatible an image from one to a radio of another is not good. So if CHIRP detects this, it aborts the upload.
I would like to confirm I understand what needs done here before I do it.
So now I need to actually upload an old build (7-14-2014) into chirp.
Yes. You can use the "win32.zip" version. Just extract it anywhere convenient. That way it won't mess with your current CHIRP. Just find and double click on the "chirpw.exe" file.
The old version is needed because it doesn't have the check that keeps you from uploading the wrong image into your radio. Without the old version, uploading the BAO2.img into radio #1 would fail.
Then I go to the KC9HI site and click on the F5R3407 BF-F8HP(150319N) (factory) img and that will load the factory image into chirp? (if I don't have the old build loaded this wont work?) and then I need to upload the factory file into radio 1 and then I have to reload the latest
chirp build.
Do I have that right?
Not exactly. You don't need to download anything because you can upload your image from radio #2 or radio #3. Then once you are successful, you can remove the folder that the 7-14-2014 version of CHIRP
is in.
Will the other images I currently have in chirp be deleted when I load the old version?
Not if you do it the way I just explained to do it.
So grateful for your help...
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jim Unroe Sent: Saturday, September 12, 2015 6:06 PM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] An error has occurred. Image not supported by radio:
Debra,
Yes. The squelch settings were changed in radio #1.
All three radios have the same N5R340A firmware. You should be able to able to upload an image from any one of them to any one of the others.
The reason you can't (and it is a good thing you can't) is because someone has uploaded and image from a radio with BFB firmware into radio #1. It probably doesn't receive signal without pressing the [MONI] button. You definitely do not want to upload BAO1.img into radio #2
or radio #3.
You need to follow the procedure in the link below and upload either BAO2.img or BAO3.img (they are both identical) into radio #1.
http://www.miklor.com/uv5r/UV5R-Recovery.php#N5R
Once radio #1 if fixed, be sure to upgrade back to the latest CHIRP daily build.
Jim KC9HI
On Sat, Sep 12, 2015 at 8:40 PM, dwilson dwilson223@cox.net wrote:
You know, I think on the first radio I might have changed the service
settings before I actually saved the first file...
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.6086 / Virus Database: 4419/10627 - Release Date: 09/12/15
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.6086 / Virus Database: 4419/10627 - Release Date: 09/12/15
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
----- No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.6086 / Virus Database: 4419/10627 - Release Date: 09/12/15
Debra,
I was afraid of that. I will contact you direct with assistance.
Jim
On Sun, Sep 13, 2015 at 1:10 AM, dwilson dwilson223@cox.net wrote:
:/ Did this and got this msg: Unsupported firmware version: `N5R340AF8HP-1 I was in the old build that has the three sided box icon?
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jim Unroe Sent: Saturday, September 12, 2015 9:22 PM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] An error has occurred. Image not supported by radio:
Debra, Do not download anything from the KC9HI list. Use your BAO2.img or BAO3.img to upload to radio #1. Jim
On Sun, Sep 13, 2015 at 12:18 AM, dwilson dwilson223@cox.net wrote:
I am not sure which image to select in kc9hi list. The closet I see is N5R3403 but mine was N5R340A.
What should I do?
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jim Unroe Sent: Saturday, September 12, 2015 8:36 PM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] An error has occurred. Image not supported by radio:
Debra,
On Sat, Sep 12, 2015 at 11:06 PM, dwilson dwilson223@cox.net wrote:
Ok, rats, and I thot I was doing so good... have no idea where the other firmware came from because I don't own any other radios and have never been in chirp before today, but nevertheless...
The radio probably got a bad load at the factory.
May I ask how you could tell about the BFB firmware?
The memory layout changed when going from BFB firmware to N5R firmware. They are not compatible an image from one to a radio of another is not good. So if CHIRP detects this, it aborts the upload.
I would like to confirm I understand what needs done here before I do it.
So now I need to actually upload an old build (7-14-2014) into chirp.
Yes. You can use the "win32.zip" version. Just extract it anywhere convenient. That way it won't mess with your current CHIRP. Just find and double click on the "chirpw.exe" file.
The old version is needed because it doesn't have the check that keeps you from uploading the wrong image into your radio. Without the old version, uploading the BAO2.img into radio #1 would fail.
Then I go to the KC9HI site and click on the F5R3407 BF-F8HP(150319N) (factory) img and that will load the factory image into chirp? (if I don't have the old build loaded this wont work?) and then I need to upload the factory file into radio 1 and then I have to reload the latest
chirp build.
Do I have that right?
Not exactly. You don't need to download anything because you can upload your image from radio #2 or radio #3. Then once you are successful, you can remove the folder that the 7-14-2014 version of CHIRP
is in.
Will the other images I currently have in chirp be deleted when I load the old version?
Not if you do it the way I just explained to do it.
So grateful for your help...
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jim Unroe Sent: Saturday, September 12, 2015 6:06 PM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] An error has occurred. Image not supported by radio:
Debra,
Yes. The squelch settings were changed in radio #1.
All three radios have the same N5R340A firmware. You should be able to able to upload an image from any one of them to any one of the others.
The reason you can't (and it is a good thing you can't) is because someone has uploaded and image from a radio with BFB firmware into radio #1. It probably doesn't receive signal without pressing the [MONI] button. You definitely do not want to upload BAO1.img into radio #2
or radio #3.
You need to follow the procedure in the link below and upload either BAO2.img or BAO3.img (they are both identical) into radio #1.
http://www.miklor.com/uv5r/UV5R-Recovery.php#N5R
Once radio #1 if fixed, be sure to upgrade back to the latest CHIRP daily build.
Jim KC9HI
On Sat, Sep 12, 2015 at 8:40 PM, dwilson dwilson223@cox.net wrote:
You know, I think on the first radio I might have changed the service
settings before I actually saved the first file...
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.6086 / Virus Database: 4419/10627 - Release Date: 09/12/15
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.6086 / Virus Database: 4419/10627 - Release Date: 09/12/15
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.6086 / Virus Database: 4419/10627 - Release Date: 09/12/15
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (2)
-
dwilson -
Jim Unroe